What are the types of defects as per QM pillar of TPM and how do we eliminate them

Question

Accepted Answer

There are 3 types of defects as per QM pillar of TPM: Equipment, Process, and Human. We eliminate them through continuous improvement.

Equipment defects are caused by malfunctioning or poorly maintained equipment. We can eliminate them by implementing preventive maintenance and conducting regular inspections.
Process defects are caused by errors in the production process. We can eliminate them by identifying the root cause of the problem and implementing corrective actions.
Human defects are caused by errors made by operators or other personnel. We can eliminate them by providing training and education to improve skills and knowledge.
Continuous improvement is key to eliminating defects and improving overall quality. This involves setting goals, measuring performance, and making ongoing improvements.
Examples of defect elimination techniques include Six Sigma, Lean Manufacturing, and Total Quality Management.

Accepted Answer

Gears are mechanical components used to transmit motion and power between rotating shafts. Several parameters are measured in gears to ensure their proper functioning and performance. Here are some common measurements and how they are typically measured:

1. **Pitch Diameter:** 
   - The diameter of the pitch circle of a gear, where the tooth size is defined. It's usually measured using a micrometer or caliper, or more precisely, with specialized gear measuring instruments like a gear tooth caliper or a gear measuring machine.

2. **Gear Tooth Dimensions:**
   - Parameters such as tooth width, tooth thickness, tooth depth, and tooth profile are crucial for gear meshing and load distribution. These dimensions can be measured using gear measuring machines, gear profile projectors, or coordinate measuring machines (CMMs).

3. **Backlash:**
   - The amount of clearance between mating gears. It's measured by positioning the gears in mesh and using a dial indicator to measure the movement of one gear relative to the other when the direction of rotation is reversed.

4. **Runout:**
   - The deviation of the gear's rotational axis from its intended path. Runout is typically measured using a dial indicator placed against the gear's tooth surface while it rotates.

5. **Gear Tooth Profile:**
   - The shape of the gear tooth profile, including involute profile deviations and tooth-to-tooth variations, is critical for smooth meshing and minimal noise. It's measured using specialized gear measuring instruments like gear profile testers or gear measuring machines.

6. **Surface Finish:**
   - The quality of the gear tooth surface is crucial for minimizing friction, wear, and noise. Surface finish is measured using surface roughness testers, which provide quantitative data on the roughness average (Ra) or other parameters.

7. **Gear Hardness:**
   - The hardness of gear materials affects their wear resistance and durability. Hardness is typically measured using a hardness tester, such as a Rockwell or Brinell hardness tester, on the gear's surface or core.

8. **Gear Alignment:**
   - The proper alignment of gears ensures smooth operation and minimizes wear. Gear alignment is typically checked using alignment tools, optical alignment instruments, or laser alignment systems.

These measurements are essential for ensuring the quality, reliability, and performance of gears in various mechanical systems, including automotive transmissions, industrial machinery, and gearboxes.

Accepted Answer

Calibrating a vernier caliper involves ensuring its accuracy by comparing its measurements against a standard reference. Here's a general procedure for calibrating a vernier caliper:

1. **Select a Reference Standard:**
   - Choose a calibrated master gauge block or a calibrated measurement standard with a known dimension that closely matches the measurement range of the vernier caliper.

2. **Clean the instrument :**
   - Ensure that the vernier caliper is clean and free from any dirt or debris that could affect its accuracy.

3. **Zero Calibration:**
   - Close the jaws of the vernier caliper and ensure that the zero mark on the vernier scale aligns perfectly with the zero mark on the main scale. If necessary, adjust the zero point using the zero adjustment screw or knob.

4. **Measure the Reference Standard:**
   - Place the reference standard between the jaws of the vernier caliper and gently close them to make contact with the standard.
   - Read the measurement indicated by the vernier scale and the main scale.

5. **Compare Measurements:**
   - Compare the measured value displayed on the vernier caliper with the known dimension of the reference standard.
   - If there is a significant discrepancy between the measured value and the known dimension, adjustments may be required.

6. **Adjustment (if necessary):**
   - If the measured value deviates from the known dimension, adjust the vernier caliper as per the manufacturer's instructions. This may involve tightening or loosening screws or knobs to correct any errors.

7. **Repeat Calibration (if necessary):**
   - After making adjustments, repeat the calibration process to verify the accuracy of the vernier caliper.
   - Continue adjusting and re-calibrating until the measured values closely match the known dimensions of the reference standard within an acceptable tolerance.

8. **Record Results:**
   - Record the calibration results, including any adjustments made, in a calibration log or documentation for future reference.

9. **Routine Maintenance:**
   - Regularly inspect and maintain the vernier caliper to ensure its continued accuracy and reliability.
   - Keep the caliper clean, lubricated, and stored properly when not in use.

By following these steps, you can effectively calibrate a vernier caliper and ensure its accuracy for precise measurements.

Accepted Answer

Total Productive Maintenance (TPM) is a comprehensive approach to equipment maintenance aimed at maximizing productivity, efficiency, and overall equipment effectiveness. Here are the stages and steps involved in TPM analysis:

1. **Preparation:**
   - Establish a cross-functional TPM team consisting of operators, maintenance personnel, engineers, and management.
   - Define objectives and goals for implementing TPM.
   - Conduct training sessions to educate employees about TPM principles and methodologies.

2. **Initial Assessment:**
   - Assess the current state of equipment reliability, maintenance practices, and overall operational efficiency.
   - Identify key performance indicators (KPIs) such as Overall Equipment Effectiveness (OEE), mean time between failures (MTBF), and mean time to repair (MTTR).
   - Analyze historical data to identify recurring issues and areas for improvement.

3. **Autonomous Maintenance (Jishu Hozen):**
   - Empower operators to take ownership of their equipment through daily cleaning, inspection, and minor maintenance tasks.
   - Provide training to operators on equipment care, lubrication, and basic troubleshooting techniques.
   - Implement visual management tools such as cleaning schedules, checklists, and standardized work procedures.

4. **Planned Maintenance (PM):**
   - Develop a preventive maintenance program based on equipment condition, performance, and manufacturer recommendations.
   - Establish maintenance schedules for routine inspections, lubrication, and component replacements.
   - Utilize predictive maintenance techniques such as vibration analysis, thermography, and oil analysis to anticipate equipment failures.

5. **Focused Improvement (Kaizen):**
   - Identify and prioritize improvement opportunities to address chronic equipment issues and performance gaps.
   - Implement small-scale improvement projects using cross-functional teams and continuous improvement methodologies.
   - Monitor and measure the impact of improvements on equipment reliability, productivity, and cost savings.

6. **Training and Skills Development:**
   - Provide ongoing training and skills development for employees involved in TPM activities.
   - Offer technical training on equipment operation, maintenance practices, and problem-solving techniques.
   - Encourage knowledge sharing and cross-training to build a skilled and capable workforce.

7. **Quality Maintenance:**
   - Implement measures to prevent defects and ensure product quality throughout the production process.
   - Integrate quality checkpoints and inspections into equipment maintenance activities.
   - Utilize Total Quality Management (TQM) principles to continuously improve product quality and customer satisfaction.

8. **Safety, Health, and Environment (SHE) Management:**
   - Promote a culture of safety and environmental responsibility within the organization.
   - Implement safety protocols, risk assessments, and emergency response procedures.
   - Comply with regulatory requirements and industry standards related to workplace safety and environmental protection.

By following these stages and steps, organizations can effectively implement TPM principles and achieve sustainable improvements in equipment reliability, productivity, and overall business performance.

What are the types of defects as per QM pillar of TPM and how do we eliminate them

Top Suzuki Assistant Manager Supplier Quality Assurance interview questions & answers

Top HR questions asked in Suzuki Assistant Manager Supplier Quality Assurance