AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Yoshika Engineering Electrician Interview Questions, Process, and Tips
Yoshika Engineering Electrician Interview Experiences
1 interview found
Anonymous
Selected
I applied via Approached by Company and was interviewed in Nov 2024. There were 3 interview rounds.
(4 Questions)
- Q1. What is 3 phase supply
- Ans.
3 phase supply is a type of electrical power transmission that utilizes three alternating currents.
Consists of three conductors carrying three alternating currents with a phase difference of 120 degrees
Commonly used in industrial and commercial settings for powering heavy machinery and equipment
Provides a more balanced power distribution compared to single-phase supply
Allows for higher power transmission efficiency and...
- Q2. Different between auto manual
- Ans.
Auto manual refers to automatic and manual transmission in vehicles.
Auto transmission shifts gears automatically without driver input
Manual transmission requires driver to shift gears using a clutch pedal and gear stick
Auto is easier to drive in traffic, manual gives more control over gear selection
Auto is more common in modern cars, manual is preferred by some for performance driving
- Q3. What is the change over for DG andMSEB
- Ans.
Change over for DG and MSEB refers to the process of switching power supply from a diesel generator to the Maharashtra State Electricity Board grid.
Change over for DG and MSEB is necessary during power outages or maintenance work.
It involves switching the power source from the diesel generator to the MSEB grid or vice versa.
Proper synchronization and safety measures are crucial during the changeover process.
The changeo...
- Q4. What is the automation
- Ans.
Automation refers to the use of technology to control and monitor processes without human intervention.
Automation involves the use of control systems such as computers or robots to perform tasks traditionally done by humans.
Examples of automation include smart home devices like thermostats and security systems, industrial robots in manufacturing plants, and self-driving cars.
Automation can increase efficiency, accuracy
(2 Questions)
- Q1. What is your name
- Ans.
My name is John Smith.
Full name is John Smith
Common name in English-speaking countries
Easy to remember and pronounce
- Q2. What is your salary expectations
- Ans.
My salary expectations are based on my experience, qualifications, and the industry standard for electricians.
Consider my level of experience and qualifications
Research the industry standard for electricians in this area
Be open to negotiation based on benefits and opportunities for growth
Explain your experience joinery
Interview Preparation Tips
- Industrial Automation
- Control wiring
- Controling fault finding
Top trending discussions
Interview questions from similar companies
Associate Interview Questions & Answers
Rheinmetall Automotive
Nikhil P Patrike
posted on 2 Jul 2022
(1 Question)
- Q1. Project experience and acheivements
(1 Question)
- Q1. Managerial skills and handling of team
(1 Question)
- Q1. Union handling and pressure handling
Interview Preparation Tips
(2 Questions)
- Q1. About electronics component
- Q2. What is rectifier and how does work it?
- Ans.
A rectifier is an electronic device that converts AC to DC voltage.
Rectifiers are used in power supplies to convert AC voltage to DC voltage.
They are commonly used in electronic devices such as radios, televisions, and computers.
There are two types of rectifiers: half-wave and full-wave.
Half-wave rectifiers only allow half of the AC waveform to pass through, while full-wave rectifiers allow the entire waveform to pass ...
I applied via Walk-in and was interviewed in Dec 2021. There were 2 interview rounds.
(1 Question)
- Q1. Did you have any experience?
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Apr 2023. There was 1 interview round.
(1 Question)
- Q1. What is half wave rectifier
- Ans.
A half wave rectifier is a circuit that converts AC voltage into pulsating DC voltage by allowing only one half of the input waveform to pass through.
Converts AC voltage to pulsating DC voltage
Allows only one half of the input waveform to pass through
Uses a diode to achieve rectification
Output voltage is not constant, but pulsating
Commonly used in low-power applications
I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 2 interview rounds.
(1 Question)
- Q1. Basic c questions and communication protocol knowledge.
(1 Question)
- Q1. What are your salary expectations?
Interview Preparation Tips
Interview Preparation Tips
Experience: Written round was offline consist of 90 questions to be solved in 90 min and asked section wise : tech, GK+ quant and C. (3 section 30 quest each)
Tips: FOR WRITTEN ROUND :- Most IMPORTANT part of placement is WRITTEN round, we were around 60+ students in total and out of which only 7 were selected for further rounds.. key to crack :- Attempt all the questions (if there is no neg marking) and try to answer the questions accurately.
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: questions asked to me :- 1)Tell me about urself 2)About my internship and then suddenly he started asked questions from C- 3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN? 4)Diff btw char array and int array?Then he switched to embedded system- 5)What are INTERRUPT?, EEPROM? , BAUD RATE? 6)About my Projects 7)Favourite subjects and questions from it (do prepare atleast 2 subjects very well) 8)What is electronics, Telecommunication? 9)diff btw ETNT AND ECE?10)what is your STRENGTH AND WEAKNESS(support your answer with example) 11)where do u see urslf 5 yr from now? 12) hobby? 13) low pointer? then he asked me to ask question: i have asked 2 question: 14)who is your biggest competitor? 15)what is the hierarchy of this job post?
Tips: They will focus on 2 things only :
i)C(most imp) : even it is a core elex company but they will not going to take you if you dont know Cii) PROJECTS: Projects on EMBEDDED SYSTEMS only, more no of projects greater is the chance of your selection and try to explain them in detail as much as u can.
Round: HR Interview
Experience: it was just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join the company or not
Tips: Have PATIENCE and have faith in urself because " CHANCE IS NEVER LAST IT'S ALWAYS SECOND LAST"
Skill Tips: No doubt if u have good cpi u will get the benifit but for the core companies there is alternative to pointer that is GOOD PROJECTS and always remember nothing is more important than "CONFIDENCE" because confidence doesnt come when u know all the answer but it comes when u ready to face all the question .BEST OF LUCK \m/
College Name: NIT RAIPUR
(3 Questions)
- Q1. Quality assurance
- Q2. R&D lab and 7qc
- Q3. Quality g&t tolerance
Lab test and technology quality
(1 Question)
- Q1. Automotive field Related questions
Interview Preparation Tips
Kavya Santhosh
(1 Question)
- Q1. Automotive related C Embedded C
Interview Preparation Tips
C
Embedded C
C++
linux
Yoshika Engineering Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- ITI Electrician Interview Questions
- Maintenance Electrician Interview Questions
- Senior Electrician Interview Questions
- Electrician Maintenance Technician Interview Questions
- Industrial Electrician Interview Questions
- ITI Electrician, Electrical Maintenance Interview Questions
- Electrical Technician Electrician Interview Questions
- Electrician.I.T.I Interview Questions
- Show more
Yoshika Engineering Electrician Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Yoshika Engineering Electrician Reviews and Ratings
based on 1 review
Rating in categories
|
QA Engineer
14
salaries
|  ₹1.8 L/yr - ₹3.5 L/yr |
|
Production Supervisor
12
salaries
| ₹2 L/yr - ₹3.6 L/yr |
|
Quality Engineer
11
salaries
| ₹1.5 L/yr - ₹4.2 L/yr |
|
Executive Accountant
8
salaries
| ₹1.9 L/yr - ₹3.5 L/yr |
|
Maintenance Engineer
7
salaries
| ₹3.4 L/yr - ₹6 L/yr |
Caparo Engineering India
Marelli
Enco Engineers Combine
Seoyon E-hwa Automotive
- Home >
- Interviews >
- Yoshika Engineering Interview Questions >
- Yoshika Engineering Electrician Interview Questions
