Filter interviews by
I applied via Recruitment Consulltant and was interviewed before Dec 2023. There were 2 interview rounds.
The value of pi and its applications.
Gears are classified based on their shape, size, and arrangement. Common types include spur, helical, bevel, worm, and rack gears.
Spur gears: most common type, teeth are straight and parallel to the gear axis
Helical gears: teeth are angled in a helix around the gear axis, providing smoother and quieter operation
Bevel gears: used to transmit motion between intersecting shafts, teeth are conically shaped
Worm gears: consi...
I applied via Recruitment Consulltant and was interviewed in Sep 2022. There were 4 interview rounds.
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
I applied via Walk-in and was interviewed before Oct 2021. There were 3 interview rounds.
Its all about the overview of marketing
posted on 6 Mar 2020
Mcb stands for Miniature Circuit Breaker and MCCB stands for Molded Case Circuit Breaker.
Mcb is a type of circuit breaker that is used for low voltage applications.
MCCB is a type of circuit breaker that is used for high voltage applications.
Both Mcb and MCCB are used to protect electrical circuits from overloads and short circuits.
Mcb is usually rated for currents up to 100 amps, while MCCB can handle currents up to 25...
Current and voltage are two fundamental concepts in electricity. Current is the flow of electric charge, while voltage is the potential difference that drives the flow.
Current is the rate of flow of electric charge, measured in amperes (A).
Voltage is the force or pressure that pushes the electric charge to flow, measured in volts (V).
Current flows through a conductor, while voltage exists across a conductor.
Current is ...
A unit is a standard measurement used to quantify physical quantities. Current is measured in amperes (A) and voltage is measured in volts (V).
A unit is a fixed quantity used as a standard of measurement.
Current is the flow of electric charge in a circuit and is measured in amperes (A).
Voltage is the electric potential difference between two points in a circuit and is measured in volts (V).
The unit of current, ampere, ...
There are several types of transformers used in electrical systems.
Power Transformers
Distribution Transformers
Instrument Transformers
Auto Transformers
Isolation Transformers
Step-up and Step-down Transformers
Three-phase Transformers
Single-phase Transformers
D.OL starter is a type of motor starter used to start and stop three-phase motors.
D.OL stands for Direct-On-Line.
It is the simplest and most common type of motor starter.
It directly connects the motor to the power supply, providing full voltage to the motor.
It is suitable for small to medium-sized motors.
It does not provide any protection against overloading or short circuits.
It is commonly used in applications such as
An ampere (amp) is the unit of electric current in the International System of Units (SI).
Amperes measure the rate of flow of electric charge.
It is named after the French physicist André-Marie Ampère.
One ampere is defined as one coulomb of charge passing through a point in one second.
Amperes are used to measure the current flowing through electrical circuits.
Common household appliances like light bulbs and refrigerator...
I applied via Newspaper Ad and was interviewed in Jul 2022. There were 3 interview rounds.
Electrical maintenance work
Experience in 5year
Complast sunmar
I applied via Approached by Company and was interviewed in Jan 2023. There were 2 interview rounds.
There are various types of gearboxes used in maintenance fitting, including spur gearboxes, helical gearboxes, bevel gearboxes, and worm gearboxes.
Spur gearboxes have straight teeth and are commonly used in applications with low to moderate speeds and loads.
Helical gearboxes have angled teeth and provide smoother and quieter operation compared to spur gearboxes.
Bevel gearboxes are used to transmit power between shafts ...
Pitch is the distance between two adjacent threads in a screw or bolt.
Pitch is measured in millimeters or inches.
It determines the tightness of the screw or bolt.
Different types of pitch include coarse, fine, and extra fine.
Pitch is important in alignment as it affects the positioning of rotating machinery.
Misaligned pitch can cause vibration, noise, and premature wear and tear.
Misalignment is when two or more parts are not properly aligned. Backless refers to a type of shoe without a back.
Misalignment can cause wear and tear on machinery and decrease efficiency.
Examples of misalignment include a crooked belt on a conveyor or a misaligned shaft in a motor.
Backless shoes are typically sandals or slip-ons that do not have a heel or back portion.
Backless shoes can be more comfortable in hot weat
I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.
Electricity is the flow of electrons through a conductor.
Electricity is a form of energy that powers most of our modern devices.
It is created by the movement of electrons from one atom to another.
Electricity can be generated from various sources such as coal, wind, solar, and hydro power.
It can be dangerous if not handled properly and can cause electric shock or fire.
Electricity is measured in units of volts, amps, and
posted on 12 Feb 2022
I applied via Campus Placement
based on 2 interviews
Interview experience
based on 1 review
Rating in categories
Senior Scientist
33
salaries
| ₹17 L/yr - ₹42.5 L/yr |
Lead Scientist
24
salaries
| ₹30 L/yr - ₹55 L/yr |
Scientist
23
salaries
| ₹14 L/yr - ₹30 L/yr |
Senior Associate
22
salaries
| ₹3.8 L/yr - ₹8.5 L/yr |
Team Member Manufacturing
21
salaries
| ₹3.2 L/yr - ₹9.5 L/yr |
Asian Paints
Berger Paints
Kansai Nerolac Paints
AkzoNobel