AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Busch Vacuum India Service Engineer Interview Questions and Answers
Busch Vacuum India Service Engineer Interview Experiences
1 interview found
Anonymous
(3 Questions)
- Q1. Which is the prime driving part of a vacuum pump?
- Ans.
The prime driving part of a vacuum pump is the motor.
The motor is responsible for providing the power to drive the vacuum pump.
It converts electrical energy into mechanical energy to create the necessary suction.
The motor drives the impeller or piston, which generates the vacuum pressure.
Different types of vacuum pumps may have different types of motors, such as electric motors or internal combustion engines.
- Q2. Incase of vacuum pump, which is higher 5mbar or 2mbar?
- Ans.
2mbar is higher than 5mbar in the case of a vacuum pump.
In the case of a vacuum pump, the lower the pressure, the higher the vacuum level.
Pressure is measured in units of pressure, such as millibar (mbar).
So, 2mbar is a lower pressure than 5mbar, indicating a higher vacuum level.
- Q3. Why oil is used in a pump?
- Ans.
Oil is used in a pump for lubrication and cooling purposes.
Oil acts as a lubricant, reducing friction between moving parts in the pump.
It helps to cool down the pump by dissipating heat generated during operation.
Oil also helps to seal the pump, preventing leakage and maintaining pressure.
Different types of oil are used depending on the pump's requirements, such as viscosity and temperature range.
Examples of pumps that...
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
5 Questions
- Q1. 1. What is ohm's Law
- Ans.
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance.
Ohm's Law is expressed as V = IR, where V is the voltage, I is the current, and R is the resistance.
It helps in understanding the relationship between voltage, current, and resistance in an electrical circuit.
For example, if the voltage is increased while t...
- Q2. What is Linux Os
- Ans.
Linux OS is an open-source operating system based on the Unix kernel.
Linux OS is known for its stability, security, and flexibility.
It is widely used in servers, embedded systems, and mobile devices.
Examples of popular Linux distributions include Ubuntu, Fedora, and CentOS.
- Q3. Full form of CCD/TI Camera
- Ans.
CCD stands for Charge-Coupled Device and TI Camera stands for Texas Instruments Camera.
CCD is a type of image sensor used in digital cameras and video cameras.
TI Camera refers to cameras developed by Texas Instruments, a technology company.
CCD/TI Cameras are commonly used in various applications such as surveillance, photography, and scientific imaging.
CCD/TI Cameras convert light into electrical signals for capturing ...
- Q4. Whic command use for make directory in Linux system
- Ans.
The command used to make a directory in Linux is 'mkdir'.
The 'mkdir' command is used to create a new directory in Linux.
It can be used with various options to set permissions, create multiple directories, etc.
For example, 'mkdir directory_name' creates a new directory with the specified name.
To create multiple directories at once, use 'mkdir dir1 dir2 dir3'.
To create directories with specific permissions, use 'mkdir -m
- Q5. Which Service use for local server in parrot os
- Ans.
The service used for local server in Parrot OS is Apache.
Apache is a popular open-source web server software.
It is widely used for hosting websites and serving web content.
Apache provides a robust and secure environment for running web applications.
It supports various features like virtual hosting, SSL/TLS encryption, and URL rewriting.
Parrot OS includes Apache as the default web server for local development.
Interview Preparation Tips
Skills evaluated in this interview
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Previous company work experience
- Q2. Plans in next 5 years
- Ans.
I plan to continue developing my technical skills and taking on leadership roles within the company.
Pursue advanced technical certifications
Lead cross-functional teams on complex projects
Mentor junior engineers
Explore opportunities for innovation and process improvement
Collaborate with senior management to set strategic goals
Interview Preparation Tips
(1 Question)
- Q1. General discussion of your work history
(1 Question)
- Q1. Stream technical question
General work related assignment
Interview Preparation Tips
(2 Questions)
- Q1. What is QA and QC
- Ans.
QA stands for Quality Assurance and involves processes to prevent defects, while QC stands for Quality Control and involves processes to identify defects.
QA focuses on preventing defects in the product or service being delivered
QC focuses on identifying defects in the product or service being delivered
QA involves processes such as reviews, audits, and process improvements
QC involves processes such as testing, inspectio...
- Q2. Welding details
Interview Preparation Tips
sumit randive
Selected
I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.
Solving questions paper
CAD &Solid work test
(2 Questions)
- Q1. Project Handling experience
- Q2. Salary negotiation
Selected
I applied via LinkedIn and was interviewed before Mar 2022. There were 3 interview rounds.
(2 Questions)
- Q1. Your previous experience in witch our competency skill.
- Q2. What Your working team size.
(1 Question)
- Q1. HR relation good. We communicate in hindi
Interview Preparation Tips
Selected
I appeared for an interview before Mar 2024, where I was asked the following questions.
- Q1. What is the method for calculating the circumference of a circle using a measuring tape?
- Ans.
To calculate the circumference of a circle, measure its diameter with a tape and multiply by π (pi).
Use a flexible measuring tape to measure the diameter of the circle directly across its center.
Ensure the tape is straight and not sagging for an accurate measurement.
Once you have the diameter (d), use the formula: Circumference (C) = π × d.
For example, if the diameter is 10 cm, then C = π × 10 cm ≈ 31.42 cm.
Alternative...
- Q2. What is the conversion factor from inches to millimeters?
- Ans.
1 inch is equal to 25.4 millimeters, a standard conversion used in engineering and design.
1 inch = 25.4 mm
To convert inches to mm, multiply the number of inches by 25.4.
Example: 2 inches = 2 * 25.4 = 50.8 mm
Example: 5 inches = 5 * 25.4 = 127 mm
This conversion is crucial for precision in mechanical design.
Selected
I applied via LinkedIn and was interviewed before Dec 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Questions more about my project on master
- Q2. Questions based on my resume
(2 Questions)
- Q1. Questions on SEM analysis
- Q2. More questions on aptitude
Interview Questionnaire
2 Questions
- Q1. How many types of gears?
- Ans.
There are several types of gears, including spur, helical, bevel, worm, rack and pinion, and planetary gears.
Spur gears have straight teeth and are the most common type.
Helical gears have angled teeth and produce less noise and vibration than spur gears.
Bevel gears are used to transmit power between shafts that are at an angle to each other.
Worm gears are used to transmit power at a right angle and have high gear ratio...
- Q2. I said 5 types of gears
Busch Vacuum India Interview FAQs
Tell us how to improve this page.
Busch Vacuum India Interviews By Designations
- Busch Vacuum India SAP SD Consultant Interview Questions
- Busch Vacuum India EI Commissioning Engineer Interview Questions
- Busch Vacuum India System Engineer Interview Questions
- Busch Vacuum India Senior SAP Abap Consultant Interview Questions
- Busch Vacuum India Service Engineer Interview Questions
- Busch Vacuum India Trainee Interview Questions
Interview Questions for Popular Designations
- Service Advisor Interview Questions
- Senior Service Engineer Interview Questions
- Customer Service Executive Interview Questions
- Service Technician Interview Questions
- Customer Service Associate Interview Questions
- Servicenow Developer Interview Questions
- Field Service Engineer Interview Questions
- Service Manager Interview Questions
- Show more
Interview Questions from Similar Companies
Busch Vacuum India Service Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Senior Sales Engineer
10
salaries
|  ₹6 L/yr - ₹9.5 L/yr |
|
Service Engineer
10
salaries
| ₹2 L/yr - ₹6.5 L/yr |
|
Senior Service Engineer
9
salaries
| ₹5.2 L/yr - ₹10 L/yr |
|
Senior Territory Business Manager
6
salaries
| ₹8.4 L/yr - ₹14.1 L/yr |
|
Quality Engineer
6
salaries
| ₹3.6 L/yr - ₹5.8 L/yr |
Europa Locks
Trelleborg
Case New-Holland Construction Equipment India
Tokai Rubber Auto Parts India
- Home >
- Interviews >
- Busch Vacuum India Interview Questions >
- Busch Vacuum India Service Engineer Interview Questions
