Upload Button Icon Add office photos

Filter interviews by

JW CONSULTANTS LLP Design Engineer Interview Questions and Answers

Updated 23 Feb 2025

JW CONSULTANTS LLP Design Engineer Interview Experiences

4 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via LinkedIn and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

30 min test of RCC aptitude

Round 2 - Assignment 

Design column with axial loading

Interview Preparation Tips

Interview preparation tips for other job seekers - Do RCC revision
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Assignment 

Prepared Etabs model

Round 2 - Technical 

(1 Question)

  • Q1. Is codes 1893, 456, 16700

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. Beam, footing,column ,slab design
  • Q2. Design a footing of particular load and moment
  • Ans. 

    Designing a footing for a specific load and moment involves calculating the required dimensions and reinforcement.

    • Calculate the total load acting on the footing

    • Determine the maximum moment at the base of the footing

    • Select an appropriate footing type based on the soil conditions and load requirements

    • Design the footing dimensions and reinforcement to resist the applied load and moment

    • Consider factors such as soil bearing

  • Answered by AI
  • Q3. Design a beam using lsm method
  • Ans. 

    Design a beam using the lsm method

    • Calculate the loads and support reactions on the beam

    • Determine the type of beam (e.g. simply supported, cantilever)

    • Use the least squares method to analyze the beam's deflection and stress distribution

  • Answered by AI

I applied via LinkedIn and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Indian codal provisions
  • Q2. Design steps for column footing
  • Ans. 

    Design steps for column footing

    • Determine the load and size of the column

    • Calculate the required bearing capacity of the soil

    • Select the appropriate type of footing

    • Design the footing dimensions and reinforcement

    • Prepare the construction drawings and specifications

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with codal provisions for earthquake

JW CONSULTANTS LLP interview questions for designations

 Site Engineer

 (1)

Interview questions from similar companies

I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Geometrical Formula & Measurment Conversation

Interview Preparation Tips

Interview preparation tips for other job seekers - Please check the mathematical formula along with basic Civil engineering qustions before you go for an interview.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the difference between a beam and a slab?
  • Ans. 

    A beam is a horizontal or inclined structural member that carries loads perpendicular to its longitudinal axis, while a slab is a flat, horizontal structural element that is typically used in floors and roofs.

    • Beams are used to support vertical loads, while slabs are used to support horizontal loads.

    • Beams are typically deeper than they are wide, while slabs are typically wider than they are deep.

    • Beams are often used in ...

  • Answered by AI
  • Q2. Draw the SFD and BMD for an overhanging beam?
  • Ans. 

    SFD and BMD for an overhanging beam

    • Determine the reactions at the supports

    • Draw the SFD by taking sections and finding the net force

    • Draw the BMD by taking sections and finding the net moment

    • Account for any point loads or moments

    • Check for equilibrium at each section

  • Answered by AI
  • Q3. What are the design steps for a Column?
  • Ans. 

    Design steps for a column include determining load requirements, selecting materials, calculating dimensions, and creating a detailed drawing.

    • Determine load requirements based on the intended use of the column

    • Select appropriate materials based on load requirements and aesthetic preferences

    • Calculate dimensions of the column based on load requirements and material properties

    • Create a detailed drawing of the column design,...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Revision design concepts and basic structural engineering concepts.

I applied via Campus Placement and was interviewed before Aug 2020. There were 7 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Normal coading questions, and then apptitude questions which they had in the 1st apptitude round

Interview Preparation Tips

Interview preparation tips for other job seekers - Easy interview but a very tedious and long process

I applied via Naukri.com and was interviewed in Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Coding Test 

Asking Questions related to their profile and work

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident what you say and reply when you know all about that topic.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Apna Jobs and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Basic skills and about genral knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Waste Company your zone managers will make work like a dog 360 days you will not have holiday you get holiday after project is over you have start work early in morning 7 and work till midnight 2or 3 this job is waste of time better do another jobs

I applied via Company Website and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Firstly They have asked me to introduce myself and further, they questions from manly 3 section from my resume
  • Q2. OOPS 1: Difference between Method overloading and method overriding 2: What is inheritance and it's benifits 3: Define encapsulation and Abstraction.
  • Ans. 

    Questions related to OOPS concepts in software engineering.

    • Method overloading is having multiple methods with the same name but different parameters, while method overriding is having a method in a subclass with the same name and parameters as a method in its superclass.

    • Inheritance is the ability of a class to inherit properties and methods from its parent class. It allows for code reuse and promotes modularity.

    • Encapsu...

  • Answered by AI
  • Q3. SQL 1: Difference between primary key and unique key 2: Why we use Normalisation and there different types 3: Some questions from SQL query, Join, delete, update, etc.
  • Ans. 

    Answers to SQL related questions for Software Engineer interview

    • Primary key uniquely identifies a record in a table, while unique key ensures that no two records have the same value for a specific column

    • Normalization is used to eliminate data redundancy and improve data integrity. Types include 1NF, 2NF, 3NF, BCNF, 4NF, 5NF

    • SQL queries can be used to retrieve data from one or more tables using joins. Delete and update s

  • Answered by AI
  • Q4. Aptitude 1: One question from number series

Interview Preparation Tips

Interview preparation tips for other job seekers - If you're going for the interview process for Milliman just well prepared all the above mentioned points, last but not least be genuine about your project

Skills evaluated in this interview

JW CONSULTANTS LLP Interview FAQs

How many rounds are there in JW CONSULTANTS LLP Design Engineer interview?
JW CONSULTANTS LLP interview process usually has 1-2 rounds. The most common rounds in the JW CONSULTANTS LLP interview process are Technical, Assignment and Aptitude Test.
How to prepare for JW CONSULTANTS LLP Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at JW CONSULTANTS LLP. The most common topics and skills that interviewers at JW CONSULTANTS LLP expect are Design Engineering.
What are the top questions asked in JW CONSULTANTS LLP Design Engineer interview?

Some of the top questions asked at the JW CONSULTANTS LLP Design Engineer interview -

  1. Design steps for column foot...read more
  2. Design a footing of particular load and mom...read more
  3. Design a beam using lsm met...read more

Tell us how to improve this page.

JW CONSULTANTS LLP Design Engineer Interview Process

based on 4 interviews

Interview experience

3.8
  
Good
View more

Interview Questions from Similar Companies

Indus Insights Interview Questions
2.4
 • 25 Interviews
Milliman Interview Questions
3.8
 • 20 Interviews
Dhruv Research Interview Questions
3.2
 • 12 Interviews
Lodha & Company Interview Questions
3.1
 • 11 Interviews
View all
JW CONSULTANTS LLP Design Engineer Salary
based on 60 salaries
₹3 L/yr - ₹6.3 L/yr
18% less than the average Design Engineer Salary in India
View more details

JW CONSULTANTS LLP Design Engineer Reviews and Ratings

based on 5 reviews

3.1/5

Rating in categories

3.1

Skill development

2.8

Work-life balance

2.1

Salary

3.3

Job security

2.5

Company culture

1.9

Promotions

2.5

Work satisfaction

Explore 5 Reviews and Ratings
Design Engineer
60 salaries
unlock blur

₹3 L/yr - ₹6.2 L/yr

Structural Design Engineer
59 salaries
unlock blur

₹2.5 L/yr - ₹6 L/yr

Structural Engineer
30 salaries
unlock blur

₹3.2 L/yr - ₹7.3 L/yr

Graduate Engineer
16 salaries
unlock blur

₹3.5 L/yr - ₹4.2 L/yr

Structural Draftsman
11 salaries
unlock blur

₹2.4 L/yr - ₹3.6 L/yr

Explore more salaries
Compare JW CONSULTANTS LLP with

Dhruv Research

3.2
Compare

S.M. Consultants

3.4
Compare

Cheers Interactive

3.5
Compare

Milliman

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview