Filter interviews by
Aptitude Test taking by Experienced Person like Head of Dept., GM, Auditors, Deputy Controller etc.
Top trending discussions
posted on 7 Sep 2022
I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.
posted on 11 Feb 2021
I applied via Campus Placement and was interviewed before Feb 2020. There were 5 interview rounds.
Cube mould size is a standard size used for testing the compressive strength of concrete.
Cube moulds are typically made of steel or cast iron.
The standard size for cube moulds is 150mm x 150mm x 150mm.
Other sizes such as 100mm x 100mm x 100mm and 200mm x 200mm x 200mm are also used.
The moulds are filled with concrete and left to cure before being tested for compressive strength.
Cube moulds are used to ensure that the c...
To calculate the weight of an 8mm diameter steel rod, use the formula: weight = volume x density.
Calculate the volume of the rod using the formula: volume = π x (diameter/2)^2 x length
Find the density of steel, which is typically around 7850 kg/m^3
Multiply the volume by the density to get the weight of the rod
posted on 25 Jun 2021
I applied via Company Website and was interviewed before Jun 2020. There were 3 interview rounds.
I applied via Campus Placement and was interviewed in Dec 2024. There was 1 interview round.
The standard dimensions of a brick are 3 5/8 inches x 2 1/4 inches x 8 inches.
Standard brick size is 3 5/8 inches x 2 1/4 inches x 8 inches
Bricks can also come in different sizes based on region or purpose
Common brick sizes include modular, jumbo, and queen
The water-cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
It is a crucial factor in determining the strength and durability of concrete.
A lower water-cement ratio results in stronger and more durable concrete.
The typical range for water-cement ratio is between 0.4 to 0.6.
Excessive water in the mix can lead to lower strength and durability of concrete.
Heat of hydration is the heat released when water is added to cement during the chemical reaction of hydration.
Heat of hydration is the heat released when water is added to cement during the chemical reaction of hydration.
It is an exothermic reaction, meaning it releases heat.
The heat of hydration is important to consider in concrete construction to prevent cracking and ensure proper curing.
Higher heat of hydration can...
Curing is the process of maintaining adequate moisture and temperature in concrete to ensure proper hydration and strength development.
Curing helps prevent cracking and ensures the concrete reaches its full strength potential.
Common curing methods include water curing, membrane curing, and curing compounds.
Proper curing typically lasts for at least 7 days, but can vary depending on the type of concrete mix and environm
Footing is the bottommost part of a foundation that distributes the load of the structure to the soil.
Footing is typically made of concrete and is wider than the foundation walls to provide stability.
Foundations are the lower portion of a building structure that transfers the load to the soil.
There are different types of foundations such as shallow foundations (like spread footings) and deep foundations (like piles).
One way slab is supported on two opposite sides while two way slab is supported on all four sides.
One way slab is designed to carry loads along one direction only
Two way slab is designed to carry loads along both directions
One way slab is supported on two opposite sides
Two way slab is supported on all four sides
I applied via Walk-in and was interviewed in Jun 2023. There were 6 interview rounds.
Planning is best way of working style and complete the job very quality work.
Construction manager discussion with start work .
Any work start before discussion with lovour and supervisor .
Group discussion is most important the work will be start the don't any problem
posted on 1 Jul 2024
There are mainly four types of foundations: shallow, deep, pile, and raft.
Shallow foundations are used when the soil is strong enough to support the structure's weight close to the surface.
Deep foundations are used when the soil is weak and the structure needs to be supported at a greater depth.
Pile foundations involve driving piles into the ground to support the structure.
Raft foundations are large slabs that support ...
posted on 24 May 2023
I applied via Campus Placement and was interviewed in Nov 2022. There were 3 interview rounds.
Opinions and conclusions
posted on 14 Aug 2023
I was interviewed before Aug 2022.
The thickness of outer side plaster can vary depending on the specific requirements of the project.
The thickness of outer side plaster is typically around 15-20 mm.
However, it can be adjusted based on factors such as the type of building, weather conditions, and structural requirements.
Consulting with a structural engineer or architect is recommended to determine the appropriate thickness for the outer side plaster.
Grade of concrete for RCC is typically M20, M25, M30, etc. which represent the compressive strength of concrete mix.
Grade of concrete is denoted by the mix ratio of cement, sand, and aggregates.
Common grades include M20, M25, M30, etc. where 'M' stands for mix and the number represents the compressive strength in MPa.
Higher grade concrete like M30 is used for structures requiring higher strength like bridges, dams, etc...
posted on 7 Oct 2021
The size of bricks varies depending on the country and region they are used in.
In the United States, the standard size for bricks is 2 1/4 x 3 3/4 x 8 inches.
In the United Kingdom, the standard size for bricks is 65mm x 102.5mm x 215mm.
Bricks can also come in different shapes and sizes for specific purposes, such as bullnose bricks for rounded edges.
The size of bricks can affect the strength and stability of a structur...
Engineer
87
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
74
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Engineer
64
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Site Engineer
62
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Engineer
61
salaries
| ₹0 L/yr - ₹0 L/yr |
Jain Irrigation Systems
Supreme Industries
Finolex Industries
KSB Limited - Irrigation & Process Division (IPD)