Add office photos
Aarvi Encon logo
Employer?
Claim Account for FREE

Aarvi Encon

3.9
based on 806 Reviews
Video summary
Filter interviews by
Mechanical Engineer
Clear (1)

10+ Aarvi Encon Mechanical Engineer Interview Questions and Answers

Updated 14 Nov 2024

Q1. 4). How you will measure the clearance for big end bearing ?

Ans.

The clearance for big end bearing can be measured using a micrometer or a feeler gauge.

  • Use a micrometer to measure the diameter of the crankshaft journal and the inner diameter of the big end bearing. The clearance is calculated by subtracting the crankshaft journal diameter from the bearing inner diameter.

  • Alternatively, a feeler gauge can be used to measure the clearance by inserting the gauge between the crankshaft journal and the bearing and checking for the appropriate ga...read more

View 1 answer
right arrow

Q2. 2). What is TDC and BDC and how do you understand about it?

Ans.

TDC stands for Top Dead Center and BDC stands for Bottom Dead Center. They are reference points in the rotation of an engine's crankshaft.

  • TDC is the point where the piston is at its highest position in the cylinder during the compression stroke.

  • BDC is the point where the piston is at its lowest position in the cylinder during the exhaust stroke.

  • Understanding TDC and BDC is crucial for timing engine components such as valves and ignition.

  • TDC and BDC are used to determine the p...read more

Add your answer
right arrow

Q3. 3). How you will measure clearance of TDC and BDC for vertical reciprocating compressor ?

Ans.

The clearance of TDC and BDC for a vertical reciprocating compressor can be measured using a dial indicator.

  • Use a dial indicator to measure the distance between the top dead center (TDC) and bottom dead center (BDC) positions of the piston.

  • Rotate the crankshaft to bring the piston to TDC and set the dial indicator to zero.

  • Rotate the crankshaft to bring the piston to BDC and note the reading on the dial indicator.

  • The difference between the readings at TDC and BDC will give you...read more

Add your answer
right arrow

Q4. 5). What thing should focus during the suction and discharge valve box up ?

Ans.

Focus on proper alignment, tightness, material compatibility, and proper torque during suction and discharge valve box up.

  • Ensure proper alignment of the valves to prevent leakage

  • Check for tightness of the connections to avoid any leaks

  • Use materials compatible with the fluid being handled to prevent corrosion or damage

  • Apply the correct torque to the bolts to ensure a secure connection

Add your answer
right arrow
Discover Aarvi Encon interview dos and don'ts from real experiences

Q5. What do you know about equipment installation?

Ans.

Equipment installation involves setting up machinery and ensuring it operates correctly.

  • Understanding technical specifications and blueprints

  • Assembling and connecting components

  • Testing and troubleshooting

  • Adhering to safety regulations

  • Collaborating with other professionals

  • Examples: installing HVAC systems, manufacturing equipment, or production lines

Add your answer
right arrow

Q6. How many year you have been working on piping engineer

Ans.

I have been working as a piping engineer for 5 years.

  • I have 5 years of experience working specifically as a piping engineer.

  • During this time, I have gained expertise in designing, analyzing, and implementing piping systems.

  • I have worked on various projects that involved piping design, layout, and maintenance.

  • I have also collaborated with other engineers and professionals to ensure the successful completion of projects.

View 1 answer
right arrow
Are these interview questions helpful?

Q7. Pressure gauges ranges and requirements.

Ans.

Pressure gauges are used to measure the pressure of fluids and gases in various industries.

  • Pressure gauges come in different ranges depending on the application.

  • The range of a pressure gauge should be selected based on the maximum pressure expected in the system.

  • The accuracy of the pressure gauge should also be considered when selecting a gauge.

  • Pressure gauges should be calibrated regularly to ensure accurate readings.

  • Some common pressure gauge ranges include 0-100 psi, 0-500...read more

Add your answer
right arrow

Q8. Have you work on piping

Ans.

Yes, I have experience working on piping in various projects.

  • I have designed piping systems for industrial plants

  • I have conducted stress analysis on piping systems

  • I have worked on troubleshooting and maintenance of piping systems

View 1 answer
right arrow
Share interview questions and help millions of jobseekers 🌟
man with laptop

Q9. What is current CTC

Ans.

Current CTC refers to the total salary package of an individual including all benefits and allowances.

  • Current CTC includes base salary, bonuses, incentives, and other perks.

  • It is important to provide an accurate figure when asked about current CTC.

  • Example: Current CTC is INR 10 lakhs per annum.

Add your answer
right arrow

Q10. How many types vale

Ans.

There are several types of valves used in mechanical engineering for controlling the flow of fluids or gases.

  • Types of valves include ball valves, gate valves, globe valves, butterfly valves, check valves, and pressure relief valves.

  • Valves can be classified based on their function (e.g. isolation valves, control valves), design (e.g. rotary valves, linear valves), or material (e.g. brass valves, stainless steel valves).

  • Each type of valve has specific applications and advantage...read more

Add your answer
right arrow

Q11. Requirement of hydrotest

Ans.

Hydrotest is a pressure test conducted on pipes, vessels, or equipment to ensure their strength and integrity.

  • Hydrotest is required to ensure that the equipment can withstand the design pressure and prevent leaks or failures.

  • It involves filling the equipment with water or other fluids and pressurizing it to a specified level for a certain duration.

  • The pressure is then released, and the equipment is inspected for any leaks or deformations.

  • Hydrotest is mandatory for new install...read more

Add your answer
right arrow
Contribute & help others!
Write a review
Write a review
Share interview
Share interview
Contribute salary
Contribute salary
Add office photos
Add office photos

Interview Process at Aarvi Encon Mechanical Engineer

based on 8 interviews
2 Interview rounds
Resume Shortlist Round
HR Round
View more
interview tips and stories logo
Interview Tips & Stories
Ace your next interview with expert advice and inspiring stories

Top Mechanical Engineer Interview Questions from Similar Companies

HCLTech Logo
3.5
 • 11 Interview Questions
View all
Recently Viewed
LIST OF COMPANIES
Credit Bajaar
Overview
PHOTOS
InsuranceDekho
3 office photos
INTERVIEWS
Team Lease
No Interviews
INTERVIEWS
Experis IT
No Interviews
INTERVIEWS
Conneqt Business Solutions
No Interviews
INTERVIEWS
HDFC Life
No Interviews
INTERVIEWS
Experis IT
No Interviews
INTERVIEWS
Experis IT
No Interviews
INTERVIEWS
Experis IT
No Interviews
INTERVIEWS
Experis IT
No Interviews
Share an Interview
Stay ahead in your career. Get AmbitionBox app
play-icon
play-icon
qr-code
Helping over 1 Crore job seekers every month in choosing their right fit company
75 Lakh+

Reviews

5 Lakh+

Interviews

4 Crore+

Salaries

1 Cr+

Users/Month

Contribute to help millions

Made with ❤️ in India. Trademarks belong to their respective owners. All rights reserved © 2024 Info Edge (India) Ltd.

Follow us
  • Youtube
  • Instagram
  • LinkedIn
  • Facebook
  • Twitter