Filter interviews by
I appeared for an interview in Apr 2022.
The example absorber outlet temperature and pressure depend on the specific system and operating conditions.
The absorber outlet temperature and pressure are typically measured to ensure proper operation of the system.
For example, in a CO2 capture system, the absorber outlet temperature may be around 40-50°C and the pressure around 10-15 bar.
In a natural gas processing plant, the absorber outlet temperature may be aroun...
Top trending discussions
I applied via Company Website and was interviewed in Mar 2023. There were 3 interview rounds.
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors can be found in various applications such as industrial machinery, household appliances, and vehicles.
There are different types of motors including AC motors, DC motors, and servo motors.
Motors consist of a rotor, stator, and winding components to facilitate the conversion of energy.
Examples of motors include electric fa
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Consists of two coils of wire, known as primary and secondary coils
Primary coil receives electrical energy and creates a magnetic field
Magnetic field induces a voltage in the secondary coil, transferring energy to the secondary circuit
Used to step up or step down voltage levels in electr...
AC and DC motors are types of electric motors used for different applications. AC motors run on alternating current while DC motors run on direct current.
AC motors run on alternating current, which means the direction of current flow changes periodically.
DC motors run on direct current, where the current flows in one direction consistently.
AC motors are commonly used in household appliances, industrial machinery, and H...
posted on 4 Jan 2025
I applied via Company Website
What is your name and education
I have a degree in Electrical Engineering from XYZ University.
Bachelor's degree in Electrical Engineering from XYZ University
Completed coursework in circuits, electronics, and power systems
Hands-on training in electrical installations and repairs
Continuing education in electrical codes and safety regulations
What is your qualification
Any knowledge this job
Do you write an assignment
Do you qualify and good behaviour and respect and good knowledge
I applied via Company Website and was interviewed in Apr 2023. There were 2 interview rounds.
A transformer is an electrical device that changes the voltage and current levels while maintaining the frequency, commonly used for stepping up or stepping down voltage.
Transformers consist of primary and secondary coils wound around a core made of ferromagnetic material.
They work on the principle of electromagnetic induction, where changing current in the primary coil induces a voltage in the secondary coil.
Step-up t...
A motor is an electrical device that converts electrical energy into mechanical energy.
Converts electrical energy to mechanical energy
Used in various applications such as industrial machinery, appliances, vehicles, etc.
Types include AC motors, DC motors, servo motors, etc.
Common examples include electric fans, washing machines, electric vehicles, etc.
There are three main types of motors: AC motors, DC motors, and universal motors.
AC motors run on alternating current and are commonly used in household appliances.
DC motors run on direct current and are often found in battery-operated devices.
Universal motors can run on both AC and DC power sources, making them versatile for various applications.
MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.
MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.
It is commonly used in residential and commercial electrical installations to provide protection to the electrical system and prevent damage to appliances...
A diesel generator (DG) is a type of generator that uses a diesel engine to generate electricity.
DGs are commonly used as backup power sources in case of power outages.
They are also used in remote locations where grid power is not available.
DGs are available in various sizes and capacities to suit different power requirements.
Regular maintenance and fuel supply are essential for the proper functioning of a DG.
Examples ...
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease voltage levels in electrical circuits.
They consist of two coils of wire, known as the primary and secondary coils, wrapped around a core.
Step-up transformers increase voltage levels, while step-down transformers decrease voltage levels.
Transf...
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors are commonly used in various applications such as industrial machinery, household appliances, and vehicles.
There are different types of motors including AC motors, DC motors, and servo motors.
Motors consist of a rotor, stator, and various components such as coils, magnets, and brushes.
Examples of motors include electric
I applied via Company Website and was interviewed in Jul 2021. There was 1 interview round.
posted on 14 Feb 2024
I applied via Company Website and was interviewed in Jan 2024. There was 1 interview round.
Safety is a crucial aspect in engineering to prevent accidents and ensure the well-being of individuals.
Safety protocols should be followed at all times in the workplace
Regular safety inspections and audits should be conducted
Proper training and education on safety procedures is essential
Use of personal protective equipment (PPE) is mandatory in hazardous environments
I applied via Campus Placement and was interviewed before Jun 2022. There were 2 interview rounds.
Relays are electrically operated switches that control high power circuits with low power signals. Types include electromechanical, solid state, and reed relays.
Relays work by using an electromagnet to mechanically switch contacts open or closed.
Types of relays include electromechanical relays, solid state relays, and reed relays.
Electromechanical relays use an electromagnet to operate mechanical contacts.
Solid state r...
A single line diagram is a simplified diagram that shows the electrical connections and components of a power system in a single line.
It is used to represent the electrical system in a simplified manner.
It shows the connections between various components like generators, transformers, circuit breakers, etc.
It helps in understanding the overall layout of the system and how different components are interconnected.
It is c...
based on 1 interview
Interview experience
based on 29 reviews
Rating in categories
Senior Technician
144
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Engineer
53
salaries
| ₹4 L/yr - ₹9 L/yr |
Process Engineer
45
salaries
| ₹4 L/yr - ₹9 L/yr |
Production Engineer
42
salaries
| ₹4 L/yr - ₹10.5 L/yr |
Senior Engineer
39
salaries
| ₹7.4 L/yr - ₹14.1 L/yr |
PI Industries
Deccan Fine Chemicals
Gharda Chemicals Limited
Rallis India