AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sunbeam Auto Quality Inspector Interview Questions, Process, and Tips for Experienced
Top Sunbeam Auto Quality Inspector Interview Questions and Answers for Experienced
- Q1. What is the capital of Afghanistan?
- Q2. How much is 1 micron?
- Q3. What is Transformers?
Sunbeam Auto Quality Inspector Interview Experiences for Experienced
2 interviews found
Selected
I applied via Approached by Company and was interviewed in Oct 2023. There was 1 interview round.
(5 Questions)
- Q1. Types of engine ?
- Ans.
Types of engines include internal combustion engines, steam engines, and electric engines.
Internal combustion engines: used in cars, motorcycles, and airplanes
Steam engines: used in trains and ships
Electric engines: used in electric vehicles and some hybrid vehicles
- Q2. What is Transformers?
- Ans.
Transformers are electrical devices that transfer energy between two or more circuits through electromagnetic induction.
Transformers consist of primary and secondary coils wound around a core
They are used to step up or step down voltage levels in electrical systems
Examples include power transformers used in electrical substations and distribution transformers on utility poles
- Q3. CNC &VMC Full form ?
- Ans.
CNC stands for Computer Numerical Control and VMC stands for Vertical Machining Center.
CNC is a manufacturing process where pre-programmed computer software dictates the movement of factory tools and machinery.
VMC is a type of CNC machine that operates in a vertical orientation.
Examples: CNC milling machines, CNC lathes, VMCs like Haas VF-2, Mazak VCN-530C.
- Q4. Last semester Subject name?
- Q5. Why did you leave your old company?
Skills evaluated in this interview
I applied via Campus Placement and was interviewed before Jan 2021. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. What is the capital of Afghanistan?
- Ans.
The capital of Afghanistan is Kabul.
Kabul is located in the eastern part of Afghanistan.
It has a population of over 4 million people.
Kabul has a rich history and has been the capital of Afghanistan since 1776.
- Q2. How much is 1 micron?
- Ans.
1 micron is a unit of measurement equal to one millionth of a meter.
1 micron is also known as a micrometer
It is commonly used to measure the size of particles in air or water
Human hair is typically between 50 and 100 microns in diameter
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Quality Inspector Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Anonymous
posted on 3 Aug 2021
Interview Questionnaire
1 Question
- Q1. Introduction
I applied via Company Website and was interviewed in Oct 2021. There were 4 interview rounds.
Interview Preparation Tips
Quality Inspector Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Anonymous
posted on 3 Apr 2024
Selected
I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.
(2 Questions)
- Q1. 5 s Quality control poka yoka
- Q2. 7 qc tools ppm
Quality inspector fainal lain part cheking
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in May 2023. There were 2 interview rounds.
Quality management and customer delight
Mechanical all measurements instrument
Interview Preparation Tips
Quality Inspector Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Anonymous
posted on 20 Apr 2021
I appeared for an interview in Mar 2021.
Interview Questionnaire
7 Questions
- Q1. What is control chart???
- Ans.
A control chart is a statistical tool used to monitor and control a process over time.
It helps to identify and analyze variations in a process.
It consists of a central line representing the average value and upper and lower control limits.
Data points falling outside the control limits indicate special causes of variation.
Common types of control charts include X-bar and R charts, X-bar and S charts, and p charts.
Control...
- Q2. How you give setup approval during set-up change?
- Q3. Principal of vernier caliper?
- Ans.
The principle of vernier caliper is based on the concept of vernier scale and the ability to measure small distances accurately.
Vernier caliper is a measuring instrument used to measure the dimensions of an object with high precision.
It consists of a main scale and a sliding vernier scale, which allows for more accurate measurements.
The principle behind vernier caliper is that the vernier scale has a smaller division t...
- Q4. Your last job profile and responsibilities.
- Q5. Why we should hire you?
- Q6. What are the no. Of angle of projection in drawing?
- Ans.
The number of angles of projection in a drawing depends on the specific requirements and complexity of the object being depicted.
The number of angles of projection can vary depending on the purpose of the drawing.
Common angles of projection include front view, top view, side view, and isometric view.
Additional angles may be required for complex objects or to show specific details.
The number of angles can also depend on...
- Q7. In which angle of projection drawing should be prepared?
- Ans.
The angle of projection drawing should be prepared in the third angle projection.
The third angle projection is commonly used in engineering and technical drawings.
In third angle projection, the object is placed in the third quadrant of the orthographic projection.
The top view is placed above the front view, and the right side view is placed to the right of the front view.
This method is widely adopted in many countries ...
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. What is your qualifications
I appeared for an interview in Feb 2022.
(4 Questions)
- Q1. What are your salary expectations?
- Ans.
I am open to discussing salary based on the responsibilities and expectations of the role.
I am flexible and willing to negotiate based on the specific job requirements.
I am looking for fair compensation for my skills and experience.
I am open to discussing benefits and other forms of compensation.
I am interested in opportunities for growth and advancement within the company.
- Q2. Share details of your previous job.
- Ans.
I worked as a Quality Inspector at XYZ Company.
Conducted inspections on incoming materials, in-process products, and finished goods
Ensured compliance with industry standards and company policies
Identified and documented non-conformances and worked with production team to resolve issues
Maintained inspection records and generated reports for management
Collaborated with cross-functional teams to improve quality processes
- Q3. Why should we hire you?
- Ans.
I have the necessary skills, experience, and attention to detail to ensure quality standards are met consistently.
I have experience in quality inspection and have a keen eye for detail.
I am knowledgeable in industry standards and regulations.
I am a quick learner and can adapt to new processes and procedures easily.
I am a team player and can work collaboratively with others to achieve common goals.
I am committed to ensu...
- Q4. Tell me about yourself.
- Ans.
I am a detail-oriented individual with experience in quality inspection and a passion for ensuring products meet high standards.
I have worked as a quality inspector for 3 years
I am familiar with ISO 9001 standards
I have experience using measuring tools such as calipers and micrometers
I am skilled in identifying defects and implementing corrective actions
I am a team player and enjoy collaborating with others to achieve
Interview Preparation Tips
I applied via Company Website and was interviewed in Feb 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What are your salary expectations?
- Q2. Tell me about yourself.
Interview Preparation Tips
- Diploma
- Quality Inspection
Mob no : XXXXX
Experience : 1year
Worked in : Indo-Mim Pvt Ltd Hoskote Banglore
Sunbeam Auto Interview FAQs
Tell us how to improve this page.
Sunbeam Auto Interviews By Designations
- Sunbeam Auto DET Interview Questions
- Sunbeam Auto Quality Inspector Interview Questions
- Sunbeam Auto Assistant Engineer Interview Questions
- Sunbeam Auto Diploma Trainee Engineer Interview Questions
- Sunbeam Auto Quality Engineer Interview Questions
- Sunbeam Auto DET Trainee Interview Questions
- Sunbeam Auto Senior Engineer Interview Questions
- Sunbeam Auto Customer Service Associate Interview Questions
- Show more
Interview Questions for Popular Designations
- QC Inspector Interview Questions
- QA QC Inspector Interview Questions
- Quality Control Inspector Interview Questions
- Quality Line Inspector Interview Questions
- Inspection Engineer Interview Questions
- Quality Assurance Inspector Interview Questions
- Third Party Inspector Interview Questions
- Senior Quality Inspector Interview Questions
- Show more
Sunbeam Auto Quality Inspector Interview Process for Experienced
based on 1 interview
Interview experience
Quality Inspector Interview Questions from Similar Companies
Fast track your campus placements
Sunbeam Auto Quality Inspector Reviews and Ratings
based on 21 reviews
Rating in categories
|
Assistant Engineer
170
salaries
|  ₹2.4 L/yr - ₹5.1 L/yr |
|
Senior Engineer
152
salaries
| ₹3.5 L/yr - ₹7.8 L/yr |
|
Engineer
151
salaries
| ₹2.3 L/yr - ₹7 L/yr |
|
Assistant Manager
130
salaries
| ₹4.9 L/yr - ₹10 L/yr |
|
Quality Engineer
124
salaries
| ₹1.5 L/yr - ₹5.1 L/yr |
Delphi TVS
Motherson Automotive Technologies and Engineering
Belrise Industries
Krishna Maruti
- Home >
- Interviews >
- Sunbeam Auto Interview Questions >
- Sunbeam Auto Quality Inspector Interview Questions for Experienced
