Upload Button Icon Add office photos

Filter interviews by

IND-SPHINX PRECISION Interview Questions, Process, and Tips

Updated 25 Jun 2024

Top IND-SPHINX PRECISION Interview Questions and Answers

IND-SPHINX PRECISION Interview Experiences

Popular Designations

5 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Better identification of skills and interests

Round 2 - Technical 

(2 Questions)

  • Q1. How many microns are there in 1 mm
  • Ans. 

    There are 1000 microns in 1 mm.

    • 1 mm is equal to 1000 microns

    • Micron is a unit of length equal to one millionth of a meter

    • Commonly used in microscopy and manufacturing industries

  • Answered by AI
  • Q2. What are measuring instrument and how many measuring instrument
  • Ans. 

    Measuring instruments are tools used to quantify physical quantities. There are various types of measuring instruments for different purposes.

    • Measuring instruments are tools used to quantify physical quantities such as length, weight, temperature, etc.

    • Common measuring instruments include rulers, thermometers, weighing scales, voltmeters, etc.

    • There are specialized measuring instruments for specific fields like medical i...

  • Answered by AI

Internship Trainee Interview Questions asked at other Companies

Q1. Tell about your UG project? How will you design a table for 1 tonne load and what are all the consideration needed for it? Tell the Equations you know in strength of Materials? What are manufacturing processes involved to fabricate ball bea... read more
View answer (1)
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. About grinding process

Diploma Engineer Interview Questions asked at other Companies

Q1. What working principle of MPI and Auto UT and Manual UT m/c and final inspection line where gauge yor are used????
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical any questions etc
  • Q2. Micron reading drawing read etc
Round 3 - Presentation 

(1 Question)

  • Q1. Smart work skilled and good learn r

Interview Preparation Tips

Interview preparation tips for other job seekers - I am akshay 6 year experience in 26 age cnc rollomatic mc

CNC Machine Operator Interview Questions asked at other Companies

Q1. do you know Numerical Calculations like conversation of mm into microns.
View answer (4)
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Basic about math english physics

Round 3 - Technical 

(2 Questions)

  • Q1. Cutting tool material drill angle
  • Ans. 

    Cutting tool material and drill angle are important factors for efficient machining.

    • The cutting tool material should be selected based on the workpiece material and the machining operation.

    • High-speed steel (HSS) is commonly used for drilling operations, while carbide is preferred for high-speed machining.

    • The drill angle affects the cutting action and chip formation. A larger drill angle results in a more aggressive cut...

  • Answered by AI
  • Q2. Autocad knowledge should be considered

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident and realistic. Choose your words wisely

Diploma Mechanical Engineer Interview Questions asked at other Companies

Q1. What is the second law of thermodynamics?
View answer (14)

IND-SPHINX PRECISION interview questions for popular designations

 Diploma Engineer

 (2)

 CNC Machine Operator

 (1)

 Diploma Mechanical Engineer

 (1)

 Internship Trainee

 (1)

I applied via Referral and was interviewed in Oct 2018. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. Reason for leaving previous employer
  • Q2. Salary expected
  • Q3. Introduction
  • Q4. Type of measuring instruments,their least count etc
  • Ans. 

    Measuring instruments are tools used to measure physical quantities. Their least count is the smallest measurement that can be made.

    • Common measuring instruments include rulers, calipers, micrometers, and thermometers.

    • Least count is determined by the smallest division on the instrument's scale.

    • For example, a ruler with a smallest division of 1 mm has a least count of 1 mm.

    • A micrometer with a smallest division of 0.01 mm...

  • Answered by AI
  • Q5. Work done in previous company
  • Q6. Challenges in previous company

Interview Preparation Tips

General Tips: Be confident, real and a person with strong attitude.

Skills: Communication, Body Language, Analytical Skills
Duration: 1-4 weeks

Diploma Engineer Interview Questions asked at other Companies

Q1. What working principle of MPI and Auto UT and Manual UT m/c and final inspection line where gauge yor are used????
View answer (1)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Nov 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Wind calculation as per IS code
  • Ans. 

    The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.

    • Determine the design wind speed based on the location and height of the structure.

    • Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

    • Calculate the wind pressure using the formula provided in the IS code.

    • Consider fa...

  • Answered by AI
  • Q2. SFD and BMD of cantilever beam
  • Q3. Staad model for fixed pole
  • Ans. 

    A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.

    • In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

    • The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

    • The analysis helps in determining the s...

  • Answered by AI
  • Q4. Design of Square base plate
  • Ans. 

    Key considerations in designing a square base plate

    • Ensure the base plate is large enough to support the load without excessive deflection

    • Select appropriate material and thickness to meet structural requirements

    • Consider the connection details for attaching the base plate to the structure

    • Account for any potential corrosion or environmental factors that may affect the base plate

    • Include provisions for anchor bolts or other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare wind calculation & Steel design
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Witch type transformer use in elevator?
  • Q2. Difference in open loop or close loop
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the value of CPK
  • Ans. 

    CPK is a statistical measure used to assess the capability of a process to produce output within specification limits.

    • CPK is calculated using the formula: CPK = (USL - LSL) / (6 * standard deviation)

    • A CPK value greater than 1 indicates that the process is capable of producing within specification limits

    • A CPK value less than 1 indicates that the process may not be capable of consistently producing within specification l

  • Answered by AI
  • Q2. What is Ra in roughnes tester
  • Ans. 

    Ra in roughness tester is the average roughness value of the surface profile within a specified sampling length.

    • Ra is a parameter used to quantify the roughness of a surface.

    • It is calculated as the arithmetic average of the absolute values of the profile heights over the evaluation length.

    • Ra provides a measure of the deviation of the surface profile from the mean line.

    • It is commonly used in industries such as manufactu...

  • Answered by AI
  • Q3. What is 7Qc tool and how you used it in daily routine?
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.

    • Check sheets: Used to collect and analyze data in a systematic way.

    • Histograms: Used to show frequency distribution of a process.

    • Pareto charts: Helps identify the most significant factors contributing to a problem.

    • Cause-and-effect diagrams: Used to identify and analyze potential causes of a problem.

    • Scatter...

  • Answered by AI
  • Q4. 8D methodology and projects on it
  • Ans. 

    The 8D methodology is a problem-solving approach used in quality management to identify, correct, and prevent recurring problems.

    • The 8D methodology consists of 8 steps: D0 - Plan, D1 - Team Formation, D2 - Problem Description, D3 - Interim Containment Action, D4 - Root Cause Analysis, D5 - Permanent Corrective Action, D6 - Prevent Recurrence, D7 - Recognize Team Effort, D8 - Closure and Team Disbandment

    • It is commonly u...

  • Answered by AI
  • Q5. Previous working related
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Manufacturing department
  • Q2. Manpower handle
  • Q3. Daily target production

Interview Preparation Tips

Interview preparation tips for other job seekers - I am interested
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How does a CNC machine works?
  • Ans. 

    A CNC machine works by using computer programs to control the movement of the machine's tools and workpiece to create precision parts.

    • CNC machines use computer programs to control the movement of the cutting tools and workpiece.

    • The programs are created using CAD/CAM software and converted into G-code instructions.

    • The machine reads the G-code instructions and moves the tools along the specified paths to cut and shape th...

  • Answered by AI

IND-SPHINX PRECISION Interview FAQs

How many rounds are there in IND-SPHINX PRECISION interview?
IND-SPHINX PRECISION interview process usually has 2-3 rounds. The most common rounds in the IND-SPHINX PRECISION interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for IND-SPHINX PRECISION interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at IND-SPHINX PRECISION. The most common topics and skills that interviewers at IND-SPHINX PRECISION expect are Business Development, Advance License, Application Support, CNC Programming and DGFT.
What are the top questions asked in IND-SPHINX PRECISION interview?

Some of the top questions asked at the IND-SPHINX PRECISION interview -

  1. Type of measuring instruments,their least count ...read more
  2. What are measuring instrument and how many measuring instrum...read more
  3. how many microns are there in 1...read more

Tell us how to improve this page.

People are getting interviews through

based on 3 IND-SPHINX PRECISION interviews
Referral
Job Portal
33%
33%
34% candidates got the interview through other sources.
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.1k Interviews
Infosys Interview Questions
3.7
 • 7.4k Interviews
HDFC Bank Interview Questions
3.9
 • 2.1k Interviews
Maruti Suzuki Interview Questions
4.2
 • 578 Interviews
Bajaj Auto Interview Questions
3.9
 • 268 Interviews
Titan Company Interview Questions
4.3
 • 141 Interviews
Bharat Forge Interview Questions
3.8
 • 54 Interviews
View all

IND-SPHINX PRECISION Reviews and Ratings

based on 88 reviews

4.0/5

Rating in categories

3.7

Skill development

3.6

Work-Life balance

3.6

Salary & Benefits

4.0

Job Security

3.8

Company culture

3.4

Promotions/Appraisal

3.4

Work Satisfaction

Explore 88 Reviews and Ratings
Diploma Engineer
32 salaries
unlock blur

₹2 L/yr - ₹3.5 L/yr

Diploma Mechanical Engineer
25 salaries
unlock blur

₹1.4 L/yr - ₹3.4 L/yr

Senior Engineer
16 salaries
unlock blur

₹2.8 L/yr - ₹7.8 L/yr

Engineer
11 salaries
unlock blur

₹2.4 L/yr - ₹4.7 L/yr

Production Engineer
10 salaries
unlock blur

₹2.9 L/yr - ₹6 L/yr

Explore more salaries
Compare IND-SPHINX PRECISION with

Bharat Forge

3.8
Compare

TCS

3.7
Compare

Reliance Industries

4.1
Compare

Infosys

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview