Upload Button Icon Add office photos

Filter interviews by

Clear (1)

National Small Industries Corporation CMA Trainee Interview Questions and Answers

Updated 18 Oct 2024

National Small Industries Corporation CMA Trainee Interview Experiences

2 interviews found

CMA Trainee Interview Questions & Answers

user image MEGHA NETAWANE

posted on 18 Oct 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2023. There were 2 interview rounds.

CMA Trainee Interview Questions & Answers

user image Anonymous

posted on 17 Mar 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Interview Preparation Tips

Topics to prepare for National Small Industries Corporation CMA Trainee interview:
  • GST
  • TDS sections
  • Journal entries
  • Tally ERP
  • MS excel
Interview preparation tips for other job seekers - It's good for freshers.

CMA Trainee Interview Questions Asked at Other Companies

Q1. HOW MARGINAL COSTING IS RELATED IN IOCL
Q4. What is BCG Matrix

Interview questions from similar companies

Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Approached by Company and was interviewed before Jun 2023. There were 2 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - Apply if you are ready to stay in deadlock situation about the status of your interview

Interview Questionnaire 

7 Questions

  • Q1. Question of Stoichiometry
  • Q2. Define adiabatic saturation temperature
  • Ans. 

    Adiabatic saturation temperature is the temperature of air when it is fully saturated with water vapor.

    • It is the temperature of air when it is fully saturated with water vapor

    • It is the temperature at which the rate of evaporation equals the rate of condensation

    • It is used in the design and analysis of cooling towers and evaporative coolers

  • Answered by AI
  • Q3. Question on greenhouse effect
  • Q4. Ordering different gases obtained from coal gasification on the basis of calorific value
  • Ans. 

    The order of different gases obtained from coal gasification based on calorific value can be determined by comparing their heating values.

    • Calorific value is the amount of heat energy released when a substance is burned.

    • The higher the calorific value, the more energy the gas can produce.

    • The order of gases based on calorific value is: hydrogen, methane, carbon monoxide, and carbon dioxide.

    • Hydrogen has the highest calorif...

  • Answered by AI
  • Q5. Question on summer internship project.
  • Q6. Define your role as the general secretary of your college environmental club
  • Ans. 

    As the general secretary of my college environmental club, my role was to lead and coordinate various activities and initiatives related to environmental conservation and sustainability.

    • Organizing and conducting awareness campaigns and workshops on environmental issues

    • Planning and executing eco-friendly events and activities

    • Collaborating with other clubs and organizations to promote sustainable practices

    • Maintaining com...

  • Answered by AI
  • Q7. Describe one problem you faced as the General Secretary and how you were able to solve it.
  • Ans. 

    As General Secretary, I faced the problem of low attendance at meetings. I solved it by implementing a reward system.

    • Identified the root cause of the problem

    • Conducted a survey to understand the reasons for low attendance

    • Implemented a reward system for members with high attendance

    • Communicated the new system effectively to all members

    • Monitored attendance regularly and recognized members with high attendance

    • Attendance imp...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The written round consisted of 200 questions in 2 hours
1> Technical section (100 questions)
2> Numerical aptitude (25 questions)
3> Logical Reasoning (25 questions)
4> General Awareness (25 questions)
5> English (25 questions)

The level of difficulty of the technical section was quite easy. Most of the questions were for checking the overall concepts and none of them included lengthy calculations. Though time is a factor as you have to solve 100 questions in about 1 hour.
One interesting fact about the exam was that both unanswered questions and wrongly answered questions would cost you negative 1/4th marks and thus it is better to attempt all questions. Some of the questions were from ‘uncommon’ sections like Polymer processing, materials of construction etc.


The mathematical aptitude and logical reasoning questions were very easy and practicing R.S Agarwall level questions would be sufficient. Unlike other PSU exams like ONGC, EIL etc., the general awareness section of SAIL’s exam consisted mostly of contemporary ‘hot topics’ and current affairs rather than generic topics like history, geography.
Tips: For the Technical section I would recommend solving :
1> Chemical engineering objective questions by Ram Prasad
2> Indiabix.com
3> 1 marks questions from previous year GATE papers.

I would recommend the following books for the general awareness sections
1> Lucent’s General Knowledge
2> Monthly current affairs magazines like Pratiyogita Darpan, Competition success etc.
Duration: 120 minutes
Total Questions: 200

Round: Group Discussion
Experience: Around 40 people were selected for the GD-PI round for a total of 11 general seats in chemical engineering. Among all the PSU’s, the GD round of SAIL was the most interesting and unique. The GD round itself consisted of 3 separate rounds which continued for about 2 hours.
There were about 10 people in each group and about 5 judges.

Round 1
A general topic was given to the group for discussion. The discussion continued for 20 minutes and the group was not directed to present a final conclusion.
The judges scored each participant on the basis of how they were able to communicate and present their point of view

Round 2
10 qualities like honesty, integrity, knowledge etc. were listed and the group was given a task to order the qualities on the basis of which is most requisite of a politician. Initially each individual had to give his order and submit it to the judges and then the topic would be up for discussion for a period of about 20 minutes. At the end of the discussion, the group was asked to present a final conclusive order.
The judges scored each individual on the basis of
1> How well he was able to communicate his point of view
2> Whether the final order varied from the order that he had submitted initially. That is whether he was able to justify his point of view and persuade others or else he was himself swayed by others in the discussion.

Round 3
The group was presented with a case study. The scenario was that the CEO of a bank was going to retire and his replacement was to be selected out of 5 probable candidates. The profile of the bank and its future path was given to us and also the profiles of the 5 candidates in a 5-6 pages long document. Each individual was given 20 minutes to read the document and present his choice. The topic was then open for discussion for about 20 minutes. At the end of the discussion, the group was asked to come to a final conclusion.
The judges graded each candidate on the basis of
1> How well was he able to communicate his point of view
2> Whether he had read the case study in detail and was clear about his choice.
3> Whether he was able to justify his choice to the other members of the group.
Tips: The judges graded each candidate on the basis of
1> How well was he able to communicate his point of view
2> Whether he had read the case study in detail and was clear about his choice.
3> Whether he was able to justify his choice to the other members of the group.
Duration: 120 minutes

Round: Technical Interview
Experience: The technical interview was of very short duration of about 15 minutes and wasnt tough either. The interviewer might try to confuse you a bit.

Round: HR Interview
Experience: The HR questions were mostly directed towards the extracurricular activities that I had done during college

College Name: NIT DURGAPUR

Interview Questionnaire 

1 Question

  • Q1. How a Lease is terminated?
  • Ans. 

    A lease can be terminated through mutual agreement, expiration, breach, or eviction.

    • Mutual agreement: Both parties agree to end the lease before the agreed-upon term.

    • Expiration: The lease ends naturally after the agreed-upon term.

    • Breach: One party violates the terms of the lease, allowing the other party to terminate it.

    • Eviction: The landlord legally removes the tenant from the property due to non-payment or other viol

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: A lease is a contract and if in writing, would be governed by its terms and conditions. A lease gets terminated by flux of time. Otherwise the provisions of Section 106 of the Transfer of Property Act would apply. A lease for Industrial or agricultural purpose would be a lease from year to year and need six months notice while other type of leases would run from moth to month and can be terminated by fifteen days' notice. Their GM Law sitting on the panel probably was not aware about six moths' notice and he immediately summoned for the bare Act. On finding the answer correct he gave me a standing ovation and told me there and then that I was selected and I would receive my appointment letter. I did get the letter but did not join as by that time I had got selected for the post of Manager Law in Bank of Baroda and being from the banking stream then working for Dena Bank I opted to continue in the Banking sector.

I appeared for an interview before May 2021.

Interview Preparation Tips

Topics to prepare for Steel Authority Of India Management Trainee interview:
  • Physical Metallurgy
  • Mechanical Metallurgy
  • iron making
  • Steel Making
Interview preparation tips for other job seekers - If you qualify GATE with a good rank then this process will be cake walk for you. All the best to SAIL through.

I applied via Company Website and was interviewed before Jun 2021. There were 2 interview rounds.

Interview Preparation Tips

Topics to prepare for Oil And Natural Gas Corporation Intern interview:
  • Contracts
  • Energy Management
Interview preparation tips for other job seekers - get a good drafted resume
try using IRAC method while doing the assignment
add as many as case laws

I applied via Employment News and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is Go NoGo gauge ?
  • Ans. 

    Go NoGo gauge is a precision measuring tool used to check if a part meets the specified tolerances or not.

    • It is a simple pass/fail gauge used in manufacturing and quality control.

    • It has two ends, one for the maximum limit and the other for the minimum limit.

    • If the part fits in the maximum end and not in the minimum end, it passes the test.

    • If the part fits in the minimum end and not in the maximum end, it fails the test...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be through with your core engineering subjects and have clarity about your B.Tech / BE final year projects.

Manager Interview Questions & Answers

BHEL user image Anonymous

posted on 14 Nov 2021

I applied via Company Website and was interviewed before Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident Sound knowledge of power plant engineering will help
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jan 2022. There were 4 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - Required strong verbal and written skills.
Good presentability with advance MS Office skills
Contribute & help others!
anonymous
You can choose to be anonymous

National Small Industries Corporation Interview FAQs

How many rounds are there in National Small Industries Corporation CMA Trainee interview?
National Small Industries Corporation interview process usually has 1-2 rounds. The most common rounds in the National Small Industries Corporation interview process are One-on-one Round and HR.
What are the top questions asked in National Small Industries Corporation CMA Trainee interview?

Some of the top questions asked at the National Small Industries Corporation CMA Trainee interview -

  1. Applicability of ...read more
  2. Sections of ...read more
  3. Journal entry of credit note, debit no...read more

Recently Viewed

SALARIES

Bangalore Electricity Supply Company

REVIEWS

National Small Industries Corporation

No Reviews

COMPANY BENEFITS

National Small Industries Corporation

No Benefits

SALARIES

Konkan Railway Corporation

REVIEWS

Bangalore Electricity Supply Company

No Reviews

SALARIES

Indian Space Research Organisation

SALARIES

Konkan Railway Corporation

COMPANY BENEFITS

Fertilisers and Chemicals Travancore

No Benefits

SALARIES

National Small Industries Corporation

SALARIES

Konkan Railway Corporation

Tell us how to improve this page.

National Small Industries Corporation CMA Trainee Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
National Small Industries Corporation CMA Trainee Salary
based on 10 salaries
₹1 L/yr - ₹2 L/yr
51% less than the average CMA Trainee Salary in India
View more details

National Small Industries Corporation CMA Trainee Reviews and Ratings

based on 3 reviews

4.8/5

Rating in categories

4.8

Skill development

4.9

Work-life balance

4.6

Salary

4.9

Job security

4.9

Company culture

4.4

Promotions

4.7

Work satisfaction

Explore 3 Reviews and Ratings
Executive Accountant
12 salaries
unlock blur

₹2 L/yr - ₹3.6 L/yr

Deputy Manager
11 salaries
unlock blur

₹9.5 L/yr - ₹14 L/yr

CMA Trainee
10 salaries
unlock blur

₹1 L/yr - ₹2 L/yr

Executive Assistant
9 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Manager Marketing & Business Development
8 salaries
unlock blur

₹14 L/yr - ₹14 L/yr

Explore more salaries
Compare National Small Industries Corporation with

Small Industries Development Bank of India

4.0
Compare

Khadi and Village Industries Commission

4.3
Compare

National Research Development Corporation

3.6
Compare

NATIONAL SKILL DEVELOPMENT CORPORATION

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview