Upload Button Icon Add office photos

Filter interviews by

Expertise Contracting Company Workshop Supervisor Interview Questions, Process, and Tips

Updated 7 Jan 2024

Expertise Contracting Company Workshop Supervisor Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(16 Questions)

  • Q1. Different Between CDTP and Set Pressure.
  • Ans. 

    CDTP is the Closing Differential Test Pressure, while Set Pressure is the pressure at which a safety valve opens.

    • CDTP is the pressure difference between the set pressure and the closing pressure of a safety valve.

    • Set Pressure is the pressure at which a safety valve opens to release excess pressure.

    • CDTP ensures the safety valve closes properly after relieving pressure, while Set Pressure determines when the valve opens.

    • ...

  • Answered by AI
  • Q2. Different Between conventional and Bellow Valve
  • Ans. 

    Conventional valves have a linear motion while bellows valves have a flexible bellows element for sealing.

    • Conventional valves have a linear motion to open and close, while bellows valves use a flexible bellows element for sealing.

    • Bellows valves are typically used in applications where leakage prevention is critical, such as in high-pressure or vacuum systems.

    • Conventional valves are simpler in design and operation compa...

  • Answered by AI
  • Q3. What is gasket .
  • Ans. 

    A gasket is a mechanical seal that fills the space between two mating surfaces to prevent leakage.

    • Gaskets are commonly used in engines to prevent fluids from leaking out.

    • They can be made from materials such as rubber, silicone, metal, or paper.

    • Gaskets are often used in plumbing systems to create a watertight seal.

    • They come in various shapes and sizes to fit different applications.

  • Answered by AI
  • Q4. Why flang use in Valve Shop.
  • Ans. 

    Flanges are used in valve shops to connect valves to pipes securely and efficiently.

    • Flanges provide a leak-tight connection between valves and pipes

    • They allow for easy assembly and disassembly of valves for maintenance or replacement

    • Flanges come in various types such as weld neck, slip-on, and threaded flanges

    • They help in aligning and supporting the valve properly in the piping system

  • Answered by AI
  • Q5. What is ASME/ASNI Code of Gasket.
  • Ans. 

    ASME/ANSI Code of Gasket refers to the standards set by the American Society of Mechanical Engineers and the American National Standards Institute for gaskets used in various industrial applications.

    • ASME/ANSI Code of Gasket provides guidelines for the design, materials, dimensions, and performance of gaskets.

    • These codes ensure that gaskets meet certain quality and safety standards for use in pressure vessels, piping sy...

  • Answered by AI
  • Q6. What is ASME/ANSI Code Flang.
  • Ans. 

    ASME/ANSI Code Flanges are standardized flanges used in piping systems to ensure compatibility and safety.

    • ASME/ANSI Code Flanges are designed to specific dimensions and pressure ratings to ensure compatibility with pipes and valves.

    • They are commonly used in industries such as oil and gas, chemical, and power generation.

    • ASME B16.5 is a widely used standard for ASME/ANSI Code Flanges.

    • These flanges are marked with a press...

  • Answered by AI
  • Q7. How much standard Back pressure in Bellow Valve .
  • Ans. 

    Standard back pressure in bellow valve is typically around 10-15 psi.

    • Standard back pressure in bellow valve is usually around 10-15 psi.

    • Back pressure helps to maintain a seal in the valve and prevent leakage.

    • Excessive back pressure can cause the valve to malfunction or fail.

    • Back pressure can vary depending on the specific application and type of bellow valve.

    • It is important to follow manufacturer guidelines for back pr

  • Answered by AI
  • Q8. What is mean parts of Control Valves
  • Ans. 

    Control valves are essential components in regulating fluid flow in a system.

    • Control valves regulate flow rate, pressure, temperature, and liquid level in a system.

    • They consist of a valve body, actuator, and positioner.

    • Common types include globe valves, butterfly valves, and ball valves.

    • Control valves are used in industries such as oil and gas, chemical, and water treatment.

  • Answered by AI
  • Q9. What is a Mechanical valve Testing Standard.
  • Ans. 

    A mechanical valve testing standard is a set of guidelines and procedures used to ensure the quality and performance of mechanical valves used in various industries.

    • Mechanical valve testing standards outline the requirements for design, materials, manufacturing, and performance testing of mechanical valves.

    • These standards help ensure that mechanical valves meet safety, reliability, and performance criteria.

    • Examples of ...

  • Answered by AI
  • Q10. Types of gate valve
  • Ans. 

    Gate valves are used to control the flow of fluid in a pipeline by opening and closing a gate.

    • Gate valves are primarily used for on/off control of flow.

    • They are not suitable for regulating flow due to their design.

    • Common types include wedge gate valves, parallel gate valves, and knife gate valves.

    • Gate valves can be classified based on the type of gate, such as solid wedge, flexible wedge, split wedge, and parallel slid...

  • Answered by AI
  • Q11. Types of globe valve
  • Ans. 

    Globe valves are used to regulate flow in a pipeline by raising or lowering a disc to control the flow of fluid.

    • Globe valves have a spherical body with an internal baffle and a movable plug (disc) to control flow.

    • They are commonly used in applications where throttling or frequent operation is required.

    • Types of globe valves include angle globe valves, straight globe valves, and Y-pattern globe valves.

    • Materials used for ...

  • Answered by AI
  • Q12. Types of ball valve
  • Ans. 

    Ball valves are a type of quarter-turn valve that uses a hollow, perforated, and pivoting ball to control flow through it.

    • Ball valves are categorized based on the number of ports they have: 2-way, 3-way, or 4-way.

    • They can also be classified based on the type of ball used: floating ball valve, trunnion ball valve, or V-port ball valve.

    • Materials used for ball valves include stainless steel, brass, bronze, PVC, and carbon...

  • Answered by AI
  • Q13. What is a pressure gauge Testing Standard.
  • Ans. 

    A pressure gauge Testing Standard is a set of guidelines and criteria used to ensure the accuracy and reliability of pressure gauges.

    • Pressure gauge Testing Standards specify the methods and procedures for testing pressure gauges.

    • They outline the acceptable levels of accuracy and reliability that pressure gauges must meet.

    • Pressure gauge Testing Standards may include calibration procedures, testing equipment requirements...

  • Answered by AI
  • Q14. What is a Body Joint gasket Thikness.
  • Ans. 

    Body joint gasket thickness refers to the measurement of the gasket material used to seal the joint between two components.

    • Body joint gasket thickness is crucial for ensuring a proper seal and preventing leaks.

    • The thickness of the gasket material can vary depending on the specific application and requirements.

    • Common thicknesses for body joint gaskets range from 0.5mm to 5mm.

    • Proper installation and torque of the fastene...

  • Answered by AI
  • Q15. Types of flang Face
  • Ans. 

    Types of flange faces include raised face, flat face, ring-type joint, and tongue and groove.

    • Raised face: a small portion around the bore is raised above the bolting circle for gasket seating

    • Flat face: the flange face is flat and does not have any protrusions

    • Ring-type joint: a metal ring is used to create a seal between two flanges

    • Tongue and groove: one flange has a raised ring while the other has a matching depression

  • Answered by AI
  • Q16. Types of Gasket
  • Ans. 

    Types of gaskets include spiral wound, ring joint, sheet, and solid metal.

    • Spiral wound gaskets are made of a V-shaped metal strip and a filler material.

    • Ring joint gaskets are used in high pressure and high temperature applications.

    • Sheet gaskets are cut from sheets of materials like rubber, cork, or paper.

    • Solid metal gaskets are made of a single piece of metal with no filler material.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I have Good Experience in Mechanical Valves Work shop.

Interview questions from similar companies

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions will be related to the post which company is offering.
  • Q2. Should be very accurate to all electronics queries

Interview Preparation Tips

Interview preparation tips for other job seekers - Be smart and to the point answers will help.

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. CNC programming

Interview Preparation Tips

Interview preparation tips for other job seekers - Be very technical
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is your experiencce
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview before Jun 2021.

Round 1 - Technical 

(2 Questions)

  • Q1. Input output list the digital and analog signals from field instruments to control room via the single core and multicore cables via the junction boxes.
  • Q2. What is dca an# plc
  • Ans. 

    DCA and PLC are commonly used acronyms in the field of engineering.

    • DCA stands for Direct Current Amplifier, which is a device used to amplify direct current signals.

    • PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.

    • DCA and PLC are essential components in various engineering applications such as industrial automation and control systems.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn hard and work hard

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Based on the experiences and technical information provided in resume
  • Q2. Based on the standards mentioned in resume regarding oil and gas

Interview Preparation Tips

Interview preparation tips for other job seekers - Technipfmc is a one of good company to join , it will be tough for one who is good at work.

Expertise Contracting Company Interview FAQs

How many rounds are there in Expertise Contracting Company Workshop Supervisor interview?
Expertise Contracting Company interview process usually has 1 rounds. The most common rounds in the Expertise Contracting Company interview process are Technical.
What are the top questions asked in Expertise Contracting Company Workshop Supervisor interview?

Some of the top questions asked at the Expertise Contracting Company Workshop Supervisor interview -

  1. How much standard Back pressure in Bellow Valv...read more
  2. What is a Mechanical valve Testing Standa...read more
  3. What is a pressure gauge Testing Standa...read more

Tell us how to improve this page.

Expertise Contracting Company Workshop Supervisor Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 260 Interviews
ABB Interview Questions
4.1
 • 242 Interviews
John Deere Interview Questions
4.1
 • 235 Interviews
Cummins Interview Questions
4.3
 • 233 Interviews
Caterpillar Inc Interview Questions
4.2
 • 178 Interviews
KONE Interview Questions
4.1
 • 104 Interviews
Atlas Copco Interview Questions
4.2
 • 79 Interviews
TechnipFMC Interview Questions
4.0
 • 73 Interviews
TÜV SÜD Interview Questions
3.9
 • 65 Interviews
Hilti Interview Questions
3.4
 • 61 Interviews
View all

Expertise Contracting Company Workshop Supervisor Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Safety Officer
35 salaries
unlock blur

₹2.9 L/yr - ₹11 L/yr

Planning Engineer
26 salaries
unlock blur

₹5 L/yr - ₹14.4 L/yr

Mechanical Supervisor
25 salaries
unlock blur

₹6 L/yr - ₹15 L/yr

Mechanical Engineer
23 salaries
unlock blur

₹4 L/yr - ₹14 L/yr

Project Engineer
14 salaries
unlock blur

₹6 L/yr - ₹15 L/yr

Explore more salaries
Compare Expertise Contracting Company with

John Deere

4.1
Compare

Thermax Limited

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview