Filter interviews by
The hole size for an M8 bolt is typically 8.5mm to 9mm.
The hole size for an M8 bolt is determined by the bolt's nominal diameter.
The recommended hole size for an M8 bolt is usually 8.5mm to 9mm.
The hole should be slightly larger than the bolt's diameter to allow for easy insertion and proper fit.
Using a drill bit or a hole saw of the appropriate size is essential for creating the correct hole size for an M8 bolt.
Top trending discussions
I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.
Refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature reservoir to a high temperature reservoir.
Consists of four main components: compressor, condenser, expansion valve, and evaporator
Refrigerant is compressed in the compressor, then condensed in the condenser, expanded in the expansion valve, and evaporated in the evaporator
Heat is absor...
Refrigeration theory involves the transfer of heat from a low temperature region to a high temperature region using a refrigerant.
Refrigeration is based on the principles of thermodynamics, specifically the second law which states that heat naturally flows from a higher temperature to a lower temperature.
The refrigeration cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.
The...
I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.
A resistor is an electronic component that resists the flow of electrical current.
Resistors are used to control the amount of current flowing in a circuit.
They are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.
Resistors dissipate energy in the form of heat when current flows through them.
Common types of resistors include carbon film, metal film, and wirewound resistors.
A transistor is a semiconductor device used to amplify or switch electronic signals.
Transistors are fundamental building blocks of modern electronic devices.
They can amplify electrical signals, control the flow of current, and act as switches.
Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).
I applied via Company Website and was interviewed in Jan 2020. There were 4 interview rounds.
I applied via Company Website and was interviewed in Feb 2022. There were 4 interview rounds.
I applied via Referral and was interviewed in Jan 2020. There were 4 interview rounds.
Components in electrical panel include circuit breakers, fuses, relays, transformers, and meters.
Circuit breakers protect against overloads and short circuits.
Fuses protect against overcurrents.
Relays control the flow of electricity.
Transformers change the voltage of the electricity.
Meters measure the amount of electricity being used.
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before May 2020. There were 6 interview rounds.
To calculate departmental objectives and targets, a thorough analysis of past performance and future projections is necessary.
Review past performance data to identify areas of improvement
Set specific, measurable, achievable, relevant, and time-bound (SMART) objectives
Identify key performance indicators (KPIs) to track progress towards objectives
Develop action plans to achieve objectives and targets
Regularly monitor and...
Positive thinking is the mindset of focusing on the good and optimistic aspects of a situation.
Positive thinking involves having a positive attitude and outlook on life.
It is about finding the silver lining in difficult situations.
Positive thinking helps in maintaining motivation and resilience.
It involves reframing negative thoughts into positive ones.
Positive thinking can lead to improved mental and physical well-bei...
I applied via Naukri.com and was interviewed before Apr 2021. There were 3 interview rounds.
Answering questions related to sales cycle, current role, target achievement, negotiation, and travel.
Ideal sales cycle involves identifying potential customers, building relationships, understanding their needs, presenting solutions, and closing the deal.
In my current role, I am responsible for managing a team of sales representatives, developing sales strategies, and achieving sales targets.
I have consistently achiev...
based on 2 reviews
Rating in categories
Senior Engineer
69
salaries
| ₹3 L/yr - ₹7 L/yr |
Engineer
66
salaries
| ₹2.5 L/yr - ₹5.4 L/yr |
Assistant Manager
64
salaries
| ₹5.1 L/yr - ₹9.5 L/yr |
Quality Engineer
48
salaries
| ₹1.5 L/yr - ₹4 L/yr |
Production Engineer
19
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Gandhi Automations
Kirloskar Pneumatic
Sulzer
Bharat Fritz Werner