Upload Button Icon Add office photos

Danieli

Compare button icon Compare button icon Compare

Filter interviews by

Danieli Engineer Trainee Interview Questions and Answers

Updated 10 Feb 2022

Danieli Engineer Trainee Interview Experiences

1 interview found

I applied via Referral and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the use of Speedi sleeve ?
  • Ans. 

    Speedi sleeve is used to repair worn or damaged shafts without the need for expensive machining or replacement.

    • Speedi sleeve is a thin-walled stainless steel sleeve that fits over a damaged shaft.

    • It provides a new smooth surface for the shaft, eliminating the need for machining or replacement.

    • The sleeve is easy to install and can be used in various applications such as pumps, motors, and gearboxes.

    • It helps to extend th...

  • Answered by AI
  • Q2. What are shaft failures
  • Ans. 

    Shaft failures refer to the mechanical breakdown or damage of a rotating shaft.

    • Shaft failures can occur due to various reasons such as fatigue, overload, misalignment, corrosion, or material defects.

    • Common types of shaft failures include fractures, cracks, bending, torsional failure, and wear.

    • Examples of shaft failures include a cracked shaft in a car engine, a bent shaft in a wind turbine, or a worn-out shaft in a con...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Danieli Engineer Trainee interview:
  • SAP
  • Sales
  • technology
Interview preparation tips for other job seekers - Do work honestly, one day it will change your life.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me something about your self??
  • Q2. What is your daily work management???
Round 3 - HR 

(1 Question)

  • Q1. Why are you want to change company??

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have expain DWM properly and Position in organization chart then your selection is confirm.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is a resistor?
  • Ans. 

    A resistor is an electronic component that resists the flow of electrical current.

    • Resistors are used to control the amount of current flowing in a circuit.

    • They are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.

    • Resistors dissipate energy in the form of heat when current flows through them.

    • Common types of resistors include carbon film, metal film, and wirewound resistors.

  • Answered by AI
  • Q2. What is a transistor?
  • Ans. 

    A transistor is a semiconductor device used to amplify or switch electronic signals.

    • Transistors are fundamental building blocks of modern electronic devices.

    • They can amplify electrical signals, control the flow of current, and act as switches.

    • Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Interview on basis things on mechanical and electrical and hydraulic things
Round 3 - Interview with NSH and team 

(1 Question)

  • Q1. Asking the troubleshooting of previous attended complaints
Round 4 - HR 

(1 Question)

  • Q1. Asking current company CTc and sent breakup salary
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in software development, specializing in backend systems and database management.

    • 10+ years of experience in software development

    • Specialize in backend systems and database management

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and SQL

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - One-on-one 

(1 Question)

  • Q1. They just done F2F along with tool test

I applied via Campus Placement and was interviewed before Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About academic projects and individual role.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and sincere for fresher.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Why do you want to change the job?
  • Q2. Where do you want to see yourself in next 5 years?
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your highest qualification
  • Ans. 

    My highest qualification is a Master's degree in Electrical Engineering.

    • Master's degree in Electrical Engineering

    • Specialized in power systems

    • Thesis focused on renewable energy integration

    • Completed advanced courses in control systems

    • Published research papers in IEEE conferences

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is your role and responsibilities in the project quality?
  • Ans. 

    As a Senior Engineer, my role in project quality is to ensure that all deliverables meet the required standards and specifications.

    • Developing and implementing quality assurance processes and procedures

    • Conducting regular audits and inspections to identify any quality issues

    • Collaborating with cross-functional teams to address and resolve quality concerns

    • Creating and maintaining quality documentation, including test plans...

  • Answered by AI

I applied via Walk-in and was interviewed in Nov 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What's moulding defect?
  • Ans. 

    Moulding defect refers to any imperfection or flaw in the manufacturing process of moulded products.

    • Moulding defects can occur due to various reasons such as improper material flow, inadequate cooling, or incorrect mould design.

    • Examples of moulding defects include flash, sink marks, warpage, voids, and short shots.

    • Flash occurs when excess material escapes from the mould, resulting in a thin layer of material around the...

  • Answered by AI
  • Q2. How can you control silver marks?
  • Ans. 

    Silver marks can be controlled by using protective coatings and proper cleaning techniques.

    • Apply a protective coating, such as lacquer or wax, to prevent silver from tarnishing

    • Store silver items in airtight containers or with anti-tarnish strips to minimize exposure to air

    • Avoid contact with substances that can cause silver to tarnish, such as sulfur-containing materials

    • Clean silver regularly using gentle methods, such ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do comfort at all times

Danieli Interview FAQs

How many rounds are there in Danieli Engineer Trainee interview?
Danieli interview process usually has 1 rounds. The most common rounds in the Danieli interview process are Technical.
What are the top questions asked in Danieli Engineer Trainee interview?

Some of the top questions asked at the Danieli Engineer Trainee interview -

  1. What is the use of Speedi sleev...read more
  2. What are shaft failu...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

TÜV SÜD Interview Questions
3.9
 • 63 Interviews
Timken Interview Questions
4.0
 • 47 Interviews
Alfa Laval Interview Questions
3.9
 • 30 Interviews
Flowserve Interview Questions
4.0
 • 29 Interviews
Sulzer Interview Questions
3.9
 • 27 Interviews
JNS Instruments Interview Questions
3.8
 • 27 Interviews
Ingersoll Rand Interview Questions
4.0
 • 27 Interviews
View all

Danieli Engineer Trainee Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
98 salaries
unlock blur

₹7 L/yr - ₹13 L/yr

Manager
58 salaries
unlock blur

₹7.8 L/yr - ₹19.1 L/yr

Senior Engineer
47 salaries
unlock blur

₹5.6 L/yr - ₹11 L/yr

Senior Manager
32 salaries
unlock blur

₹11 L/yr - ₹22 L/yr

Senior Design Engineer
23 salaries
unlock blur

₹5.8 L/yr - ₹10.5 L/yr

Explore more salaries
Compare Danieli with

TÜV SÜD

3.9
Compare

Timken

4.0
Compare

EMERSON PROCESS MANAGEMENT

4.0
Compare

Danfoss Industries

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview