Filter interviews by
Performance of working tools and parts
Different types of scale used in mechanical maintenance include linear scale, vernier scale, micrometer scale, etc.
Linear scale is used for measuring length or distance
Vernier scale is used for more precise measurements
Micrometer scale is used for measuring very small distances
Dial scale is used for measuring weight or force
Digital scale is used for accurate and easy readings
Top trending discussions
I applied via Newspaper Ad and was interviewed before Apr 2021. There were 3 interview rounds.
Hard work versus smart work.
The power plug earth wire is bigger in size to ensure safety and prevent electrical shocks.
The earth wire provides a path for the current to flow in case of a fault or short circuit.
A larger wire size reduces resistance and allows for the safe dissipation of excess current.
It helps to protect individuals and equipment from electric shock hazards.
The earth wire is connected to the ground, which acts as a reference point...
Copper (Cu) conductor will take larger current than Aluminum (Al) conductor of the same size.
Copper has a higher electrical conductivity than Aluminum.
Copper has a lower resistivity than Aluminum.
Copper has better thermal conductivity than Aluminum.
Copper is more commonly used in high-current applications.
Aluminum is often used in overhead power transmission lines due to its lighter weight.
Pulse width modulation (PWM) is a technique used in VFD to control the speed of the motor by adjusting the width of the pulses of voltage supplied to the motor.
PWM is a method of controlling the amount of power delivered to a load without changing the voltage level.
In VFD, PWM is used to control the speed of the motor by varying the width of the pulses of voltage supplied to the motor.
The width of the pulses is control...
posted on 1 Sep 2024
I appeared for an interview in Mar 2024.
posted on 20 Oct 2023
F.left hand theorem states that the magnetic field around a current-carrying conductor can be determined using the left hand rule.
States that if the thumb, forefinger, and middle finger of the left hand are extended at right angles to each other, with the forefinger pointing in the direction of the current, the thumb in the direction of the magnetic field, then the middle finger points in the direction of the force exp...
Hydraulics is a branch of engineering that focuses on the mechanical properties of liquids.
Hydraulics deals with the transmission of force through the use of liquids.
It involves the study of fluid dynamics and how fluids behave under pressure.
Hydraulic systems are commonly used in various applications such as heavy machinery, aircraft control systems, and automotive brakes.
I applied via Newspaper Ad and was interviewed in Jun 2023. There were 2 interview rounds.
posted on 8 Aug 2024
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
posted on 12 Jun 2024
I applied via Company Website and was interviewed in May 2024. There were 3 interview rounds.
What is your education
My technical ITI is in Mechanical Engineering.
Completed ITI in Mechanical Engineering
Specialized in areas such as machine tools, welding, and hydraulics
Hands-on training in troubleshooting and maintenance of mechanical systems
I appeared for an interview in Sep 2024.
I applied via Campus Placement
FRL stands for Filter, Regulator, Lubricator and Enumati is not a recognized term in the maintenance field.
FRL is a combination of components used in pneumatic systems to filter, regulate pressure, and lubricate the air supply.
Examples of FRL components include air filters to remove contaminants, regulators to control pressure, and lubricators to add oil to the air.
Enumati does not have a known meaning or usage in main
There are various types of bearings used in machinery, such as ball bearings, roller bearings, and plain bearings.
Ball bearings use balls to reduce friction between two surfaces, commonly found in wheels and pulleys.
Roller bearings use cylindrical rollers to reduce friction, commonly found in conveyor belts and gearboxes.
Plain bearings have a simple design with a sliding surface, commonly found in hinges and bushings.
Fill offjob is a term used in maintenance to classify tasks that are completed outside of regular working hours.
Fill offjob tasks are typically scheduled during weekends or holidays to minimize disruption to regular operations.
Examples of fill offjob tasks include major equipment repairs, facility upgrades, and preventive maintenance activities.
Maintenance fitters may be required to work on fill offjob tasks to ensure ...
The count of varniar calipat is not a standard term in the maintenance fitter field.
There is no standard definition or reference for varniar calipat in maintenance fitting.
It is possible that the term is specific to a certain company or industry, in which case the count would depend on their specific requirements.
It would be best to ask for clarification on the term or context in which it is being used.
Calcification of fill refers to the accumulation of calcium deposits in a filling material.
Calcification of fill can occur in dental fillings, causing them to harden and potentially crack over time.
This process can also occur in industrial settings, such as in pipelines where calcium deposits build up and restrict flow.
Preventative measures such as regular cleaning and maintenance can help reduce the risk of calcificat
The count of bore gauges refers to the number of bore gauges available for use in maintenance tasks.
Check the inventory records for the number of bore gauges on hand
Count the physical bore gauges in the maintenance department
Consult with colleagues or supervisors to confirm the count
Ensure all bore gauges are accounted for and in working condition
I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.
based on 1 interview
Interview experience
Mining Engineer
13
salaries
| ₹0.9 L/yr - ₹3.5 L/yr |
Internal Auditor
10
salaries
| ₹0.8 L/yr - ₹4.5 L/yr |
Mining Engineer Trainee
7
salaries
| ₹0.9 L/yr - ₹2.5 L/yr |
Apprenticeship Trainee
6
salaries
| ₹0.9 L/yr - ₹2.6 L/yr |
Overman
5
salaries
| ₹2 L/yr - ₹11 L/yr |
Hindalco Industries
Rungta Mines
Hindustan Zinc
Vedanta Aluminium