Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Quality Needles Team. If you also belong to the team, you can get access from here

Quality Needles Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Quality Needles Junior Engineer Interview Questions and Answers

Updated 2 Oct 2024

Quality Needles Junior Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jun 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Symbols, leastcount of vernier and micrometer

Round 2 - Technical 

(5 Questions)

  • Q1. About limit fit tolerance
  • Q2. What is annealing
  • Ans. 

    Annealing is a heat treatment process used to reduce hardness and increase ductility of a material.

    • Annealing involves heating a material to a specific temperature and then slowly cooling it down.

    • This process helps to relieve internal stresses, improve machinability, and enhance electrical conductivity.

    • Common examples include steel annealing to improve its ductility and copper annealing to increase its conductivity.

  • Answered by AI
  • Q3. What is tempring
  • Ans. 

    Tempering is a heat treatment process used to improve the toughness and ductility of metals by reducing internal stresses.

    • Tempering involves heating the metal to a specific temperature and then cooling it in a controlled manner.

    • The process helps to reduce the hardness of the metal while increasing its toughness and ductility.

    • Commonly used in the production of steel to achieve the desired balance of strength and flexibi...

  • Answered by AI
  • Q4. About mechanical properties
  • Q5. About thermodynamics
Round 3 - HR 

(2 Questions)

  • Q1. About family back ground
  • Q2. About previous experience

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Pradeep and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Only pradeep and sarath told 

(2 Questions)

  • Q1. Why you are accepting refrence people got a job this organisation....they are no skilled....nikhila is a skilled employee but she's replaced person Surya is very low power skill...bcz of sarath Chandra rou...
  • Q2. Prakash Kumar sahoo is very skilled person but why pradeep reference her old colleague Karthik and jeeva ,,,,then etc people from Wipro company....bcz pradeep thinking is (already I left from this golden e...

Interview Preparation Tips

Topics to prepare for SMC Corporation Senior Engineer interview:
  • Reference from Sarath and pradee
Interview preparation tips for other job seekers - Please if you come to work together with SMC corporation India private limited .. please asking to sarath Chandra rout and pradeep
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(4 Questions)

  • Q1. Personal Professional Hobby Goal
  • Q2. Self introduction
  • Q3. Job responsibilities and working
  • Q4. Family realities

Interview Questionnaire 

2 Questions

Can you work in under pressure

  • Q1. What is process control What work of plc and scada
  • Ans. 

    Process control is the use of techniques and technologies to control and monitor a production process.

    • Process control involves monitoring and adjusting variables in a production process to ensure quality and efficiency.

    • PLC (Programmable Logic Controller) is a type of industrial control system that uses logic-based programming to automate processes.

    • SCADA (Supervisory Control and Data Acquisition) is a system that collec...

  • Answered by AI
  • Q2. Why Are you interested in this job

Interview Preparation Tips

Interview preparation tips for other job seekers - You have good industrial knowledge and attitude
U should save and clean your face

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Lean six sigma must required. Good problem solving techniques, manpower handling, what is your key skill
  • Q2. Bad & good company which is good one
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Any questions technical
  • Q2. Any questions technical product

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Harish Kumar suman form kota rajasthan my qualifications
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. 7 Qc tool and RCA
  • Q2. Calibration type
  • Ans. 

    Calibration type refers to the method used to adjust or set a measuring device to ensure accurate results.

    • Calibration types include internal, external, and third-party calibration.

    • Internal calibration is performed by the user using built-in features of the device.

    • External calibration involves using external equipment or standards to adjust the device.

    • Third-party calibration is done by a certified calibration lab or ser...

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Technical questions
  • Ans. Keep your technical background strong.
  • Answered by Gaurav chunekar

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Why you want to change

Interview Preparation Tips

Interview preparation tips for other job seekers - Easy to crack looking for soldiers who can be on the field

I applied via Campus Placement and was interviewed in Jun 2019. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. How you can control the speed by pressure?
  • Ans. 

    Speed can be controlled by adjusting the pressure of the fluid or gas that powers the system.

    • Pressure can be increased or decreased to control the speed of a system.

    • This is commonly used in hydraulic and pneumatic systems.

    • For example, in a hydraulic system, increasing the pressure of the fluid can increase the speed of a cylinder.

    • Similarly, in a pneumatic system, increasing the pressure of the gas can increase the spee...

  • Answered by AI
  • Q2. What is hydraulic? explain the example and what is the reason of its failure?
  • Ans. 

    Hydraulic refers to the use of fluids to transmit power or energy.

    • Hydraulic systems use liquids such as oil or water to transmit power.

    • Examples include hydraulic brakes in cars and hydraulic lifts in buildings.

    • Failure can occur due to leaks, blockages, or mechanical issues.

    • Regular maintenance and inspection can prevent failure and ensure proper functioning.

  • Answered by AI
  • Q3. What is the plc and its role in automation?
  • Ans. 

    PLC stands for Programmable Logic Controller. It is a digital computer used for automation of electromechanical processes.

    • PLC is used to control and monitor industrial processes.

    • It is programmed using ladder logic or other programming languages.

    • PLC can be used for various applications such as controlling traffic lights, assembly lines, and HVAC systems.

    • It can communicate with other devices and systems through various c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - keep calm and listen carefully..
be confident.. 😀

Skills evaluated in this interview

Quality Needles Interview FAQs

How many rounds are there in Quality Needles Junior Engineer interview?
Quality Needles interview process usually has 3 rounds. The most common rounds in the Quality Needles interview process are Aptitude Test, Technical and HR.
What are the top questions asked in Quality Needles Junior Engineer interview?

Some of the top questions asked at the Quality Needles Junior Engineer interview -

  1. What is anneal...read more
  2. What is tempr...read more
  3. About limit fit tolera...read more

Tell us how to improve this page.

Quality Needles Junior Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

SMC Corporation Interview Questions
3.7
 • 27 Interviews
Essilor Interview Questions
4.1
 • 14 Interviews
Fresenius Interview Questions
3.9
 • 8 Interviews
View all
Quality Needles Junior Engineer Salary
based on 26 salaries
₹2.5 L/yr - ₹4.2 L/yr
At par with the average Junior Engineer Salary in India
View more details

Quality Needles Junior Engineer Reviews and Ratings

based on 3 reviews

3.2/5

Rating in categories

3.5

Skill development

3.2

Work-life balance

3.2

Salary

3.2

Job security

3.5

Company culture

2.7

Promotions

3.2

Work satisfaction

Explore 3 Reviews and Ratings
Junior Engineer
26 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
18 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Quality Needles with

Becton Dickinson

4.0
Compare

Romsons Group Of Industries

3.9
Compare

Essilor

4.1
Compare

SMC Corporation

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview