Upload Button Icon Add office photos

Filter interviews by

DMI DRAEXLMAIER MANUFACTURING Diploma Trainee Engineer Interview Questions and Answers

Updated 8 Aug 2022

DMI DRAEXLMAIER MANUFACTURING Diploma Trainee Engineer Interview Experiences

1 interview found

Round 1 - Technical 

(1 Question)

  • Q1. What do you mean by electrical electric current
  • Ans. 

    Electric current is the flow of electric charge in a conductor.

    • Electric current is the rate of flow of electric charge.

    • It is measured in units of amperes (A).

    • Electric current can be either direct current (DC) or alternating current (AC).

    • DC flows in one direction while AC periodically changes direction.

    • Examples of electric current include the flow of electrons in a wire and the movement of ions in an electrolyte solutio

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Siddhanath Gaikwad completed my diploma . 1 year experience electrician

Interview questions from similar companies

I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. 1. What is ohm's Law
  • Ans. 

    Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance.

    • Ohm's Law is expressed as V = IR, where V is the voltage, I is the current, and R is the resistance.

    • It helps in understanding the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if the voltage is increased while t...

  • Answered by AI
  • Q2. What is Linux Os
  • Ans. 

    Linux OS is an open-source operating system based on the Unix kernel.

    • Linux OS is known for its stability, security, and flexibility.

    • It is widely used in servers, embedded systems, and mobile devices.

    • Examples of popular Linux distributions include Ubuntu, Fedora, and CentOS.

  • Answered by AI
  • Q3. Full form of CCD/TI Camera
  • Ans. 

    CCD stands for Charge-Coupled Device and TI Camera stands for Texas Instruments Camera.

    • CCD is a type of image sensor used in digital cameras and video cameras.

    • TI Camera refers to cameras developed by Texas Instruments, a technology company.

    • CCD/TI Cameras are commonly used in various applications such as surveillance, photography, and scientific imaging.

    • CCD/TI Cameras convert light into electrical signals for capturing ...

  • Answered by AI
  • Q4. Whic command use for make directory in Linux system
  • Ans. 

    The command used to make a directory in Linux is 'mkdir'.

    • The 'mkdir' command is used to create a new directory in Linux.

    • It can be used with various options to set permissions, create multiple directories, etc.

    • For example, 'mkdir directory_name' creates a new directory with the specified name.

    • To create multiple directories at once, use 'mkdir dir1 dir2 dir3'.

    • To create directories with specific permissions, use 'mkdir -m

  • Answered by AI
  • Q5. Which Service use for local server in parrot os
  • Ans. 

    The service used for local server in Parrot OS is Apache.

    • Apache is a popular open-source web server software.

    • It is widely used for hosting websites and serving web content.

    • Apache provides a robust and secure environment for running web applications.

    • It supports various features like virtual hosting, SSL/TLS encryption, and URL rewriting.

    • Parrot OS includes Apache as the default web server for local development.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Practice and repeat,be on time,

Skills evaluated in this interview

Senior Engineer Interview Questions & Answers

KONE user image Murali Krishnan

posted on 19 Mar 2025

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. Could you please share your experiences?
  • Ans. 

    Experienced Senior Engineer with a strong background in software development, project management, and team leadership.

    • Led a team of 10 engineers in developing a scalable web application, improving performance by 30%.

    • Implemented Agile methodologies, resulting in a 25% increase in project delivery speed.

    • Designed and optimized database systems, reducing query response time by 40%.

    • Mentored junior engineers, fostering a col...

  • Answered by AI
  • Q2. Why should Kone hire you?
  • Ans. 

    I bring extensive engineering experience, innovative problem-solving skills, and a passion for enhancing urban mobility solutions.

    • Proven track record in designing and implementing advanced elevator systems, improving efficiency by 20%.

    • Strong collaboration skills demonstrated through successful cross-functional projects, leading to a 15% reduction in project timelines.

    • Expertise in utilizing data analytics to optimize ma...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Case based question

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - One-on-one 

(4 Questions)

  • Q1. About company details,About company culture,about mechanical questions
  • Q2. Company details,about studies mechanical About company maintenance
  • Q3. About my self,About company employee
  • Q4. About company maintenance ATO CAD testing area

Interview Preparation Tips

Topics to prepare for Hitachi Production Engineer interview:
  • roustabout activities
  • About company details
Interview preparation tips for other job seekers - Production maintenance ATO CAD

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: Not very transparent and highly delayed.
Tips: Can indicate selection status immediately or within one day of announcement. One sentence describing reason for rejection or acceptance can be given.

Round: Test
Experience: N/A
Tips: N/A

General Tips: Please let us know in case of rejection or waiting list, we have to apply to other companies as well to secure an intern and a simple sentence on reason for rejection will be very helpful.
Skills: Python, Simulink, MATLAB
Duration: 1.5
College Name: IIT Madras
Motivation: Internationally reputed, Core mechanical company designing heavy machinery.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had mentioned my extra-curricular activities in my resume in a detailed and organised manner (all listed in a chronological order). Most of these were techno-managerial activities (organizational responsibilities in my tech fest). I had participated in an event called Robocon which added a new dimension to me resume. I had done a project and a couple of internships during my four years of study – I mentioned the details of these in my resume. Although the resume that we submitted was in a standard format as per the norms of our placement cell, I referred to a website of Princeton University to prepare my resume. It’s a very good website and hugely referred by students for preparing their resume. I also got some valuable insights from my seniors for building my resume. I laid stress on my achievements related to the technical field, because I wanted to land a job in my core field of study.

Round: Test
Experience: The first round was the written test. The paper consisted of questions from general aptitude, technical ability and verbal ability. The paper was slightly lengthy and required a bit more stress on speed while maintaining the accuracy. The verbal ability part was easy; if a person had prepared for CAT, then he would not have found the paper difficult. The difficulty level of general aptitude questions was at par with the verbal ability questions. The technical questions were however slightly more difficult as compared to the other two. To answer these questions required a fair amount of knowledge on topics like ‘General Mechanics’, ‘Fluid Mechanics’, ‘Machining’ and ‘Solid Mechanics’. Some questions from ‘Thermodynamics’ were also asked. The total duration of the test was 90 minutes and the number of questions was 60. The test only had objective questions.
Duration: 90 minutes
Total Questions: 60

Round: HR Interview
Experience: The next round was the personal interview round. I had my interview the very next morning. The very first question the interviewers asked was related to me as person – my schooling, my family background and my four years of college life. The interviewer then did a review of my resume and picked some points and then questioned me on that. He also asked me about my areas of interest. I told them that I had cultivated a lot of interest in ‘Machine Design’. I showed them some pictures of the Robocon event that I had participated in, which quite impressed them. I was then asked to design the chair that I was sitting on considering all the different design aspects. I designed the chair by doing the load analysis and by carrying out some other important tests. However one important aspect that I did not account for was the safety of the design, which I realized after the interview. Another mistake that I think I committed was that I did not use the technical terms related to designing. I felt they were looking out for those important technical terms. I was then asked that if I had a choice of using wood, steel and plastic which of those materials would I use to make the chair. I basically had to give the preference order. I replied stating that plastic would be my first choice since it is cheap and most people can afford it, then steel because the fabrication process was less tedious in case of steel and placed wood last. They then cross questioned me that if I considered wood to be least preferred material for designing the chair, then why furniture is being manufactured from wood. I could not give them a suitable answer.

College Name: IIT ROORKEE

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: basic intro, focussed mainly on projexts you have done and softwares u know.. and basic core questions

General Tips: prepare well
Skills:
Duration: 2
College Name: IIT Madras
Motivation: seniors good reviews

Interview Questionnaire 

1 Question

  • Q1. How will you design a swimming diving board?
  • Ans. 

    To design a swimming diving board, I will consider the material, dimensions, weight capacity, and safety features.

    • Choose a durable and non-slip material like fiberglass or aluminum

    • Determine the appropriate length, width, and thickness based on the intended use and user demographics

    • Calculate the weight capacity and ensure it can support the maximum weight of a user

    • Incorporate safety features like a non-slip surface, rou...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a standard resume for this company as per our institute placement cell norms. I usually changed my “Areas of Interest” as per the company profile. For Caterpillar, I laid emphasis on all of my technical activities.

Round: Test
Experience: The written test was purely technical covering almost all the major topics of Mechanical Engineering course curriculum. The questions related to Fluid Mechanics were particularly difficult. The questions were all objective and the test was for a duration of 90 minutes.
Tips: For Caterpillar, one must have in-depth knowledge of almost all major topics of mechanical.
Duration: 90 minutes

Round: Technical Interview
Experience: The questions were totally technical. There were no HR questions even in the beginning. They asked me about my topic of interest and I replied as Solid Mechanics. They asked questions related to designing of stuff. For example one of the question that was asked from me was – How will you design a swimming diving board? It was a question on cantilever beam. The whole interview continued on this particular question. They kept on counter questioning and gave me additional situations as I proceeded and I had to incorporate them in my design process. They asked me to develop a static design and thereafter asked me to develop a dynamic design. Then they asked me for another subject of interest which I stated as vibration design. Then they asked me to do vibration analysis of the swimming board that I had designed earlier in the interview. They also asked me my favorite topic from class 10th and I replied as Mathematics. They asked me a simple question on it which I answered correctly.

College Name: IIT ROORKEE
Motivation: Most of the information regarding the company was obtained by attending the Pre-Placement Talk. The company is one of the pioneers in its field and hence it was sort of a dream company for students and we had researched about it by visiting its website and the Wikipedia Page.

DMI DRAEXLMAIER MANUFACTURING Interview FAQs

How many rounds are there in DMI DRAEXLMAIER MANUFACTURING Diploma Trainee Engineer interview?
DMI DRAEXLMAIER MANUFACTURING interview process usually has 1 rounds. The most common rounds in the DMI DRAEXLMAIER MANUFACTURING interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Caterpillar Inc Interview Questions
4.2
 • 178 Interviews
KONE Interview Questions
4.1
 • 105 Interviews
Hitachi Interview Questions
4.0
 • 81 Interviews
Concentric Interview Questions
3.8
 • 36 Interviews
Toshiba Interview Questions
4.0
 • 28 Interviews
Europa Locks Interview Questions
3.6
 • 20 Interviews
PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
View all

DMI DRAEXLMAIER MANUFACTURING Diploma Trainee Engineer Reviews and Ratings

based on 1 review

2.0/5

Rating in categories

2.0

Skill development

1.0

Work-life balance

2.0

Salary

1.0

Job security

2.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 1 Review and Rating
Production Supervisor
17 salaries
unlock blur

₹2.9 L/yr - ₹4.5 L/yr

Assistant Manager
16 salaries
unlock blur

₹6.8 L/yr - ₹11.6 L/yr

Production Engineer
16 salaries
unlock blur

₹1.1 L/yr - ₹3.5 L/yr

Industrial Engineer
15 salaries
unlock blur

₹2.5 L/yr - ₹4.6 L/yr

Junior Supervisor
14 salaries
unlock blur

₹3.2 L/yr - ₹4.1 L/yr

Explore more salaries
Compare DMI DRAEXLMAIER MANUFACTURING with

KONE

4.1
Compare

Caterpillar Inc

4.2
Compare

Hitachi

4.0
Compare

Stanley Black & Decker

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview