Premium Employer

i

This company page is being actively managed by Sidel Team. If you also belong to the team, you can get access from here

Sidel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Sidel Graduate Engineer Interview Questions and Answers

Updated 2 Mar 2024

Sidel Graduate Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Feb 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Includes 60 questions more focus on technical questions

Round 2 - Technical 

(4 Questions)

  • Q1. GDNT symbols description
  • Ans. 

    GD&T symbols are used in engineering drawings to specify the geometric characteristics of a part.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • Symbols include perpendicularity, concentricity, flatness, etc.

    • Used to communicate design requirements accurately

    • Ensures parts are manufactured to the correct dimensions and tolerances

  • Answered by AI
  • Q2. Manufacturing processes
  • Q3. Resume based question
  • Q4. Questions on Internship
Round 3 - One-on-one 

(3 Questions)

  • Q1. Personal information
  • Q2. Future plans and education plans
  • Q3. Family background

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General discussion of your work history
Round 3 - Technical 

(1 Question)

  • Q1. Stream technical question
Round 4 - Assignment 

General work related assignment

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare of your work related technical question.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is QA and QC
  • Ans. 

    QA stands for Quality Assurance and involves processes to prevent defects, while QC stands for Quality Control and involves processes to identify defects.

    • QA focuses on preventing defects in the product or service being delivered

    • QC focuses on identifying defects in the product or service being delivered

    • QA involves processes such as reviews, audits, and process improvements

    • QC involves processes such as testing, inspectio...

  • Answered by AI
  • Q2. Welding details

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Preparations only , not to try extra

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC

I applied via Referral and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basics and resume prepare

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for resume and basics. Dc dc converter.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Solving questions paper

Round 2 - Assignment 

CAD &Solid work test

Round 3 - HR 

(2 Questions)

  • Q1. Project Handling experience
  • Q2. Salary negotiation

Interview Questionnaire 

5 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a Service Engineer with expertise in troubleshooting and repairing complex machinery.

    • Experienced in diagnosing and resolving technical issues in industrial equipment

    • Proficient in using diagnostic tools and software to identify problems

    • Skilled in performing maintenance and repairs on various types of machinery

    • Strong problem-solving and communication skills

    • Ability to work independently and under pressure

    • Example: Suc...

  • Answered by AI
  • Q2. Why hydraulics Ram has different speed in head side and rod Side?
  • Ans. 

    The speed difference in a hydraulic ram is due to the difference in effective areas on the head side and rod side.

    • The head side of the ram has a larger effective area, resulting in slower speed.

    • The rod side of the ram has a smaller effective area, resulting in faster speed.

    • This speed difference is a result of the hydraulic pressure acting on different areas.

    • The speed ratio between the head side and rod side can be calc...

  • Answered by AI
  • Q3. What is the purpose of pressure relief valve?
  • Ans. 

    A pressure relief valve is used to protect equipment and systems from excessive pressure by releasing the pressure when it exceeds a certain limit.

    • Prevents damage to equipment and systems

    • Ensures safety of personnel

    • Maintains system integrity

    • Prevents explosions or ruptures

    • Relieves excess pressure by opening and releasing fluid or gas

    • Commonly used in boilers, pressure vessels, pipelines, and hydraulic systems

  • Answered by AI
  • Q4. What is orifice?
  • Ans. 

    An orifice is a small opening or hole through which fluid or gas can flow.

    • Orifices are commonly used in various industries, such as plumbing, engineering, and manufacturing.

    • They are often used to control the flow rate of fluids or gases.

    • Orifices can be found in devices like nozzles, valves, and flow meters.

    • The size of an orifice determines the flow rate and pressure drop across it.

    • Examples of orifices include the tiny ...

  • Answered by AI
  • Q5. Why you looking for a job change?
  • Ans. 

    I am looking for a job change to explore new opportunities and challenges.

    • Seeking career growth and advancement

    • Wanting to work in a different industry or with different technologies

    • Desire for a better work-life balance

    • Relocation or proximity to family

    • Unsatisfactory current job situation

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just give your introduction very simple short and sweet it's not to be so lengthy.
And the technical round is very simple as always. It consists of mainly Basics.
So don't worry...!!

Best of Luck...!!

I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Explain about open loop & close loop operation in hydraulic system.
  • Ans. 

    Open loop and closed loop are two modes of operation in hydraulic systems.

    • Open loop operation: The hydraulic system operates without feedback control. The output is not adjusted based on the system's performance.

    • Closed loop operation: The hydraulic system uses feedback control to adjust the output based on the system's performance.

    • Open loop systems are simpler and less expensive, but they lack precision and accuracy.

    • Cl...

  • Answered by AI
  • Q2. Explain about Starting circuit.
  • Ans. 

    The starting circuit is responsible for initiating the engine's operation.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.

    • The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion process.

    • Once...

  • Answered by AI
  • Q3. Why should we hire you ?
  • Ans. 

    I am a highly skilled and experienced service engineer with a proven track record of successfully troubleshooting and resolving complex technical issues.

    • I have a strong technical background and extensive experience in diagnosing and repairing equipment.

    • I am a quick learner and can adapt to new technologies and processes easily.

    • I have excellent communication skills and can effectively communicate with customers and team...

  • Answered by AI
  • Q4. What is your core values ?
  • Ans. 

    My core values include integrity, accountability, and continuous learning.

    • Integrity: I believe in always doing the right thing, even when no one is watching.

    • Accountability: I take ownership of my actions and responsibilities.

    • Continuous learning: I strive to constantly improve my skills and knowledge.

    • Example: I once discovered a mistake in a project I was working on, and instead of ignoring it, I took responsibility and...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Questions based upon technical knowledge like engine, basic electrical & basic hydraulics.

General Tips: You should have deep knowledge about hydraulics system & DC electrics.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-3 Months
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Draw a basic Hydraulic circuit and expain ?
  • Ans. 

    A hydraulic circuit is a system that uses pressurized fluid to transmit power.

    • A hydraulic pump is used to create pressure in the fluid.

    • Valves control the flow of fluid through the circuit.

    • Actuators, such as cylinders or motors, convert the fluid pressure into mechanical force.

    • A reservoir stores the fluid and a filter removes contaminants.

    • Examples include excavators, cranes, and hydraulic presses.

  • Answered by AI
  • Q2. What is tappet setting required in engines ?
  • Ans. 

    Tappet setting is the process of adjusting the clearance between the tappet and the valve stem in an engine.

    • Tappet setting ensures proper valve timing and prevents engine damage.

    • It involves adjusting the clearance between the tappet and the valve stem using a feeler gauge.

    • The correct tappet setting varies depending on the engine model and manufacturer.

    • Incorrect tappet setting can cause engine noise, poor performance, a...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Study technical like electrical and hydraulics thorughly
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. I am doing engine overhualing transmission and hydraulic component inspection and overhauling
  • Q2. I am doing Hydraulic Complaint and pump dismantle and reassemble

Interview Preparation Tips

Interview preparation tips for other job seekers - 3Years experience

Sidel Interview FAQs

How many rounds are there in Sidel Graduate Engineer interview?
Sidel interview process usually has 3 rounds. The most common rounds in the Sidel interview process are Aptitude Test, Technical and One-on-one Round.
How to prepare for Sidel Graduate Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sidel. The most common topics and skills that interviewers at Sidel expect are Analytical, CAD, Electrical Engineering, MS Office Package and Mechanical Engineering.
What are the top questions asked in Sidel Graduate Engineer interview?

Some of the top questions asked at the Sidel Graduate Engineer interview -

  1. GDNT symbols descript...read more
  2. Future plans and education pl...read more
  3. Manufacturing proces...read more

Tell us how to improve this page.

Sidel Graduate Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Join Sidel Creating a world where packaging is safe for Humans and Environment

Interview Questions from Similar Companies

Toshiba Interview Questions
4.0
 • 28 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
Liebherr Interview Questions
3.9
 • 17 Interviews
GEA Group Interview Questions
3.9
 • 10 Interviews
View all
Sidel Graduate Engineer Salary
based on 4 salaries
₹4.5 L/yr - ₹5.7 L/yr
6% more than the average Graduate Engineer Salary in India
View more details
Design Engineer
55 salaries
unlock blur

₹4.8 L/yr - ₹12.5 L/yr

Mechanical Engg. Design
39 salaries
unlock blur

₹4.3 L/yr - ₹10.5 L/yr

Field Service Engineer
32 salaries
unlock blur

₹5 L/yr - ₹12 L/yr

Automation Engineer
14 salaries
unlock blur

₹5.5 L/yr - ₹16 L/yr

Electrical Design Engineer
13 salaries
unlock blur

₹6.2 L/yr - ₹13.5 L/yr

Explore more salaries
Compare Sidel with

Trelleborg

3.9
Compare

Toshiba

4.0
Compare

Bosch Power Tools

4.4
Compare

Mitsubishi Heavy Industries

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview