i
Vesuvius
Filter interviews by
Clear (1)
Top trending discussions
posted on 19 Mar 2024
I applied via Referral
Bearings and bearing service and assembly
I applied via Company Website and was interviewed before Jul 2021. There were 3 interview rounds.
I was interviewed before Apr 2020.
I applied via Walk-in and was interviewed before May 2020. There was 1 interview round.
I applied via Naukri.com and was interviewed in Apr 2020. There were 4 interview rounds.
A multimeter is an electronic device used to measure voltage, current, and resistance in electrical circuits.
It can measure AC and DC voltage
It can measure AC and DC current
It can measure resistance
It can also measure other electrical parameters such as capacitance and frequency
It typically has a digital display for easy reading
Examples of multimeter brands include Fluke, Klein Tools, and Extech
I applied via Walk-in
I was interviewed before Jan 2024.
Methods for measuring with a micrometer and a vernier caliper
For micrometer: Close the jaws gently around the object being measured, read the measurement from the scale, and add any additional measurements from the thimble.
For vernier caliper: Close the jaws around the object, read the main scale measurement where the zero mark on the vernier scale aligns, then add the vernier scale measurement for precision.
Ensure the...
Casting is a manufacturing process in which a liquid material is poured into a mold, where it solidifies into the desired shape.
Melted material is poured into a mold
The material solidifies and takes the shape of the mold
The mold is then removed to reveal the final product
Cope and drag are the two halves of a mold used in casting processes to create a cavity for the molten metal.
Cope is the top half of the mold, while drag is the bottom half.
The cope and drag are typically made from sand and are used to create a cavity in which the molten metal is poured.
After the metal has solidified, the cope and drag are separated to reveal the casting.
Different types of cylinders include single-acting, double-acting, telescopic, and impact cylinders.
Single-acting cylinders: Operate in one direction using fluid pressure to extend or retract the piston.
Double-acting cylinders: Use fluid pressure to extend and retract the piston in both directions.
Telescopic cylinders: Consist of multiple nested stages that allow for a longer stroke length in a compact design.
Impact cy...
Pneumatic systems use compressed air to transmit power, while hydraulic systems use fluid (usually oil) to transmit power.
Pneumatic systems use air as the working fluid, while hydraulic systems use oil or other fluids.
Pneumatic systems are generally cleaner and easier to maintain than hydraulic systems.
Hydraulic systems can handle higher loads and pressures compared to pneumatic systems.
Pneumatic systems are often used...
Heat exchangers are devices used to transfer heat between two or more fluids, without mixing them together.
Shell and tube heat exchanger
Plate heat exchanger
Double pipe heat exchanger
Finned tube heat exchanger
Spiral heat exchanger
Different types of bearings include ball bearings, roller bearings, plain bearings, and fluid bearings.
Ball bearings are used in applications requiring low friction and high speed, such as in wheels and conveyor belts.
Roller bearings are suitable for heavy radial loads, such as in automotive transmissions and industrial machinery.
Plain bearings, also known as bushings, are used in applications where lubrication is diff...
Heat treatment is a process used to alter the physical and sometimes chemical properties of a material through heating and cooling.
Heat treatment involves heating a material to a specific temperature, holding it at that temperature for a certain amount of time, and then cooling it at a controlled rate.
The process can be used to increase the hardness, strength, toughness, and ductility of a material.
Common heat treatmen...
Defects in casting process include porosity, shrinkage, cold shuts, misruns, and inclusions.
Porosity: air or gas trapped in the casting
Shrinkage: volume reduction during solidification
Cold shuts: incomplete fusion of molten metal
Misruns: incomplete filling of the mold cavity
Inclusions: foreign materials trapped in the casting
Types of sand used in casting include green sand, resin sand, shell mold sand, and sodium silicate sand.
Green sand: most commonly used type, made of silica sand mixed with clay and water
Resin sand: mixed with resin and hardener for better surface finish and dimensional accuracy
Shell mold sand: uses a resin-coated sand that is heated to form a shell around the pattern
Sodium silicate sand: uses sodium silicate as a binde...
I was interviewed in Dec 2024.
How to achieve our target working with our partners
There are three main types of circuit breakers: thermal, magnetic, and thermal-magnetic.
Thermal circuit breakers operate based on the heat generated by excessive current flow.
Magnetic circuit breakers operate based on the strength of the magnetic field produced by excessive current flow.
Thermal-magnetic circuit breakers combine the features of both thermal and magnetic circuit breakers for better protection.
Examples in...
About in project work and how to easily complete our project?
based on 1 review
Rating in categories
Applications Engineer
133
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
36
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
25
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
16
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineering Manager
14
salaries
| ₹0 L/yr - ₹0 L/yr |
Thermax Limited
Grindwell Norton
Carborundum Universal Limited
Aia Engineering