Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed in Apr 2022. There were 3 interview rounds.
Top trending discussions
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
There are several types of gears used in industrial gearboxes, including spur gears, helical gears, bevel gears, worm gears, and planetary gears.
Spur gears
Helical gears
Bevel gears
Worm gears
Planetary gears
posted on 14 Nov 2019
San tita is useful for measuring the thickness of materials in production engineering.
San tita is a tool used for non-destructive testing of materials.
It is commonly used in industries such as automotive, aerospace, and manufacturing.
San tita can help ensure the quality and integrity of materials used in production processes.
It is useful for detecting defects, cracks, and inconsistencies in materials.
San tita can also ...
I applied via Recruitment Consulltant and was interviewed before Mar 2023. There was 1 interview round.
A forward reverse motor circuit diagram is used to control the direction of rotation of a motor.
The circuit typically includes a power supply, motor, forward and reverse switches, and possibly a control relay.
When the forward switch is activated, the motor rotates in one direction, and when the reverse switch is activated, the motor rotates in the opposite direction.
The control relay may be used to prevent both the for...
Star delta circuit diagram is a method used to reduce starting current in induction motors.
Star delta starter is used for starting induction motors
In star connection, motor windings are connected in a star configuration for reduced voltage during starting
After a certain time, the windings are switched to a delta configuration for full voltage operation
This method helps in reducing starting current and mechanical stress
Thermocouples are temperature sensors that consist of two different metals joined together, generating a voltage proportional to the temperature difference.
Thermocouples are commonly used in industrial applications for temperature measurement.
Types of thermocouples include Type K (chromel/alumel), Type J (iron/constantan), and Type T (copper/constantan).
Each type has a different temperature range and accuracy level.
The...
An oxygen probe is a device used to measure the concentration of oxygen in a gas or liquid.
Oxygen probes typically consist of a sensing element, a reference electrode, and an electrolyte.
The sensing element generates a voltage signal proportional to the oxygen concentration.
The reference electrode provides a stable reference voltage for accurate measurements.
The electrolyte allows oxygen ions to pass through, creating ...
I applied via Company Website and was interviewed before Jan 2020. There was 1 interview round.
The gear box is a crucial component in the machinery, responsible for transmitting power from the engine to the wheels or other parts.
The gear box is responsible for changing the speed and torque of the machinery.
It is important to regularly check and maintain the gear box to ensure optimal performance.
Common issues with gear boxes include leaks, worn gears, and damaged bearings.
Different types of gear boxes include ma...
Gear box equipment material varies based on application and requirements.
Gear boxes can be made of materials such as cast iron, aluminum, steel, and plastic.
The material used depends on factors such as load capacity, speed, and environment.
For example, cast iron is commonly used for heavy-duty applications, while aluminum is used for lighter loads.
Plastic gear boxes are often used in applications where corrosion resist...
To replace a bearing, one needs to know the pitch and PCD. The process involves removing the old bearing and installing the new one.
Pitch refers to the distance between adjacent teeth on a gear or sprocket.
PCD stands for Pitch Circle Diameter and is the diameter of the circle that passes through the center of all the bolts on a wheel.
To replace a bearing, first remove the old bearing by pressing it out or using a beari...
Heat treatment is a process of heating and cooling metals to alter their physical and mechanical properties.
Heat treatment is used to improve the hardness, strength, toughness, and ductility of metals.
It involves heating the metal to a specific temperature and holding it there for a certain amount of time.
The metal is then cooled at a specific rate to achieve the desired properties.
Different types of heat treatment inc...
Gear boxes are used in various applications to transmit power and torque from one rotating shaft to another.
Automotive industry for transmission of power from engine to wheels
Industrial machinery for power transmission in conveyor belts, cranes, etc.
Wind turbines for power transmission from rotor to generator
Marine industry for power transmission in propellers and winches
Aerospace industry for power transmission in air
I applied via Campus Placement and was interviewed before Apr 2020. There were 4 interview rounds.
Gears are mechanical components that transmit power and motion between rotating shafts. There are various types of gears.
Spur gears
Helical gears
Bevel gears
Worm gears
Planetary gears
Rack and pinion gears
Gear nomenclature refers to the standardized system of naming and identifying gears.
Gear nomenclature includes terms such as pitch diameter, face width, and pressure angle.
It is important for engineers to understand gear nomenclature in order to properly design and manufacture gears.
The AGMA (American Gear Manufacturers Association) provides guidelines for gear nomenclature.
Examples of gear types include spur gears, he
Instructions are written or spoken directions for carrying out a task or activity.
Instructions provide guidance and clarity on how to perform a task or activity.
They can be written or spoken, and may include diagrams or illustrations.
Instructions are used in various fields, such as manufacturing, construction, and cooking.
They can also be used for assembling products, operating machinery, or performing medical procedur
Gears transmit power and motion between rotating shafts. They change torque, speed, and direction of rotation.
Gears transmit power and motion between rotating shafts
They change torque, speed, and direction of rotation
They can increase or decrease speed and torque
They can change the direction of rotation
Examples include spur gears, bevel gears, worm gears, and helical gears
based on 1 review
Rating in categories
Assistant Manager
79
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
50
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
50
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
49
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
49
salaries
| ₹0 L/yr - ₹0 L/yr |
Elecon Engineering
Bharat Gears
Shanthi Gears
Altra Industrial Motion India