Upload Button Icon Add office photos

TDS Lithium-Ion Battery

Compare button icon Compare button icon Compare

Filter interviews by

TDS Lithium-Ion Battery Tool Room Engineer Interview Questions, Process, and Tips

Updated 29 Nov 2024

TDS Lithium-Ion Battery Tool Room Engineer Interview Experiences

1 interview found

Tool Room Engineer Interview Questions & Answers

user image Santosh kumar Biswal

posted on 29 Nov 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. What is the difference between blanking, piercing, drawing?
  • Ans. 

    Blanking cuts out a flat shape from a metal sheet, piercing creates a hole in the sheet, and drawing stretches the metal into a desired shape.

    • Blanking involves cutting out a flat shape from a metal sheet.

    • Piercing creates a hole in the metal sheet.

    • Drawing stretches the metal into a desired shape, often using a die and punch set.

    • Examples: Blanking - cutting out a washer shape from a metal sheet, Piercing - creating holes...

  • Answered by AI
  • Q2. Difference between milling machine and turning machine?
  • Ans. 

    Milling machine removes material by rotating a cutting tool, while turning machine removes material by rotating the workpiece.

    • Milling machine uses a cutting tool that moves in all three dimensions to remove material from the workpiece.

    • Turning machine rotates the workpiece while a cutting tool removes material to create cylindrical shapes.

    • Milling machine is used for creating complex shapes like gears, while turning mach...

  • Answered by AI
  • Q3. What is grinding machine and what are the basic functions available in grinding machine panel?
  • Ans. 

    A grinding machine is a tool used for removing material from a workpiece by abrasion, typically using a rotating wheel.

    • Basic functions in a grinding machine panel include speed control, wheel dressing, coolant system, and feed control.

    • Speed control allows for adjusting the rotation speed of the grinding wheel.

    • Wheel dressing involves shaping the grinding wheel to the desired form.

    • Coolant system helps in reducing heat ge...

  • Answered by AI
  • Q4. Clearance between punch and die?
  • Ans. 

    Clearance between punch and die is crucial for proper operation and quality of the finished product.

    • Clearance should be determined based on material type and thickness

    • Typical clearance ranges from 5% to 20% of material thickness

    • Insufficient clearance can lead to burrs or damage to the tooling

    • Excessive clearance can result in poor quality cuts or premature tool wear

  • Answered by AI
Round 2 - One-on-one 

(3 Questions)

  • Q1. Question related to previous experience
  • Q2. How to handle a team?
  • Q3. What is TPM and clita?
  • Ans. 

    TPM stands for Total Productive Maintenance and CLITA stands for Cleanliness, Lubrication, Inspection, Tightening, and Adjustment.

    • TPM is a proactive approach to maintenance that aims to maximize equipment effectiveness and minimize downtime.

    • CLITA is a set of activities focused on maintaining equipment in optimal condition by ensuring cleanliness, proper lubrication, regular inspection, tightening of components, and adj...

  • Answered by AI

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Type of personality test

Round 2 - HR 

(4 Questions)

  • Q1. Major achievements
  • Ans. 

    Led a team to successfully implement a new software system, resulting in a 20% increase in efficiency.

    • Led team in implementing new software system

    • Achieved 20% increase in efficiency

    • Received recognition for successful project completion

  • Answered by AI
  • Q2. Project handling
  • Q3. Team management
  • Q4. How to solve any peroblem
  • Ans. 

    To solve any problem, break it down into smaller parts, analyze the root cause, brainstorm solutions, and implement the best one.

    • Break down the problem into smaller, manageable parts

    • Identify the root cause of the problem

    • Brainstorm potential solutions

    • Evaluate and choose the best solution

    • Implement the chosen solution and monitor its effectiveness

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Make your resume as per your knowledge only (don’t add unknown topics that you don’t have any knowledge)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Information about agriculture starters?
  • Ans. 

    Agriculture starters are products or materials used to initiate plant growth and development.

    • Agriculture starters can include seeds, seedlings, fertilizers, and growth hormones.

    • They are essential for establishing healthy crops and maximizing yield.

    • Examples of agriculture starters include potting soil, compost, and plant nutrients.

  • Answered by AI
  • Q2. Which area looking?

Interview Preparation Tips

Interview preparation tips for other job seekers - Good environment, behavior and helping nature staff
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2023. There were 5 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Questions related to your job work and technical based on your resume.
Round 2 - Quality 

(1 Question)

  • Q1. Quality related questions and from your resume.
Round 3 - Technical 

(1 Question)

  • Q1. General Questions with Plant Manager.
Round 4 - Technical 

(1 Question)

  • Q1. General Questions with VP- Operations.
Round 5 - HR 

(1 Question)

  • Q1. General introduction and other HR related interactions.

Interview Questionnaire 

1 Question

  • Q1. Technical knowledge of transformers in depth.
Round 1 - One-on-one 

(1 Question)

  • Q1. Basic questions people struggle to speak English though
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
  • Ans. 

    I am a highly motivated and experienced professional with a strong background in the field.

    • I have a Bachelor's degree in Business Administration.

    • I have over 5 years of experience working as an Associate in a reputable company.

    • I am skilled in data analysis, project management, and client relations.

    • I have successfully led a team of 10 members to achieve project goals within tight deadlines.

    • I am a quick learner and adapt

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I guess someone's who's been rejected in a BPO with a reason of communication will clear this organisations interview
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Nothing serious if you went on ref all interview are scheduled on ref basis
  • Ans. They dont even ask your name if you went there on ref i have seen many peoples who write their name spelling wrong in CV still gets selected on ref basis, so make sure you have proper ref
  • Answered Anonymously
  • Q2. About your previous experiance
Round 3 - HR 

(1 Question)

  • Q1. Hr always ask about your self and offers 15 to 20% hike and try to convince you to settle for low by telling you brand value and told u they will give you increament after 6 month depends on your perform...
  • Ans. Make sure you get enough hike they never revise your sallery once you join.
  • Answered Anonymously
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Simple 20 question online test

Round 3 - One-on-one 

(1 Question)

  • Q1. Simple interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be affraid from interviewer's
Be confident
Answers the question afer analysing it properly
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. A short description about phnuemati system.
  • Ans. 

    Pneumatic systems use compressed air to transmit power for various applications.

    • Compressed air is stored in a tank and released through valves to actuate cylinders or motors.

    • Pneumatic systems are commonly used in industries for automation, such as in manufacturing processes.

    • Examples include pneumatic drills, robotic arms, and air brakes in vehicles.

  • Answered by AI
  • Q2. Types of sensor.
  • Ans. 

    Sensors are devices that detect and respond to physical input from the environment.

    • Temperature sensors - detect changes in temperature

    • Pressure sensors - measure pressure changes

    • Motion sensors - detect movement

    • Proximity sensors - detect nearby objects

    • Light sensors - measure light intensity

  • Answered by AI
  • Q3.  What is MTTR and MTBF
  • Ans. 

    MTTR stands for Mean Time To Repair, the average time taken to repair a failed component. MTBF stands for Mean Time Between Failures, the average time between failures of a component.

    • MTTR is the average time taken to repair a failed component.

    • MTBF is the average time between failures of a component.

    • MTTR = Total downtime / Number of failures

    • MTBF = Total uptime / Number of failures

  • Answered by AI
  • Q4. What is power factor how does it maintain.
  • Ans. 

    Power factor is a measure of how effectively electrical power is being used in a circuit.

    • Power factor is the ratio of real power to apparent power in an electrical system.

    • It is important for efficient power transmission and distribution.

    • Power factor is maintained by using power factor correction devices like capacitors.

    • A power factor of 1 indicates all power is being used effectively, while a lower power factor means s...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Phnuematic system
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Who are you? Why do this job you?

Round 2 - One-on-one 

(3 Questions)

  • Q1. What is transformers?
  • Ans. 

    Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease the voltage of an alternating current (AC) electrical supply.

    • They consist of two or more coils of wire, known as windings, which are wound around a core made of magnetic material.

    • The primary winding is connected to the input voltage source, whil...

  • Answered by AI
  • Q2. Type of transformers
  • Ans. 

    Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction.

    • There are various types of transformers, including power transformers, distribution transformers, autotransformers, and instrument transformers.

    • Power transformers are used to step up or step down voltage levels in power transmission and distribution systems.

    • Distribution transformers are use...

  • Answered by AI
  • Q3. What is relay? Andavantage of relay
  • Ans. 

    A relay is an electrically operated switch that uses an electromagnet to mechanically control the switching action.

    • Relays are used to control high power or high voltage circuits with a low power signal.

    • They can be used to switch on or off electrical devices remotely.

    • Relays provide electrical isolation between the control circuit and the circuit being controlled.

    • They are commonly used in automotive applications, industr...

  • Answered by AI

Skills evaluated in this interview

TDS Lithium-Ion Battery Interview FAQs

How many rounds are there in TDS Lithium-Ion Battery Tool Room Engineer interview?
TDS Lithium-Ion Battery interview process usually has 2 rounds. The most common rounds in the TDS Lithium-Ion Battery interview process are Technical and One-on-one Round.
What are the top questions asked in TDS Lithium-Ion Battery Tool Room Engineer interview?

Some of the top questions asked at the TDS Lithium-Ion Battery Tool Room Engineer interview -

  1. What is grinding machine and what are the basic functions available in grinding...read more
  2. What is the difference between blanking, piercing, drawi...read more
  3. Difference between milling machine and turning machi...read more

Tell us how to improve this page.

TDS Lithium-Ion Battery Tool Room Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Okaya Power Interview Questions
3.7
 • 32 Interviews
Mettler-Toledo Interview Questions
3.6
 • 23 Interviews
BCH Electric Interview Questions
4.1
 • 22 Interviews
GM Modular Interview Questions
3.8
 • 18 Interviews
OVT India Interview Questions
3.7
 • 13 Interviews
Tbea Energy Interview Questions
3.9
 • 12 Interviews
View all
TDS Lithium-Ion Battery Tool Room Engineer Salary
based on 4 salaries
₹6.3 L/yr - ₹8 L/yr
93% more than the average Tool Room Engineer Salary in India
View more details
Diploma Trainee Engineer
319 salaries
unlock blur

₹3 L/yr - ₹4 L/yr

Assistant Engineer
166 salaries
unlock blur

₹3.6 L/yr - ₹5.5 L/yr

Engineer
89 salaries
unlock blur

₹4 L/yr - ₹8 L/yr

Assistant Manager
68 salaries
unlock blur

₹7.9 L/yr - ₹15.7 L/yr

Senior Engineer
62 salaries
unlock blur

₹6.7 L/yr - ₹11.5 L/yr

Explore more salaries
Compare TDS Lithium-Ion Battery with

Okaya Power

3.7
Compare

GM Modular

3.8
Compare

Mettler-Toledo

3.6
Compare

Elecon Engineering

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview