Upload Button Icon Add office photos

Filter interviews by

ORISSA METALIKS CCM Shift Incharge Interview Questions, Process, and Tips

Updated 30 Sep 2022

ORISSA METALIKS CCM Shift Incharge Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. What's shift incharge responsibilities.
  • Q2. What does it means 6/11meter radius machine.
  • Q3. What is melting point of iron.
  • Ans. 

    The melting point of iron is approximately 1,538 degrees Celsius.

    • The melting point of iron is an important property in metallurgy.

    • Iron transitions from a solid to a liquid state at its melting point.

    • The melting point of iron is higher than that of many other common metals.

    • Iron's melting point allows it to be easily shaped and molded in various industrial processes.

  • Answered by AI
  • Q4. What is superheat in molten metal
  • Ans. 

    Superheat in molten metal is the temperature difference between the actual temperature of the metal and its melting point.

    • Superheat is the amount of heat added to the metal above its melting point.

    • It is important to maintain the correct superheat to ensure proper casting and solidification.

    • Superheat can be measured using thermocouples or pyrometers.

    • Excessive superheat can lead to metal shrinkage and porosity, while ins...

  • Answered by AI
  • Q5. What is electric magnetic stirring system.
  • Ans. 

    Electric magnetic stirring system is a method of stirring molten metal using electromagnetic fields.

    • It uses a magnetic field to create a rotating motion in the molten metal.

    • The system consists of a coil that generates the magnetic field and a power supply to control the frequency and intensity of the field.

    • It is commonly used in the steel industry to improve the quality and consistency of the metal.

    • It can also be used ...

  • Answered by AI
  • Q6. What is negative streep percentage.
  • Ans. 

    Negative strip percentage refers to the percentage of defective products in a manufacturing process.

    • It is a measure of the quality of the manufacturing process.

    • It is calculated by dividing the number of defective products by the total number of products produced and multiplying by 100.

    • For example, if a company produces 1000 products and 50 of them are defective, the negative strip percentage would be 5%.

    • A high negative...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am anytime available to achieve interview. Because I am able to contribute my skill to any organization.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be honest with your years of experience. All information you share will be verified at the time of joining.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Problem Solving, past assignments
Round 3 - HR 

(1 Question)

  • Q1. Flexible work timings, notice period
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Average tooling questions
  • Q2. On past experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Not for long term

Engineer Interview Questions & Answers

MITA user image Anonymous

posted on 30 Jun 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Your job related
  • Q2. Last job function
  • Ans. 

    Designing and implementing software solutions for a tech company

    • Developing new features for software products

    • Troubleshooting and debugging code

    • Collaborating with team members on projects

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is hardening
  • Ans. 

    Hardening is the process of making something harder or stronger, often through heat treatment or other methods.

    • Hardening is commonly used in metallurgy to improve the strength and durability of metals.

    • One example of hardening is heat treating steel to increase its hardness and wear resistance.

    • Hardening can also refer to the process of making software or systems more secure against cyber attacks.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(4 Questions)

  • Q1. Basic Information and qualifications
  • Q2. Work experience and knowledge
  • Q3. Accounting and commercial question, MIS Office, SAP Erp. Experience
  • Q4. MIS Reports, Data Maintain

Interview Preparation Tips

Interview preparation tips for other job seekers - Build Confidence And gain knowledge little but strong.

I applied via Walk-in and was interviewed in Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Telling about technical
  • Q2. About programming and communication skills
Round 3 - Coding Test 

Given to decode the numbers

Interview Preparation Tips

Topics to prepare for Trelleborg Assistant Engineer interview:
  • Programind designing
Interview preparation tips for other job seekers - Dear sir.
Export in fanuc and semens programing

I applied via Recruitment Consulltant and was interviewed before Oct 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself?
  • Q2. Your family background
Round 3 - Technical 

(1 Question)

  • Q1. GD and T,Write a program what you have done in your past company.
Round 4 - Technical 

(1 Question)

  • Q1. This will be final round from GM ,he will ask you about your past experience technical questions, about company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for program. GDandT and your past company parts and definition .

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Jan 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. General Questiones
Round 2 - Technical 

(1 Question)

  • Q1. Basics and Intermediate level
Round 3 - One-on-one 

(1 Question)

  • Q1. Behaviour and Logicals

ORISSA METALIKS Interview FAQs

How many rounds are there in ORISSA METALIKS CCM Shift Incharge interview?
ORISSA METALIKS interview process usually has 2 rounds. The most common rounds in the ORISSA METALIKS interview process are Resume Shortlist and Technical.
What are the top questions asked in ORISSA METALIKS CCM Shift Incharge interview?

Some of the top questions asked at the ORISSA METALIKS CCM Shift Incharge interview -

  1. What does it means 6/11meter radius machi...read more
  2. What is electric magnetic stirring syst...read more
  3. What is superheat in molten me...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Concentric Interview Questions
3.8
 • 36 Interviews
Europa Locks Interview Questions
3.6
 • 20 Interviews
PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
MITA Interview Questions
3.7
 • 14 Interviews
Ewac Alloys Interview Questions
4.2
 • 12 Interviews
View all

ORISSA METALIKS CCM Shift Incharge Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

4.0

Work-life balance

4.0

Salary

2.0

Job security

3.0

Company culture

4.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Assistant Engineer
52 salaries
unlock blur

₹1.7 L/yr - ₹4.1 L/yr

Junior Engineer
31 salaries
unlock blur

₹1.4 L/yr - ₹3 L/yr

Assistant Manager
22 salaries
unlock blur

₹4 L/yr - ₹9.2 L/yr

Shift Incharge
20 salaries
unlock blur

₹3.6 L/yr - ₹7.2 L/yr

Electrical Engineer
18 salaries
unlock blur

₹2 L/yr - ₹4.4 L/yr

Explore more salaries
Compare ORISSA METALIKS with

Europa Locks

3.6
Compare

Trelleborg

3.9
Compare

Case New-Holland Construction Equipment India

4.0
Compare

Tokai Rubber Auto Parts India

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview