Add office photos
Filter interviews by
V-access (india) Quality Inspector Interview Questions and Answers
V-access (india) Quality Inspector Interview Experiences
1 interview found
Anonymous
I applied via Company Website and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. About my work.. or before done the work..
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company and was interviewed in Oct 2022. There were 2 interview rounds.
(3 Questions)
- Q1. 1. How to check lebel ?
- Ans.
To check the label, inspect the information printed on it for accuracy and completeness.
Verify that all required information is present on the label, such as product name, ingredients, warnings, and usage instructions.
Ensure that the label is legible and easy to read.
Check for any spelling or grammatical errors on the label.
Confirm that the label meets any regulatory requirements or industry standards.
Compare the label...
- Q2. 2. How to check good harnesses ?
- Ans.
To check good harnesses, inspect for proper connections, secure fastenings, correct wire routing, and absence of damage or wear.
Inspect for proper connections between wires and connectors.
Check for secure fastenings, such as properly tightened screws or clamps.
Ensure correct wire routing, with wires organized and protected from potential damage.
Look for any signs of damage or wear, such as frayed wires or broken insula...
- Q3. 3. What's the problem mouth press?
- Ans.
The problem mouth press refers to an issue with the pressing mechanism of a machine used in quality inspection.
The problem could be related to a malfunctioning or misaligned press mechanism.
It could result in inconsistent or incorrect pressure being applied during inspection.
Examples of problems could include a stuck press, uneven pressure distribution, or a faulty sensor.
The issue may lead to inaccurate quality assess
Interview Preparation Tips
- Wiring Harness
I applied via Campus Placement
(2 Questions)
- Q1. 1-What is the least count of vernier caliper and micro meter. 2- Told five name of measuring instruments which you are used in the college life. 3- what is the difference between champer and fllit command...
- Ans.
The least count of vernier caliper is the smallest measurement it can accurately measure. The least count of a micrometer is the smallest measurement it can accurately measure.
The least count of a vernier caliper is typically 0.02 mm or 0.001 inches.
The least count of a micrometer is typically 0.01 mm or 0.001 inches.
Vernier calipers are used to measure dimensions of objects with high accuracy.
Micrometers are used to m...
- Q2. 11-What is the condenser. 12- Told me the working process of AC engine. 13-What is the second law of thermodynamics. 14-What is the third law of thermodynamics. 15-Why are We not use of spark plug in ic en...
Interview Preparation Tips
(3 Questions)
- Q1. How many years of experience do you have
- Ans.
I have 5 years of experience as a Quality Inspector.
I have worked as a Quality Inspector for 5 years.
I have gained extensive experience in inspecting and ensuring the quality of products.
During my time as a Quality Inspector, I have developed strong attention to detail and problem-solving skills.
I am familiar with quality control processes and have successfully implemented improvements in previous roles.
I have a track ...
- Q2. What is your current CTC
- Q3. What is your expectations
- Ans.
My expectations for the Quality Inspector role include a supportive work environment, clear expectations, opportunities for growth, and a focus on continuous improvement.
Supportive work environment: I expect to work in a team-oriented environment where colleagues and supervisors are helpful and collaborative.
Clear expectations: I expect to receive clear guidelines and instructions on quality standards, inspection proce...
Interview Preparation Tips
I applied via campus placement at Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV), Bhopal and was interviewed in Jul 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Basic electrical Questions and Components related Questions
Interview Preparation Tips
I am so happy
Basic Questions ready
About company
It's big company of wirings harness any types of whicel
I applied via Approached by Company and was interviewed in Oct 2022. There were 2 interview rounds.
(3 Questions)
- Q1. 1. How to check lebel ?
- Ans.
To check the label, inspect the information printed on it for accuracy and completeness.
Verify that all required information is present on the label, such as product name, ingredients, warnings, and usage instructions.
Ensure that the label is legible and easy to read.
Check for any spelling or grammatical errors on the label.
Confirm that the label meets any regulatory requirements or industry standards.
Compare the label...
- Q2. 2. How to check good harnesses ?
- Ans.
To check good harnesses, inspect for proper connections, secure fastenings, correct wire routing, and absence of damage or wear.
Inspect for proper connections between wires and connectors.
Check for secure fastenings, such as properly tightened screws or clamps.
Ensure correct wire routing, with wires organized and protected from potential damage.
Look for any signs of damage or wear, such as frayed wires or broken insula...
- Q3. 3. What's the problem mouth press?
- Ans.
The problem mouth press refers to an issue with the pressing mechanism of a machine used in quality inspection.
The problem could be related to a malfunctioning or misaligned press mechanism.
It could result in inconsistent or incorrect pressure being applied during inspection.
Examples of problems could include a stuck press, uneven pressure distribution, or a faulty sensor.
The issue may lead to inaccurate quality assess
Interview Preparation Tips
- Wiring Harness
I applied via Campus Placement
(2 Questions)
- Q1. 1-What is the least count of vernier caliper and micro meter. 2- Told five name of measuring instruments which you are used in the college life. 3- what is the difference between champer and fllit command...
- Ans.
The least count of vernier caliper is the smallest measurement it can accurately measure. The least count of a micrometer is the smallest measurement it can accurately measure.
The least count of a vernier caliper is typically 0.02 mm or 0.001 inches.
The least count of a micrometer is typically 0.01 mm or 0.001 inches.
Vernier calipers are used to measure dimensions of objects with high accuracy.
Micrometers are used to m...
- Q2. 11-What is the condenser. 12- Told me the working process of AC engine. 13-What is the second law of thermodynamics. 14-What is the third law of thermodynamics. 15-Why are We not use of spark plug in ic en...
Interview Preparation Tips
(3 Questions)
- Q1. How many years of experience do you have
- Ans.
I have 5 years of experience as a Quality Inspector.
I have worked as a Quality Inspector for 5 years.
I have gained extensive experience in inspecting and ensuring the quality of products.
During my time as a Quality Inspector, I have developed strong attention to detail and problem-solving skills.
I am familiar with quality control processes and have successfully implemented improvements in previous roles.
I have a track ...
- Q2. What is your current CTC
- Q3. What is your expectations
- Ans.
My expectations for the Quality Inspector role include a supportive work environment, clear expectations, opportunities for growth, and a focus on continuous improvement.
Supportive work environment: I expect to work in a team-oriented environment where colleagues and supervisors are helpful and collaborative.
Clear expectations: I expect to receive clear guidelines and instructions on quality standards, inspection proce...
Interview Preparation Tips
I applied via campus placement at Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV), Bhopal and was interviewed in Jul 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Basic electrical Questions and Components related Questions
Interview Preparation Tips
I am so happy
Basic Questions ready
About company
It's big company of wirings harness any types of whicel
Tell us how to improve this page.
V-access (india) Interviews By Designations
- V-access (india) Graduate Engineer Trainee (Get) Interview Questions
- V-access (india) Production Interview Questions
- V-access (india) Purchase Executive Interview Questions
- V-access (india) Quality Inspector Interview Questions
- V-access (india) Senior Production Engineering Manager Interview Questions
Interview Questions for Popular Designations
- QC Inspector Interview Questions
- QA QC Inspector Interview Questions
- Quality Control Inspector Interview Questions
- Inspection Engineer Interview Questions
- Quality Assurance Inspector Interview Questions
- Quality Line Inspector Interview Questions
- Senior Quality Inspector Interview Questions
- Welding Inspector Interview Questions
- Show more
Interview Questions from Similar Companies
V-access (india) Quality Inspector Reviews and Ratings
based on 1 review
Rating in categories
|
Quality Engineer
18
salaries
|  ₹1.8 L/yr - ₹3.5 L/yr |
|
Production Engineer
12
salaries
| ₹2 L/yr - ₹3.8 L/yr |
|
Engineer
5
salaries
| ₹1.7 L/yr - ₹3 L/yr |
|
Executive Accountant
5
salaries
| ₹1.8 L/yr - ₹4.8 L/yr |
|
Graduate Engineer Trainee (Get)
4
salaries
| ₹1.7 L/yr - ₹2 L/yr |
Tech Mahindra
HCLTech
TCS
Wipro
- Home >
- Interviews >
- V-access (india) Interview Questions >
- V-access (india) Quality Inspector Interview Questions
