Upload Button Icon Add office photos

Filter interviews by

PC Jewellers Senior Electrician Interview Questions and Answers

Updated 19 Feb 2024

PC Jewellers Senior Electrician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Electrician 

(4 Questions)

  • Q1. Safety of transformer
  • Ans. 

    The safety of a transformer is crucial to prevent electrical hazards and ensure proper functioning.

    • Regular maintenance and inspections are essential to ensure the transformer is in good condition.

    • Proper grounding and insulation are necessary to prevent electrical shocks and fires.

    • Following safety protocols and guidelines while working with transformers is important to avoid accidents.

    • Using appropriate personal protecti...

  • Answered by AI
  • Q2. Safety of dg set
  • Ans. 

    Ensuring the safety of a DG set involves regular maintenance, proper installation, and adherence to safety protocols.

    • Regular maintenance of the DG set is essential to ensure safe operation.

    • Proper installation of the DG set by qualified professionals is crucial for safety.

    • Adherence to safety protocols such as proper grounding, ventilation, and fuel storage is necessary to prevent accidents.

    • Regular testing and inspection...

  • Answered by AI
  • Q3. Safety of lt panel
  • Ans. 

    Ensuring the safety of LT panels is crucial to prevent electrical hazards and ensure smooth operation of electrical systems.

    • Regular inspection and maintenance of LT panels is essential to identify and address any potential issues.

    • Proper labeling of circuits and components in LT panels can help in quick identification and troubleshooting.

    • Implementing safety protocols and procedures for working on or near LT panels is im...

  • Answered by AI
  • Q4. Nicevjnvb hooigcigcgocpypgxffkxkigzr

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

A white range of altitude questions from verbal , nonverbal , logical and quantitative.

Round 2 - Technical 

(2 Questions)

  • Q1. Information about your previous company.
  • Ans. 

    My previous company was a multinational engineering firm specializing in renewable energy projects.

    • Company focused on renewable energy projects

    • Multinational presence

    • Specialized in engineering services

    • Worked on projects like solar power plants and wind farms

  • Answered by AI
  • Q2. Basic knowledge about your course in which you have completed your degree.
Round 3 - HR 

(1 Question)

  • Q1. About salary negotiation.

Interview Preparation Tips

Topics to prepare for Jindal Power Junior Engineer interview:
  • Aptitude
  • Technical
  • Knowledge about your previous co
Interview preparation tips for other job seekers - Do prepare and give interview with your full focus and don't think any negative things. Be confident and fearless.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. What is the mucromiter list count
  • Ans. 

    The micrometer list count refers to the number of items or components listed in a micrometer measurement tool.

    • The micrometer list count is the total number of items listed on a micrometer measurement tool

    • It helps in accurately measuring the dimensions of small objects or components

    • For example, a micrometer list count of 0.01mm indicates that the tool can measure up to 0.01mm precision

  • Answered by AI
  • Q2. What is the list count of varniya caliper
  • Ans. 

    The list count of varniya caliper is typically 0, as varniya caliper is not a standard or commonly used tool in the field of measurement.

    • Varniya caliper is not a standard tool in the field of measurement

    • There is no specific list count for varniya caliper as it is not commonly used

    • It is important to use standard calipers for accurate measurements

  • Answered by AI
  • Q3. Which material of drill bit
  • Ans. 

    The material of the drill bit depends on the type of material being drilled and the desired outcome.

    • Drill bits can be made of high-speed steel, cobalt steel, carbide, or diamond.

    • High-speed steel drill bits are versatile and suitable for drilling wood, plastic, and soft metals.

    • Cobalt steel drill bits are harder and more heat-resistant, making them ideal for drilling hard metals.

    • Carbide drill bits are extremely hard and ...

  • Answered by AI
  • Q4. Types of center punch
  • Ans. 

    Center punches are tools used to make small indentations in metal or other materials for drilling or marking purposes.

    • Automatic center punch: Spring-loaded for easy one-handed operation

    • Manual center punch: Requires a hammer to create the indentation

    • Transfer punch: Used for transferring hole locations from one material to another

    • Prick punch: Has a sharper point for more precise marking

  • Answered by AI
  • Q5. What types extrusion press
  • Ans. 

    Extrusion presses are used to create products with a consistent cross-sectional profile by forcing material through a die.

    • There are different types of extrusion presses based on the method of operation, such as direct extrusion press, indirect extrusion press, and impact extrusion press.

    • Direct extrusion presses push the material through the die using a ram, while indirect extrusion presses pull the material through the...

  • Answered by AI
  • Q6. Center punch and dot punch angle
  • Ans. Center punch angle 90 Dot punch angle 60
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Jindal Aluminium Technician interview:
  • Tecnication
Interview preparation tips for other job seekers - Good

I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is transformer
  • Ans. 

    A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.

    • Transformers are used to increase or decrease the voltage of an alternating current (AC) power supply.

    • They consist of two coils of wire, known as the primary and secondary coils, which are wrapped around a magnetic core.

    • When an AC voltage is applied to the primary coil, it creates a magne...

  • Answered by AI
  • Q2. And type of breker
  • Ans. 

    The type of breaker used depends on the electrical load and the circuit requirements.

    • The most common types of breakers are standard, AFCI, GFCI, and dual-function.

    • Standard breakers are used for general-purpose circuits.

    • AFCI breakers are used for circuits that power bedrooms and living rooms.

    • GFCI breakers are used for circuits that power bathrooms, kitchens, and outdoor areas.

    • Dual-function breakers combine AFCI and GFCI...

  • Answered by AI
  • Q3. Type of conductor
  • Ans. 

    Conductors are materials that allow electricity to flow through them. There are different types of conductors used in electrical systems.

    • Copper is the most commonly used conductor in electrical wiring

    • Aluminum is also used as a conductor, especially in high voltage power transmission

    • Silver is the best conductor, but it is too expensive for most applications

    • Gold is also a good conductor, but it is even more expensive tha...

  • Answered by AI
  • Q4. Difference of mcb and mccb
  • Ans. 

    MCB is a miniature circuit breaker while MCCB is a molded case circuit breaker.

    • MCB is used for low current applications while MCCB is used for high current applications.

    • MCB is rated up to 100 amps while MCCB can be rated up to 2500 amps.

    • MCCB has adjustable trip settings while MCB does not.

    • MCCB is more expensive than MCB.

    • Examples of MCB brands include Legrand and Schneider while examples of MCCB brands include Siemens a

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All good

I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Why are you choose electrical maintenance and Automation

Interview Preparation Tips

Interview preparation tips for other job seekers - It is very important to have your confidence and attitude at the time of interview date. And your basic should be good because at the time of maximum time interview you are called basic.
good luck?

I appeared for an interview in Dec 2021.

Interview Questionnaire 

2 Questions

  • Q1. What is MGND
  • Ans. 

    MGND stands for Main Ground. It refers to the primary grounding point in an electrical system.

    • MGND is the main grounding point in an electrical system.

    • It is typically connected to the earth ground to provide a safe path for electrical current to flow in case of a fault.

    • MGND helps protect equipment and personnel from electrical shocks.

    • It is an essential component in ensuring electrical safety and proper functioning of t

  • Answered by AI
  • Q2. Why can ground Negative in inverters
  • Ans. 

    Grounding negative in inverters helps in reducing electromagnetic interference (EMI) and noise.

    • Grounding negative in inverters helps in reducing EMI and noise.

    • It also helps in improving the efficiency of the inverter.

    • Grounding negative is done to provide a reference point for the inverter's output voltage.

    • It also helps in protecting the inverter from voltage spikes and surges.

    • Examples of inverters that use negative gro...

  • Answered by AI
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I applied via Company Website

Round 1 - Technical 

(6 Questions)

  • Q1. AC,DC Cable laying
  • Ans. Manpower handling at site on daily basis.
  • Answered Anonymously
  • Q2. Module InstallationWork
  • Q3. Ac Dc Trench Excavation.
  • Q4.  String Inter Connection & Rectification Work
  • Q5. Supervision on field activity& overall activity of maintenance andmaking all schedule of daily activity
  • Q6. Coordinate with site teams for smooth operation of site activities.
  • Ans. 

    Coordinate with site teams to ensure smooth operation of site activities.

    • Regular communication with site teams to understand their needs and challenges

    • Provide necessary support and resources to site teams

    • Address any issues or conflicts that may arise among site teams

    • Ensure all site activities are aligned with project timelines and goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All my ideal younger and elder brothers are educated people and I would like to advise them that you should struggle to reach your destination.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Mobile Chaucer plant
  • Q2. Ster-delt connection
Round 3 - Technical 

(3 Questions)

  • Q1. NO NC connection
  • Q2. Wiring system all type
  • Q3. Home wiring system

Interview Preparation Tips

Topics to prepare for Rungta Mines Electrician interview:
  • Electrician experience
Interview preparation tips for other job seekers - Electrician experience 5 years working experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Physics chemistry maths

Round 2 - Technical 

(4 Questions)

  • Q1. What is ohm's law
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.

    • Ohm's law is represented by the formula V = I * R, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if a circuit has a vol...

  • Answered by AI
  • Q2. What is galvanometer
  • Ans. 

    A galvanometer is a device used to detect and measure small electric currents.

    • Galvanometers typically consist of a coil of wire in a magnetic field, which deflects in response to the current flowing through it.

    • They are often used as components in more complex instruments like ammeters and voltmeters.

    • Galvanometers can be analog or digital, with analog versions displaying readings on a scale and digital versions showing ...

  • Answered by AI
  • Q3. What is power factor ?
  • Ans. 

    Power factor is the ratio of real power to apparent power in an electrical system.

    • Power factor is a measure of how effectively electrical power is being used in a system.

    • It is calculated by dividing the real power (in watts) by the apparent power (in volt-amperes).

    • A power factor of 1 indicates all the power is being used effectively, while a power factor less than 1 indicates inefficiency.

    • Improving power factor can red...

  • Answered by AI
  • Q4. What is galvenisation?
  • Ans. 

    Galvanization is the process of applying a protective zinc coating to steel or iron to prevent rusting.

    • Galvanization involves immersing the metal in a bath of molten zinc or using an electroplating process.

    • The zinc coating acts as a sacrificial anode, protecting the underlying metal from corrosion.

    • Common examples of galvanized items include galvanized steel pipes, fences, and roofing materials.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I belong to middle family. So I join my post as electrician post of iti. Then I earn more money.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Plc and scada analog Electronics
  • Q2. Transmission and destitution
  • Q3. Electrical machine
  • Q4. Basic of Electrical engineering
  • Q5. Digital electronics
  • Q6. Electrical instrument and measurement

Interview Preparation Tips

Interview preparation tips for other job seekers - I am good technician

PC Jewellers Interview FAQs

How many rounds are there in PC Jewellers Senior Electrician interview?
PC Jewellers interview process usually has 2 rounds. The most common rounds in the PC Jewellers interview process are Resume Shortlist.
What are the top questions asked in PC Jewellers Senior Electrician interview?

Some of the top questions asked at the PC Jewellers Senior Electrician interview -

  1. Safety of transfor...read more
  2. Safety of dg ...read more
  3. Safety of lt pa...read more

Tell us how to improve this page.

PC Jewellers Senior Electrician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Rungta Mines Interview Questions
4.1
 • 88 Interviews
Coal India Interview Questions
4.0
 • 48 Interviews
Hindustan Zinc Interview Questions
3.8
 • 43 Interviews
Jindal Power Interview Questions
4.1
 • 29 Interviews
View all
Sales Executive
130 salaries
unlock blur

₹1 L/yr - ₹3.5 L/yr

Executive Accountant
78 salaries
unlock blur

₹1.7 L/yr - ₹4.2 L/yr

Showroom Manager
44 salaries
unlock blur

₹4.7 L/yr - ₹8 L/yr

Assistant Manager
32 salaries
unlock blur

₹3 L/yr - ₹6.5 L/yr

Accountant
32 salaries
unlock blur

₹1.4 L/yr - ₹4.9 L/yr

Explore more salaries
Compare PC Jewellers with

Hindalco Industries

4.2
Compare

Rungta Mines

4.0
Compare

Hindustan Zinc

3.8
Compare

Vedanta Resources

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview