Filter interviews by
Clear (1)
I applied via Walk-in and was interviewed in Feb 2024. There were 4 interview rounds.
The unit of resistance is Ohm (Ω).
The unit of resistance is denoted by the symbol Ω (Ohm)
Resistance is measured in Ohms
Named after German physicist Georg Simon Ohm
Commonly used in electrical circuits
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to the resistance.
Ohm's Law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.
It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.
It is named after the German physicist Georg Simon Ohm w
Our discussion was on how to maintain electrical machines healthy .So we discussed and found many ideas .It was really nice discussion i had
I ensure confidentiality by following company policies, maintaining data security, and keeping sensitive information private.
Adhering to company policies regarding confidentiality
Using secure methods for storing and transmitting data
Avoiding discussing sensitive information with unauthorized individuals
My strengths include strong problem-solving skills, attention to detail, and ability to work well under pressure.
Strong problem-solving skills
Attention to detail
Ability to work well under pressure
Voltage is the difference in electric potential between two points in a circuit, measured in volts.
Voltage is the force that pushes electric current through a circuit
It is measured in volts (V)
Voltage is the potential difference between two points in a circuit
Higher voltage means more energy available to move electrons
Voltage can be DC (direct current) or AC (alternating current)
Top trending discussions
posted on 16 Dec 2021
I applied via Campus Placement and was interviewed in Nov 2021. There were 3 interview rounds.
posted on 15 Apr 2022
I was interviewed in Oct 2021.
posted on 19 Oct 2017
I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.
A circuit breaker is an electrical switch that automatically interrupts the flow of current when it exceeds a certain limit.
It is used to protect electrical circuits from damage caused by overloading or short circuits.
It works by detecting the excess current and tripping the switch to break the circuit.
It can be reset manually or automatically depending on the type of circuit breaker.
Examples include thermal circuit br...
A contactor is an electrical switch used for switching an electrical circuit on or off.
It is used to control electric motors, lighting, heating, and other electrical loads.
It consists of a coil, contacts, and an enclosure.
The coil generates a magnetic field that pulls the contacts together to close the circuit.
Examples include HVAC systems, elevators, and industrial machinery.
Contactor ratings are based on the amount o...
MCB stands for Miniature Circuit Breaker. It is an electrical switch that automatically shuts off the electrical circuit during an overload or short circuit.
MCB is a type of circuit breaker that is commonly used in residential and commercial buildings.
It is designed to protect electrical circuits from damage caused by overloading or short circuits.
MCBs are available in different current ratings and can be easily replac...
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors are used in various applications such as electric vehicles, industrial machinery, and household appliances.
There are different types of motors such as DC motors, AC motors, stepper motors, and servo motors.
The basic principle of a motor is the interaction between a magnetic field and an electric current.
Examples of motor...
A current transformer is a device that measures the current flowing in a circuit by producing a proportional current in its secondary winding.
Consists of a primary winding and a secondary winding
Primary winding is connected in series with the circuit carrying the current to be measured
Secondary winding is connected to a measuring instrument or protective relay
Produces a current in the secondary winding that is proporti...
I applied via Recruitment Consultant and was interviewed in May 2021. There was 1 interview round.
posted on 15 Jul 2017
I was interviewed before Jul 2016.
I applied via Campus Placement and was interviewed in Jun 2022. There were 3 interview rounds.
Home's law is a principle that states that the current flowing through a conductor is directly proportional to the voltage applied across it.
Home's law is also known as Ohm's law.
It is expressed as I = V/R, where I is the current, V is the voltage, and R is the resistance.
This law is fundamental to the study of electrical circuits and is used to calculate the behavior of circuits.
For example, if the voltage across a re...
The current unit is the ampere (A), which measures the flow of electric charge.
The unit of electric current is the ampere (A).
Current is the rate of flow of electric charge.
It is measured using an ammeter.
One ampere is equal to one coulomb of charge passing through a point in one second.
Voltage is the unit of measurement for electric potential difference.
Voltage is the force that pushes electric charges through a circuit.
It is measured in volts (V).
Voltage is essential for the operation of electrical devices.
Examples of voltage units include millivolts (mV), kilovolts (kV), and megavolts (MV).
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it.
Ohm's law is expressed as V = I * R, where V is the voltage, I is the current, and R is the resistance.
The current symbol is represented by the letter 'I'.
Ohm's law is fundamental in understanding and analyzing electrical circuits.
Example: If a circuit has a voltage of 12 volts and a resistance of 4 o...
The two types of winding in electrical engineering are lap winding and wave winding.
Lap winding is used in DC machines and is characterized by multiple parallel paths for current flow.
Wave winding is used in AC machines and is characterized by a single path for current flow.
Lap winding provides high current capacity and low voltage output, while wave winding provides low current capacity and high voltage output.
In lap ...
The primary winding is the first coil in a transformer that receives electrical energy.
The primary winding is typically connected to the power source.
It is responsible for receiving and transmitting electrical energy to the secondary winding.
The number of turns in the primary winding determines the voltage ratio between the primary and secondary sides.
Primary windings are commonly found in transformers, induction motor
I applied via Walk-in and was interviewed in Apr 2022. There were 2 interview rounds.
Discuss about trouble shooting in production, Induction Hardening machines programming, new job settings and manpower handling.
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
based on 1 interview
Interview experience
Senior Design Engineer
141
salaries
| ₹0 L/yr - ₹0 L/yr |
Lead Engineer
134
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
133
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
102
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Engineer
94
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Tata Motors
Mahindra & Mahindra
Ashok Leyland