Upload Button Icon Add office photos

Filter interviews by

Mvs Acmei Technologies Condition Monitoring Technician Interview Questions, Process, and Tips

Updated 22 Nov 2024

Mvs Acmei Technologies Condition Monitoring Technician Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Nov 2023. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. What is vibration analysis
  • Ans. 

    Vibration analysis is a technique used to monitor and analyze the vibration levels of machinery to detect faults and potential failures.

    • It involves measuring the vibration levels of machinery using specialized equipment.

    • By analyzing the vibration patterns, technicians can identify potential faults such as unbalance, misalignment, or bearing wear.

    • Vibration analysis helps in predicting and preventing machinery failures, ...

  • Answered by AI
  • Q2. Why do we do condition monitoring
  • Ans. 

    Condition monitoring helps to predict equipment failures, prevent downtime, and optimize maintenance schedules.

    • To predict equipment failures before they occur

    • To prevent unexpected downtime and production losses

    • To optimize maintenance schedules and reduce costs

    • To extend the lifespan of equipment and improve overall reliability

    • To ensure safety and compliance with regulations

    • Examples: monitoring vibration levels in rotati...

  • Answered by AI
  • Q3. What do you understand about Lazer
  • Q4. What causes vibration
  • Ans. 

    Vibration can be caused by unbalanced components, misalignment, loose parts, worn bearings, or resonance.

    • Unbalanced components create vibration due to unequal distribution of mass

    • Misalignment of shafts can lead to vibration as the rotating parts are not in proper alignment

    • Loose parts can cause vibration as they move around during operation

    • Worn bearings can result in vibration due to increased friction and lack of suppo...

  • Answered by AI
  • Q5. What is thermographic inspection
  • Ans. 

    Thermographic inspection is a non-destructive testing technique that uses infrared cameras to detect temperature variations in an object or system.

    • Uses infrared cameras to capture thermal images

    • Detects temperature variations that may indicate potential issues

    • Non-destructive testing method for condition monitoring

    • Commonly used in electrical systems, mechanical equipment, and building inspections

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Mvs Acmei Technologies Condition Monitoring Technician interview:
  • Gear box maintenance
  • Types of bearing
Interview preparation tips for other job seekers - What is your experience back ground

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General technical question

Round 2 - Technical 

(1 Question)

  • Q1. Basics question, technical question. Share Previous working experience.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be cool focused on self confidence. Present your self honestly. Don't think about interview questions. Just act your natural behavior.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Self introduction
  • Q2. Key project and learning
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Group Discussion 

Discussed on Denomination topic

Round 3 - Technical 

(2 Questions)

  • Q1. About machining information
  • Q2. About instrument information
Round 4 - HR 

(1 Question)

  • Q1. Personal information questions

Interview Preparation Tips

Interview preparation tips for other job seekers - No advice from my side. thank you good day.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the source name of the laser cutting machine ?
  • Ans. 

    The source name of the laser cutting machine is typically the manufacturer's name or a specific model name.

    • The source name could be the manufacturer's name, such as Trumpf or Amada.

    • It could also be a specific model name, like Trumpf TruLaser Series or Amada LC3015.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Spindle motor assembly

I applied via Recruitment Consultant and was interviewed before Oct 2019. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What is meaning of civil engineering.?
  • Ans. 

    Civil engineering is a branch of engineering that deals with the design, construction, and maintenance of infrastructure.

    • Civil engineering involves the planning, design, and construction of structures such as buildings, bridges, roads, and dams.

    • It focuses on ensuring the safety, functionality, and sustainability of infrastructure projects.

    • Civil engineers use principles of physics, mathematics, and materials science to ...

  • Answered by AI
  • Q2. How you given organization profits in your allocated job role.?
  • Q3. What are the main quality focus on civil engineering field?
  • Ans. 

    The main quality focus in civil engineering is safety, durability, and sustainability.

    • Ensuring the safety of structures and infrastructure

    • Designing for durability and longevity

    • Incorporating sustainable practices and materials

    • Adhering to building codes and regulations

    • Conducting thorough inspections and testing

    • Using advanced technology and software for design and analysis

    • Collaborating with other professionals to ensure q

  • Answered by AI
  • Q4. How you doing project efficient?

Interview Preparation Tips

Interview preparation tips for other job seekers - basically you to know about all basic terms and conditions? not at all be confidential in your own field as like civil engineering.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Mathematics, logical reasoning

Round 3 - Coding Test 

C/C++, device driver, Networking, objectives

Interview Preparation Tips

Interview preparation tips for other job seekers - Mid level interview, Basics questions and objectives in c/c++
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Provide 3d view for given 2d views
  • Ans. 

    To provide a 3D view for given 2D views, you can use software like AutoCAD or SolidWorks to create a 3D model based on the 2D drawings.

    • Use software like AutoCAD or SolidWorks to convert 2D views into a 3D model

    • Identify key dimensions and features from the 2D views to accurately create the 3D model

    • Consider perspective, scale, and proportions when creating the 3D view

  • Answered by AI
  • Q2. Draw sfd and bfd
  • Ans. 

    SFD and BFD are diagrams used in software engineering to visualize the flow of data and control in a system.

    • SFD (System Flow Diagram) shows the flow of data between different components in a system.

    • BFD (Block Flow Diagram) shows the flow of control between different components in a system.

    • Both diagrams help in understanding the overall structure and behavior of a system.

    • Examples: SFD can show how user input flows throu...

  • Answered by AI
  • Q3. What is stress and strain
  • Ans. 

    Stress is the force applied to a material, while strain is the resulting deformation or change in shape.

    • Stress is the external force acting on an object, measured in units of force per unit area

    • Strain is the measure of deformation or change in shape of a material due to stress

    • Stress and strain are related by the material's modulus of elasticity, which determines how much a material will deform under stress

    • Example: When...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare well regards mechanical subjects
Interview experience
1
Bad
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Technical knowledge
  • Q2. Past Experience
Round 2 - Aptitude Test 

Technical Knowledge about field

Interview Preparation Tips

Interview preparation tips for other job seekers - Never choose this Management

Mvs Acmei Technologies Interview FAQs

How many rounds are there in Mvs Acmei Technologies Condition Monitoring Technician interview?
Mvs Acmei Technologies interview process usually has 1 rounds. The most common rounds in the Mvs Acmei Technologies interview process are One-on-one Round.
What are the top questions asked in Mvs Acmei Technologies Condition Monitoring Technician interview?

Some of the top questions asked at the Mvs Acmei Technologies Condition Monitoring Technician interview -

  1. Why do we do condition monitor...read more
  2. What is thermographic inspect...read more
  3. What is vibration analy...read more

Tell us how to improve this page.

Mvs Acmei Technologies Condition Monitoring Technician Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more
Mvs Acmei Technologies Condition Monitoring Technician Salary
based on 4 salaries
₹2.5 L/yr - ₹3.4 L/yr
55% less than the average Condition Monitoring Technician Salary in India
View more details

Mvs Acmei Technologies Condition Monitoring Technician Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

5.0

Work-life balance

4.0

Salary

4.0

Job security

5.0

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Condition Monitoring Engineer
30 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Engineer
26 salaries
unlock blur

₹1.4 L/yr - ₹3.6 L/yr

Senior Engineer
26 salaries
unlock blur

₹4.2 L/yr - ₹7.1 L/yr

Mechanical Engineer
21 salaries
unlock blur

₹1.6 L/yr - ₹4 L/yr

Senior Executive
15 salaries
unlock blur

₹3 L/yr - ₹6.5 L/yr

Explore more salaries
Compare Mvs Acmei Technologies with

Gilbarco Veeder Root

3.8
Compare

Kirloskar Toyota Textile Machinery

4.5
Compare

HYT Engineering

3.2
Compare

L&T–MHI Power Boilers

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview