Upload Button Icon Add office photos

Filter interviews by

Khaitan Chemicals & Fertilizers QC Lab Chemist Interview Questions and Answers

Updated 27 Feb 2022

Khaitan Chemicals & Fertilizers QC Lab Chemist Interview Experiences

1 interview found

I applied via Referral and was interviewed before Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. Primary question is introduction
  • Q2. Sir myself Himanshu Tiwari am from up sln
  • Q3. What is your qualifications
  • Q4. My qualifications is am post graduate
  • Q5. And what about fertilizers company any idea
  • Q6. Yas sir there r three type of fertilizers industry ssp urrea npk

Interview Preparation Tips

Interview preparation tips for other job seekers - Primary we have to go infront of interviewer in attractive way which impact on the them second think you have to listen interviewers carefully and then anwer that after thinking a little bit on that topic if know about that then other told them soory sir i don't about this

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Referral

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Types of starters for motor
  • Ans. 

    Starters are used to control the starting and stopping of motors. Types include DOL, star-delta, soft starters, and VFDs.

    • Direct-On-Line (DOL) starters provide full voltage to the motor at start-up

    • Star-Delta starters reduce the voltage during start-up to reduce inrush current

    • Soft starters gradually increase the voltage to the motor to reduce inrush current and mechanical stress

    • Variable Frequency Drives (VFDs) control th...

  • Answered by AI
  • Q2. Maintenance documents

Interview Preparation Tips

Interview preparation tips for other job seekers - Pure maintenance electrical and mechanical, with doc knowledge
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What is dol starter
  • Ans. 

    A DOL starter is a Direct-On-Line starter used to start induction motors by directly connecting them to the power supply.

    • DOL starters provide full voltage to the motor during starting.

    • They are simple in design and cost-effective.

    • Commonly used in applications where the motor load is constant and does not require speed control.

    • Example: Starting a water pump motor in a residential building.

  • Answered by AI
  • Q2. Type of moter
  • Ans. 

    There are various types of motors including DC motors, AC motors, stepper motors, and servo motors.

    • DC motors operate on direct current and are commonly used in household appliances and electric vehicles.

    • AC motors operate on alternating current and are used in industrial applications.

    • Stepper motors move in precise increments and are commonly used in 3D printers and CNC machines.

    • Servo motors are controlled by a feedback ...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Type of starter
  • Ans. 

    There are various types of starters used in electrical engineering, such as DOL starter, star-delta starter, and soft starter.

    • Direct On-Line (DOL) starter is the simplest type, providing full voltage to the motor at start.

    • Star-delta starter reduces the starting current by initially connecting the motor in star configuration and then switching to delta.

    • Soft starter gradually increases the voltage to the motor, reducing ...

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 
Round 3 - HR 

(1 Question)

  • Q1. Introduction and previous Job
Round 4 - Technical 

(1 Question)

  • Q1. About Index in Sql and java script related question

Interview Preparation Tips

Interview preparation tips for other job seekers - Depth knowledge of .net and sql.

I applied via Referral and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(10 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. What are your salary expectations?
  • Q3. What is your family background?
  • Q4. Share details of your previous job.
  • Q5. Why should we hire you?
  • Q6. Why are you looking for a change?
  • Q7. Where do you see yourself in 5 years?
  • Q8. Tell me about yourself.
  • Q9. Who is your HR in IFFCO KISHAN CATTELFEAd, do you like him, why
  • Q10. What kind of work he did

Interview Preparation Tips

Interview preparation tips for other job seekers - Complete all formalities from your and company wherever you join before
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. What is bumping clearance in Reciprocating compressor
  • Ans. 

    Bumping clearance in a reciprocating compressor is the minimum distance between the piston and the cylinder head at the top dead center.

    • Bumping clearance is crucial to prevent contact between the piston and the cylinder head during operation.

    • It is necessary to allow for thermal expansion of the components and to avoid damage.

    • Proper bumping clearance ensures efficient operation and prolongs the lifespan of the compresso...

  • Answered by AI
  • Q2. What is mechanical seal
  • Ans. 

    A mechanical seal is a device that helps prevent leakage between two moving or stationary parts in a machine.

    • Used in pumps, compressors, and other rotating equipment

    • Consists of two main parts: stationary seal face and rotating seal face

    • Common types include cartridge seals, component seals, and split seals

  • Answered by AI
  • Q3. Why pressure vessels made in cylindrical shape or spherical shape
  • Ans. 

    Pressure vessels are made in cylindrical or spherical shapes for structural integrity, ease of fabrication, and efficient use of material.

    • Cylindrical shape provides uniform stress distribution and is easier to fabricate compared to other shapes.

    • Spherical shape can withstand higher internal pressure due to uniform stress distribution in all directions.

    • Cylindrical shape is commonly used for horizontal pressure vessels li...

  • Answered by AI
  • Q4. What is basic difference between ASME codes and API codes
  • Ans. 

    ASME codes are primarily used for pressure vessels and piping systems, while API codes are focused on the oil and gas industry.

    • ASME codes are more general and cover a wide range of industries, while API codes are specific to the oil and gas industry.

    • ASME codes are developed by the American Society of Mechanical Engineers, while API codes are developed by the American Petroleum Institute.

    • ASME codes focus on design, cons...

  • Answered by AI
  • Q5. What are the micro alloys elements added to alloy steel
  • Ans. 

    Micro alloy elements added to alloy steel improve strength, toughness, and hardenability.

    • Common micro alloy elements include vanadium, niobium, titanium, and boron.

    • These elements help refine the grain structure of the steel, resulting in improved mechanical properties.

    • Micro alloying also allows for the use of lower carbon content, reducing the risk of cracking during heat treatment.

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Why are you leave current organization
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Brief self Introduction
  • Q2. Work experience and job role in different company
  • Q3. Best achievement in career.
  • Q4. Fundamental and project chemistry
Round 3 - HR 

(2 Questions)

  • Q1. Job summary and expected CTC
  • Q2. Notice period information
Round 4 - Technical 

(1 Question)

  • Q1. Brief discussion with head

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and prepare for best goal achieved during job.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Resoning grammar math

Round 3 - HR 

(3 Questions)

  • Q1. Why should we hire you?
  • Q2. Tell me about yourself.
  • Q3. Where do you see yourself in 5 years?

Interview Preparation Tips

Interview preparation tips for other job seekers - Its really good and we know that iffco company’s also very good
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. What is an invoice?
  • Ans. 

    An invoice is a document issued by a seller to a buyer, detailing the products or services provided and the amount due.

    • An invoice typically includes information such as the seller's contact information, the buyer's contact information, a description of the products or services provided, the quantity, the price, and the total amount due.

    • Invoices are used in business transactions to request payment from the buyer for the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn how to works P2P cycle. And earn some knowledge about invoice processing.

Khaitan Chemicals & Fertilizers Interview FAQs

What are the top questions asked in Khaitan Chemicals & Fertilizers QC Lab Chemist interview?

Some of the top questions asked at the Khaitan Chemicals & Fertilizers QC Lab Chemist interview -

  1. Yas sir there r three type of fertilizers industry ssp urrea ...read more
  2. Sir myself Himanshu Tiwari am from up s...read more
  3. My qualifications is am post gradu...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

PI Industries Interview Questions
4.0
 • 109 Interviews
Rallis India Interview Questions
4.2
 • 39 Interviews
IFFCO Interview Questions
4.1
 • 38 Interviews
FMC Corporation Interview Questions
3.9
 • 34 Interviews
View all

Khaitan Chemicals & Fertilizers QC Lab Chemist Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

3.0

Salary

5.0

Job security

5.0

Company culture

4.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Electrical Engineer
11 salaries
unlock blur

₹2.4 L/yr - ₹4.4 L/yr

Marketing Officer
9 salaries
unlock blur

₹3 L/yr - ₹4.6 L/yr

Shift Incharge
8 salaries
unlock blur

₹2 L/yr - ₹3.5 L/yr

Mechanical Maintenance Engineer
8 salaries
unlock blur

₹2.4 L/yr - ₹4.4 L/yr

Sales Officer
7 salaries
unlock blur

₹2 L/yr - ₹3.1 L/yr

Explore more salaries
Compare Khaitan Chemicals & Fertilizers with

PI Industries

4.0
Compare

Deccan Fine Chemicals

3.7
Compare

Gharda Chemicals Limited

3.9
Compare

Rallis India

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview