Upload Button Icon Add office photos

Filter interviews by

West Bengal Chemical Industries Process Engineer Interview Questions and Answers

Updated 17 Mar 2024

West Bengal Chemical Industries Process Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Function of GR and GLR, and also how we face the breakdown
  • Ans. 

    GR stands for Gas Recirculation and GLR stands for Gas Liquid Ratio. They are important parameters in process engineering.

    • GR is used to control the amount of gas recirculated in a process, helping to optimize efficiency and reduce emissions.

    • GLR is the ratio of gas to liquid in a process, which affects the overall performance and efficiency of the system.

    • Breakdown in GR can occur due to issues with the recirculation pum...

  • Answered by AI

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Line sizing, pump hydraulics
  • Q2. Heat exchanger design
  • Ans. 

    Heat exchanger design involves selecting appropriate materials, determining heat transfer coefficients, and optimizing flow rates.

    • Consider the type of fluid being used and its properties

    • Choose materials that can withstand the temperature and pressure of the fluids

    • Calculate the heat transfer coefficients for each fluid

    • Optimize the flow rates to maximize heat transfer efficiency

    • Consider the overall size and cost of the h

  • Answered by AI

I applied via Referral and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Heat Transfer Related question
  • Q2. Training Related Question

Interview Preparation Tips

Interview preparation tips for other job seekers - basic knowledge of heat and mass transfer
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about your information
Round 3 - One-on-one 

(1 Question)

  • Q1. What is your present profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard work
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Hydraulic troubleshooting
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Jul 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related to piping , project, maintenance
Round 3 - HR 

(1 Question)

  • Q1. Current organization, job profile etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepared for piping, plant and maintenance activities

I applied via Company Website and was interviewed in May 2021. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Self introduction and some technical questions like weldings and it's types ,some of there from thermodynamics and fluid mechanics.Also about uniqueness and skills,aims and hobbies. Interviewer also asking...

Interview Preparation Tips

Interview preparation tips for other job seekers - Just keep your confidence level as much High and make eye contact for good impaction, keep answering with examples and show enthusiasm, energy and behave like an active person. Express yourself with freshness for impression and meeting should be like familier with each and every one.
If you are unable to answer for any questions just say sorry without any hesitation.
That's all
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Types of pump and the troubleshooting?
  • Ans. 

    Types of pumps include centrifugal, reciprocating, and rotary pumps. Troubleshooting involves checking for leaks, low flow rates, and abnormal noises.

    • Centrifugal pumps use rotating impellers to create flow.

    • Reciprocating pumps use a piston or diaphragm to create flow.

    • Rotary pumps use rotating mechanisms to create flow.

    • Troubleshooting involves checking for leaks in the pump system.

    • Troubleshooting involves checking for lo...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is 321 principle in GD&T
  • Ans. 

    The 321 principle in GD&T refers to the rule that a feature must be within a specified tolerance zone defined by three datums.

    • 321 principle states that a feature must be located within a tolerance zone defined by three datums

    • The first datum constrains movement in one direction, the second datum constrains movement in a second direction, and the third datum constrains movement in a third direction

    • This principle ensures ...

  • Answered by AI
  • Q2. How you ensure quality of product
  • Ans. 

    Quality of product is ensured through rigorous testing, adherence to standards, continuous improvement, and collaboration with cross-functional teams.

    • Implementing quality control measures throughout the production process

    • Conducting regular inspections and audits to identify and address any issues

    • Utilizing statistical process control techniques to monitor and improve product quality

    • Collaborating with suppliers to ensure...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected

I applied via Referral and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(7 Questions)

  • Q1. What is pump hydraulic calculation?
  • Ans. 

    Hydraulic calculation for pumps involves determining the flow rate, pressure, power, and efficiency of a pump system.

    • Calculate flow rate using the formula Q = VA, where Q is flow rate, V is velocity, and A is cross-sectional area.

    • Determine pressure using the formula P = F/A, where P is pressure, F is force, and A is area.

    • Calculate power using the formula P = Q*H*rho*g, where P is power, Q is flow rate, H is head, rho i...

  • Answered by AI
  • Q2. What are types of pumps?
  • Ans. 

    Types of pumps include centrifugal pumps, positive displacement pumps, and axial flow pumps.

    • Centrifugal pumps: use a rotating impeller to increase the pressure of a fluid.

    • Positive displacement pumps: trap a fixed amount of fluid and then force it into a discharge pipe.

    • Axial flow pumps: move fluid parallel to the pump shaft.

    • Examples: Centrifugal pump - water pump, Positive displacement pump - diaphragm pump, Axial flow

  • Answered by AI
  • Q3. Explain your achievements?
  • Ans. 

    I have successfully led process improvement projects resulting in cost savings and increased efficiency.

    • Led a team in implementing a new production process that reduced waste by 20%

    • Developed and implemented a new quality control system that improved product quality by 15%

    • Identified and resolved bottlenecks in the production line, increasing output by 10%

  • Answered by AI
  • Q4. Any cost reduction experience related to process plants?
  • Ans. 

    Yes, I have experience in implementing cost reduction strategies in process plants.

    • Implemented lean manufacturing principles to reduce waste and improve efficiency

    • Optimized equipment maintenance schedules to minimize downtime and reduce costs

    • Negotiated better pricing with suppliers to lower material costs

    • Introduced automation technologies to streamline processes and reduce labor costs

  • Answered by AI
  • Q5. Troubleshooting experience in process plants?
  • Ans. 

    I have extensive troubleshooting experience in process plants, identifying and resolving issues to ensure smooth operations.

    • Identifying root causes of process issues

    • Developing and implementing solutions to improve efficiency

    • Collaborating with cross-functional teams to troubleshoot complex problems

    • Utilizing data analysis and problem-solving skills

    • Adapting quickly to changing situations and priorities

  • Answered by AI
  • Q6. Describe Detailed Pump hydraulic calculation?
  • Ans. 

    Pump hydraulic calculation involves determining the pump head, flow rate, and power requirements for a specific system.

    • Calculate total dynamic head (TDH) by adding the static head, friction head, and velocity head

    • Determine the required flow rate based on system requirements

    • Calculate the pump power requirements using the formula: Power (kW) = (Q x TDH) / (3.6 x efficiency)

    • Consider factors such as pump efficiency, pipe s

  • Answered by AI
  • Q7. What is Coefficient of Control valve?
  • Ans. 

    The coefficient of a control valve is a measure of the valve's flow capacity relative to the pressure drop across it.

    • The coefficient of a control valve, also known as the flow coefficient (Cv), is a dimensionless number that represents the flow capacity of the valve for a given pressure drop.

    • It is used to compare the performance of different valves and is typically determined experimentally.

    • A higher coefficient indicat...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. About salary expectation
  • Q2. Reason for job change
  • Ans. 

    Seeking new challenges and opportunities for professional growth.

    • Looking for new challenges to expand my skill set

    • Seeking opportunities for career advancement

    • Interested in working in a different industry or with new technologies

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Chemvap Engineering Private Limited Process Engineer interview:
  • Pumps
  • Control Valves
  • Previous experience
  • Heat Exchangers
  • Steam economy
  • Mass heat balance

West Bengal Chemical Industries Interview FAQs

How many rounds are there in West Bengal Chemical Industries Process Engineer interview?
West Bengal Chemical Industries interview process usually has 1 rounds. The most common rounds in the West Bengal Chemical Industries interview process are Technical.

Tell us how to improve this page.

West Bengal Chemical Industries Process Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Sika Interview Questions
3.7
 • 16 Interviews
Adama Interview Questions
4.1
 • 14 Interviews
Privi Organics Interview Questions
3.6
 • 13 Interviews
Indo Amines Interview Questions
3.0
 • 13 Interviews
View all
Trainee Chemist
7 salaries
unlock blur

₹2 L/yr - ₹2.4 L/yr

Chemist
7 salaries
unlock blur

₹2 L/yr - ₹3 L/yr

QA Executive
6 salaries
unlock blur

₹1.4 L/yr - ₹4.5 L/yr

Analytical Chemist
5 salaries
unlock blur

₹1.8 L/yr - ₹3.5 L/yr

Head of Product
4 salaries
unlock blur

₹11 L/yr - ₹19.2 L/yr

Explore more salaries
Compare West Bengal Chemical Industries with

Adama

4.1
Compare

Synokem Pharmaceuticals

3.8
Compare

Deepak Phenolics

4.4
Compare

Indo Amines

3.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview