AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sankei Giken Quality Group Lead Interview Questions and Answers for Experienced
Sankei Giken Quality Group Lead Interview Experiences for Experienced
1 interview found
Selected
I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.
(5 Questions)
- Q1. Red bin analysis
- Q2. Engineering drawing
- Q3. Welding penetration
- Q4. Chemical used for penetration
- Ans.
Chemical used for penetration is typically a surfactant or wetting agent.
Surfactants reduce surface tension and allow liquids to spread more easily.
Examples include detergents, soaps, and emulsifiers.
Wetting agents help liquids penetrate surfaces more effectively.
- Q5. Weld bead offset reason
- Ans.
Weld bead offset can be caused by various factors such as incorrect welding parameters, poor fit-up, or improper torch angle.
Incorrect welding parameters such as voltage, current, or travel speed
Poor fit-up of the parts being welded
Improper torch angle leading to uneven deposition of weld metal
Inadequate cleaning of the base metal before welding
Lack of operator skill or experience
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Interview Questionnaire
2 Questions
- Q1. How make resume how to mantion necessary information. And how to introduce myself.
- Q2. What point mation resume to make perfect resume
Interview Questionnaire
8 Questions
- Q1. Tell me about yourself?
- Q2. Why did you leave your previous job?
- Q3. How much salary you were getting at your previous job?
- Q4. Can you handle Vernier, micrometer?
- Ans.
Yes, I have experience handling Vernier and micrometer.
I have used Vernier and micrometer in my previous job as a quality inspector.
I am familiar with the proper use and calibration of these tools.
I understand the importance of accurate measurements in ensuring product quality.
I am willing to undergo additional training if necessary.
- Q5. What is least count of micrometer?
- Ans.
The least count of a micrometer is the smallest measurement that can be read on the scale.
The least count of a micrometer is typically 0.01 mm or 0.001 mm.
It depends on the type of micrometer being used.
For example, an outside micrometer typically has a least count of 0.01 mm, while an inside micrometer may have a least count of 0.001 mm.
The least count is important for accurately measuring small distances or dimension
- Q6. Why do you want to work in our company?
- Q7. Bearing function,types?
- Q8. Salary expectation?
Interview Preparation Tips
1) For an interview go with free mind, don't keep any question in mind that,what will happen.it will help you to ease your interview.
2) Be prepare, before going to an interview. Prepare with your technical knowledge, about your previous experience and keep information about company where you are going for an interview.
3)and last but not least, Is that, while interview be confident,be calm and be positive. Thank you!
Selected
I applied via Walk-in and was interviewed in May 2022. There were 2 interview rounds.
(2 Questions)
- Q1. 1)Vernier caliper and Micrometer Least Count and it's Use 2)What is Root cause Analysis 3) Describe Iron Carbon Diagram 4) What is GD&T And it's Symbol 5) difference between First angle Method and Third an...
- Ans.
Answers to questions related to quality engineering concepts such as Vernier caliper, Micrometer, Root cause analysis, Iron Carbon Diagram, GD&T, and First angle vs Third angle method.
Vernier caliper least count is 0.02 mm, used for measuring external and internal dimensions accurately.
Micrometer least count is 0.01 mm, used for precise measurements of small dimensions.
Root cause analysis is a method used to identify t...
- Q2. 6) What is Quality? 7) Difference between QA &QC 8) What is 5S 9) What is CAPA
- Ans.
Quality is the degree of excellence of a product or service as perceived by the customer.
Quality is meeting or exceeding customer expectations and requirements.
It involves ensuring that products or services are free from defects and meet established standards.
Quality is a continuous process of improvement and prevention of defects.
It includes aspects such as reliability, durability, performance, and customer satisfacti...
I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.
(2 Questions)
- Q1. Tell me about your experience
- Q2. Salary requirements , where you heard about this company
Interview Preparation Tips
- Manufacturing Engineering
I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Current working profile
- Q2. And all of your CV
Interview Preparation Tips
(1 Question)
- Q1. Educational details and other persional details
(1 Question)
- Q1. Power supply designing and instrument details
Selected
I applied via Approached by Company and was interviewed before Dec 2023. There was 1 interview round.
(5 Questions)
- Q1. Tell me About yourself?
- Q2. Knowledge of read the drawing?
- Q3. Reason of leaving previous company
- Q4. What is Previous company salary.
- Q5. What is your expected salary?
Interview Preparation Tips
Junior Engineer Interview Questions & Answers
Jtekt Sona Automotive India
Anonymous
posted on 4 Dec 2023
Selected
I applied via Approached by Company and was interviewed before Dec 2022. There were 3 interview rounds.
Practice is the most advocated rool of aptitude test
Assignment is compusry solve all problems
Interview Preparation Tips
Quality Engineer Interview Questions & Answers
Caparo Engineering India
Bikhyat Singh
posted on 5 Aug 2024
(1 Question)
- Q1. What are the responsibilities of a quality engineer?
- Ans.
Quality engineers are responsible for ensuring products meet quality standards through testing, analysis, and process improvement.
Developing and implementing quality control systems
Conducting tests and inspections to identify defects
Analyzing data to improve processes and reduce defects
Collaborating with production teams to address quality issues
Training staff on quality standards and procedures
Interview Preparation Tips
Sankei Giken Interview FAQs
Tell us how to improve this page.
Sankei Giken Interviews By Designations
- Sankei Giken Production Engineer Interview Questions
- Sankei Giken Head/VP/GM-Production Interview Questions
- Sankei Giken Assistant Engineer Interview Questions
- Sankei Giken Engineer Interview Questions
- Sankei Giken Senior Engineer Interview Questions
- Sankei Giken Quality Assurance Interview Questions
- Sankei Giken Quality Group Lead Interview Questions
- Sankei Giken Supervisor Interview Questions
- Show more
Interview Questions for Popular Designations
- Group Leader Interview Questions
- Group Manager Interview Questions
- Airport Ground Staff Interview Questions
- Group Product Manager Interview Questions
- Ground Staff Interview Questions
- Group General Manager Interview Questions
- Senior Group Manager Interview Questions
- Group Relationship Officer Interview Questions
- Show more
Sankei Giken Quality Group Lead Interview Process for Experienced
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Sankei Giken Quality Group Lead Reviews and Ratings
based on 1 review
Rating in categories
|
Junior Engineer
38
salaries
|  ₹1.9 L/yr - ₹3.4 L/yr |
|
Engineer
33
salaries
| ₹2.4 L/yr - ₹5.3 L/yr |
|
Senior Engineer
26
salaries
| ₹4 L/yr - ₹8.5 L/yr |
|
Production Engineer
20
salaries
| ₹2.4 L/yr - ₹4.5 L/yr |
|
Assistant Engineer
18
salaries
| ₹2.5 L/yr - ₹3.8 L/yr |
Caparo Engineering India
Marelli
Jtekt Sona Automotive India
Sata Vikas India
- Home >
- Interviews >
- Sankei Giken Interview Questions >
- Sankei Giken Quality Group Lead Interview Questions for Experienced
