Upload Button Icon Add office photos

Danfoss Industries

Compare button icon Compare button icon Compare

Filter interviews by

Danfoss Industries Product Manager Interview Questions and Answers

Updated 25 Oct 2024

Danfoss Industries Product Manager Interview Experiences

1 interview found

Product Manager Interview Questions & Answers

user image Shruthyreddy Basireddy

posted on 25 Oct 2024

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Question related to project,in detail prodecure we hav eto explain .
  • Q2. Basic question related to jd.
  • Q3. Be thorough with the project.
  • Q4. Questions might expect on resume.
  • Q5. Very friendly ,accepts excues some times to if there is any health issues.

Interview questions from similar companies

I applied via Referral and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Risk management
  • Q2. Project life cycle
  • Q3. Payment terms

Interview Preparation Tips

Interview preparation tips for other job seekers - PMP preparation will help

I applied via Recruitment Consulltant and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Related to practical cases under different laws and daily working knowledge

Round 3 - One-on-one 

(2 Questions)

  • Q1. Questions related to past experiences and knowledge.
  • Q2. Behavioural Event Interview
  • Ans. Be sure to mention your role in each events you share
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - It was too long a waiting period after having the second and final rounds. First time there was a written test too.

I applied via Referral and was interviewed before Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What is grinding,Multi point cutting tools.
  • Ans. 

    Grinding is a process of removing material from a workpiece using a grinding wheel. Multi-point cutting tools are tools with multiple cutting edges.

    • Grinding is commonly used in manufacturing to achieve tight tolerances and smooth finishes.

    • Multi-point cutting tools are used in machining operations to remove material from a workpiece.

    • Examples of multi-point cutting tools include drills, end mills, and reamers.

    • The number ...

  • Answered by AI
  • Q2. What is 5s,kaizen,7qc tools.
  • Ans. 

    5S, Kaizen, and 7QC tools are methodologies used in manufacturing to improve efficiency and quality.

    • 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing, and sustaining.

    • Kaizen is a continuous improvement philosophy that involves making small, incremental changes to processes and systems.

    • 7QC tools are a set of quality control tools used to identify and solve problems, includi...

  • Answered by AI
  • Q3. Describe about various grinding defects.
  • Ans. 

    Grinding defects are common in manufacturing processes and can include chatter marks, burn marks, and surface cracks.

    • Chatter marks are caused by vibration during grinding and appear as a series of regular marks on the workpiece.

    • Burn marks are caused by excessive heat during grinding and appear as discolored areas on the workpiece.

    • Surface cracks can be caused by a variety of factors, including improper grinding techniqu...

  • Answered by AI
  • Q4. What is plumge grinding and through feed grinding.
  • Ans. 

    Plunge grinding and through feed grinding are two types of grinding processes used in manufacturing.

    • Plunge grinding involves grinding a part by plunging it into the grinding wheel, creating a flat or tapered surface.

    • Through feed grinding involves feeding the part through the grinding wheels, creating a straight and smooth surface.

    • Plunge grinding is typically used for parts with complex shapes or contours, while through...

  • Answered by AI
  • Q5. What is kanban
  • Ans. 

    Kanban is a lean manufacturing system that uses visual cues to signal the need for production or movement of materials.

    • Kanban originated in Japan as a way to improve manufacturing efficiency.

    • It involves using cards or other visual cues to signal when materials or products are needed.

    • Kanban is often used in conjunction with just-in-time (JIT) manufacturing.

    • It can also be applied to other industries, such as software dev...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Must have a good knowledge about grinding,7qc tools,kaizen if there is any example then share.good knowldge about 5S
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Dec 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is the grinding process
  • Ans. 

    The grinding process involves using a rotating abrasive wheel to remove material from a workpiece.

    • Grinding is a machining process that uses an abrasive wheel to remove material from a workpiece.

    • The workpiece is held in place while the grinding wheel rotates at high speed, making contact with the material and removing small chips.

    • Different types of grinding processes include surface grinding, cylindrical grinding, and c...

  • Answered by AI
  • Q2. How to deal with unionised manpower
  • Ans. 

    Establish open communication, respect union rules, negotiate fairly, address concerns promptly

    • Establish open communication channels with union representatives

    • Respect union rules and regulations to maintain a positive relationship

    • Negotiate fairly and transparently during contract discussions

    • Address any concerns or grievances from unionised manpower promptly and effectively

  • Answered by AI
  • Q3. Past achievement and projects.
  • Q4. More about bearing

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep a good grip of Grinding process and Heat treatment process.

I applied via Referral and was interviewed before Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What is grinding,Multi point cutting tools.
  • Ans. 

    Grinding is a process of removing material from a workpiece using an abrasive wheel. Multi-point cutting tools are tools with multiple cutting edges.

    • Grinding is used to achieve high precision and surface finish on workpieces.

    • Multi-point cutting tools are commonly used in machining operations such as milling, drilling, and turning.

    • Examples of multi-point cutting tools include end mills, drills, and taps.

    • The number of cu...

  • Answered by AI
  • Q2. What is 5s,kaizen,7qc tools.
  • Ans. 

    5S, Kaizen, and 7QC tools are all methodologies used in lean manufacturing to improve efficiency and quality.

    • 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing, and sustaining.

    • Kaizen is a continuous improvement process that involves identifying and eliminating waste and inefficiencies.

    • 7QC tools are a set of quality control tools used to identify and solve problems, includi...

  • Answered by AI
  • Q3. Describe about various grinding defects.
  • Ans. 

    Grinding defects are common in manufacturing processes and can affect the quality of the final product.

    • Cracks or fractures in the material being ground

    • Uneven surface finish

    • Burn marks or discoloration

    • Chatter marks or vibration

    • Incorrect wheel dressing or selection

    • Improper machine alignment or setup

    • Inadequate coolant or lubrication

    • Excessive wheel wear or loading

    • Incorrect feed rate or grinding pressure

  • Answered by AI
  • Q4. What is plumge grinding and through feed grinding.
  • Ans. 

    Plunge grinding and through feed grinding are two types of grinding processes used in manufacturing.

    • Plunge grinding involves grinding a part by plunging it into the grinding wheel, while through feed grinding involves feeding the part through the grinding wheel continuously.

    • Plunge grinding is typically used for parts that require a tight tolerance and a smooth surface finish, while through feed grinding is used for hig...

  • Answered by AI
  • Q5. What is kanban
  • Ans. 

    Kanban is a visual project management system that helps teams improve workflow efficiency.

    • Kanban originated from the Toyota Production System and is widely used in agile software development.

    • It uses visual boards with columns and cards to represent tasks and their progress.

    • Cards move across columns, indicating the status of each task (e.g., to-do, in progress, done).

    • Kanban promotes continuous flow, limiting work in pro...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Must have a good knowledge about grinding,7qc tools,kaizen if there is any example then share.good knowldge about 5S
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. 1) control logic of turbine 2) operation of turbine
  • Ans. 

    Control logic of a turbine involves regulating the flow of fuel and air to maintain desired speed and power output. Operation of a turbine includes starting, monitoring, and shutting down the turbine.

    • Control logic of a turbine involves adjusting fuel and air flow based on speed and power requirements

    • Operation of a turbine includes starting procedures such as pre-purge and ignition sequence

    • Monitoring turbine operation i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thourough with the technical questions, other things are irrevant

I applied via Referral and was interviewed before Apr 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic engineering questions
Round 3 - One-on-one 

(1 Question)

  • Q1. Its about next level technical questions..More on experience
Round 4 - HR 

(1 Question)

  • Q1. General joining formalities

Interview Preparation Tips

Interview preparation tips for other job seekers - Expect basic engineering and work experience questions
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell about your self
  • Ans. 

    Experienced project manager with a proven track record of successfully leading cross-functional teams to deliver projects on time and within budget.

    • Over 5 years of project management experience

    • Strong leadership and communication skills

    • Proficient in project management tools such as Asana and Jira

    • Managed a team of 10+ members to launch a new product within a tight deadline

  • Answered by AI
  • Q2. Details of project management

I appeared for an interview before Feb 2021.

Round 1 - HR 

(1 Question)

  • Q1. Where do you see yourself in 5 years?

Interview Preparation Tips

Interview preparation tips for other job seekers - Align your objectives with Company's long term vision or at least try to achieve departmental head position.

Danfoss Industries Interview FAQs

How many rounds are there in Danfoss Industries Product Manager interview?
Danfoss Industries interview process usually has 1 rounds. The most common rounds in the Danfoss Industries interview process are Technical.
How to prepare for Danfoss Industries Product Manager interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Danfoss Industries. The most common topics and skills that interviewers at Danfoss Industries expect are Life Cycle, Marketing Communication, Problem Solving, Product Development and Product Management.
What are the top questions asked in Danfoss Industries Product Manager interview?

Some of the top questions asked at the Danfoss Industries Product Manager interview -

  1. question related to project,in detail prodecure we hav eto explai...read more
  2. very friendly ,accepts excues some times to if there is any health issu...read more
  3. basic question related to ...read more

Tell us how to improve this page.

Danfoss Industries Product Manager Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 239 Interviews
John Deere Interview Questions
4.1
 • 234 Interviews
Cummins Interview Questions
4.3
 • 233 Interviews
Caterpillar Inc Interview Questions
4.2
 • 177 Interviews
Atlas Copco Interview Questions
4.2
 • 79 Interviews
TechnipFMC Interview Questions
4.0
 • 72 Interviews
TÜV SÜD Interview Questions
3.9
 • 64 Interviews
Hilti Interview Questions
3.5
 • 61 Interviews
Timken Interview Questions
4.0
 • 47 Interviews
View all
Senior Engineer
46 salaries
unlock blur

₹6 L/yr - ₹23.2 L/yr

Deputy Manager
40 salaries
unlock blur

₹6 L/yr - ₹17.6 L/yr

Engineer
39 salaries
unlock blur

₹6.4 L/yr - ₹20 L/yr

Trainee
29 salaries
unlock blur

₹1.5 L/yr - ₹3 L/yr

Assistant Manager
28 salaries
unlock blur

₹7.5 L/yr - ₹18 L/yr

Explore more salaries
Compare Danfoss Industries with

John Deere

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

Caterpillar Inc

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview