Upload Button Icon Add office photos

Filter interviews by

Bridgestone India Automotive Products Quality Inspector Interview Questions and Answers

Updated 6 Jul 2022

Bridgestone India Automotive Products Quality Inspector Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Vehicle inspection check sheet improvement done as per SQDC and saved 32 pages to 14 pages and saved
  • Ans. 

    Improved vehicle inspection check sheet as per SQDC, reducing pages from 32 to 14.

    • Identified unnecessary fields and removed them

    • Reorganized the layout for better clarity

    • Used abbreviations and symbols to save space

    • Tested the new check sheet for accuracy and efficiency

    • Received positive feedback from team members and management

  • Answered by AI
  • Q2. Providing pre-dispatch inspection reports on customer-based Inspection standards and ensuring only quality product dispatch to the customer on daily basis

Interview Preparation Tips

Interview preparation tips for other job seekers - Providing pre-dispatch inspection reports on customer-based Inspection standards and ensuring
only quality product dispatch to the customer on daily basis
❖ Validate Process audit in shop floor based on work instruction for production & QC process
❖ Sampling evaluation for regular production vehicles Gap & Step [Body & Trim], Functional and
Appearance
❖ Geometrical dimension issue analysis mainly for Fit & Finish of product
❖ Line / Process study for effective DPU & FTQ improvement based on previous day defects
❖ Defect outflow analysis for regular production vehicles
❖ Countermeasure follow-up with respective team to avoid field failures
❖ Confirmation of Job Allocation & Man mapping for line balancing
❖ Following the Skill matrix & Ensuring Multi Skills training to team members
❖ Improve inspector skill through Simulation test on monthly basis
❖ Having good skills in apply and maintain 5S techniques
❖ Process knowledge of manufacturing processes and good understanding concepts of lean
Manufacturing& 7 QC tools
❖ Proper maintenance of change point sheets and continuous updating in work instruction
❖ Close monitoring for calibration Of Jigs & Equipment’s as per schedule
❖ Maintaining change point in tracking in process for future reference
❖ PFMEA for new process / TPM/Model (W.I Adherence, W.I Assurance) Report preparation for DRM

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Quality 

(1 Question)

  • Q1. What is Quality, what is 7Qc tools, what is 8QB , what is 7 sefty fundamental, what is 7 golden Rule, what is 5S.
  • Ans. 

    Quality is meeting or exceeding customer expectations. 7QC tools, 8D, 7 safety fundamentals, 7 golden rules, and 5S are quality improvement methodologies.

    • 7QC tools are a set of problem-solving tools used to improve quality. Examples include Pareto charts, fishbone diagrams, and control charts.

    • 8D is a problem-solving methodology used to identify, correct, and prevent problems. It involves eight steps, including defining...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Faurecia Quality Inspector interview:
  • Quality
Interview preparation tips for other job seekers - Good behaviour, respect the all senior person, mutual understanding, always Work in harmony. Work diligently.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

Quality management and customer delight

Round 2 - Case Study 

Mechanical all measurements instrument

Interview Preparation Tips

Interview preparation tips for other job seekers - No personal advice

I applied via Company Website and was interviewed in Oct 2021. There were 4 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Coding Test 
Round 3 - Aptitude Test 
Round 4 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality assurance anlace quality

I appeared for an interview in Mar 2021.

Interview Questionnaire 

7 Questions

  • Q1. What is control chart???
  • Ans. 

    A control chart is a statistical tool used to monitor and control a process over time.

    • It helps to identify and analyze variations in a process.

    • It consists of a central line representing the average value and upper and lower control limits.

    • Data points falling outside the control limits indicate special causes of variation.

    • Common types of control charts include X-bar and R charts, X-bar and S charts, and p charts.

    • Control...

  • Answered by AI
  • Q2. How you give setup approval during set-up change?
  • Q3. Principal of vernier caliper?
  • Ans. 

    The principle of vernier caliper is based on the concept of vernier scale and the ability to measure small distances accurately.

    • Vernier caliper is a measuring instrument used to measure the dimensions of an object with high precision.

    • It consists of a main scale and a sliding vernier scale, which allows for more accurate measurements.

    • The principle behind vernier caliper is that the vernier scale has a smaller division t...

  • Answered by AI
  • Q4. Your last job profile and responsibilities.
  • Q5. Why we should hire you?
  • Q6. What are the no. Of angle of projection in drawing?
  • Ans. 

    The number of angles of projection in a drawing depends on the specific requirements and complexity of the object being depicted.

    • The number of angles of projection can vary depending on the purpose of the drawing.

    • Common angles of projection include front view, top view, side view, and isometric view.

    • Additional angles may be required for complex objects or to show specific details.

    • The number of angles can also depend on...

  • Answered by AI
  • Q7. In which angle of projection drawing should be prepared?
  • Ans. 

    The angle of projection drawing should be prepared in the third angle projection.

    • The third angle projection is commonly used in engineering and technical drawings.

    • In third angle projection, the object is placed in the third quadrant of the orthographic projection.

    • The top view is placed above the front view, and the right side view is placed to the right of the front view.

    • This method is widely adopted in many countries ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest, simple, formal and sprad +ve vibes

Interview Questionnaire 

1 Question

  • Q1. Introduction
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. 5 s Quality control poka yoka
  • Q2. 7 qc tools ppm
Round 2 - Assignment 

Quality inspector fainal lain part cheking

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality engineer

Interview Questionnaire 

1 Question

  • Q1. What is your qualifications

I appeared for an interview in Feb 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 
Round 3 - HR 

(4 Questions)

  • Q1. What are your salary expectations?
  • Ans. 

    I am open to discussing salary based on the responsibilities and expectations of the role.

    • I am flexible and willing to negotiate based on the specific job requirements.

    • I am looking for fair compensation for my skills and experience.

    • I am open to discussing benefits and other forms of compensation.

    • I am interested in opportunities for growth and advancement within the company.

  • Answered by AI
  • Q2. Share details of your previous job.
  • Ans. 

    I worked as a Quality Inspector at XYZ Company.

    • Conducted inspections on incoming materials, in-process products, and finished goods

    • Ensured compliance with industry standards and company policies

    • Identified and documented non-conformances and worked with production team to resolve issues

    • Maintained inspection records and generated reports for management

    • Collaborated with cross-functional teams to improve quality processes

  • Answered by AI
  • Q3. Why should we hire you?
  • Ans. 

    I have the necessary skills, experience, and attention to detail to ensure quality standards are met consistently.

    • I have experience in quality inspection and have a keen eye for detail.

    • I am knowledgeable in industry standards and regulations.

    • I am a quick learner and can adapt to new processes and procedures easily.

    • I am a team player and can work collaboratively with others to achieve common goals.

    • I am committed to ensu...

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a detail-oriented individual with experience in quality inspection and a passion for ensuring products meet high standards.

    • I have worked as a quality inspector for 3 years

    • I am familiar with ISO 9001 standards

    • I have experience using measuring tools such as calipers and micrometers

    • I am skilled in identifying defects and implementing corrective actions

    • I am a team player and enjoy collaborating with others to achieve

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you for giving me this opportunity.

I applied via Company Website and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for Faurecia Quality Inspector interview:
  • Diploma
  • Quality Inspection
Interview preparation tips for other job seekers - Name : Vinod
Mob no : XXXXX
Experience : 1year
Worked in : Indo-Mim Pvt Ltd Hoskote Banglore

Bridgestone India Automotive Products Interview FAQs

How many rounds are there in Bridgestone India Automotive Products Quality Inspector interview?
Bridgestone India Automotive Products interview process usually has 2 rounds. The most common rounds in the Bridgestone India Automotive Products interview process are Resume Shortlist and Technical.
What are the top questions asked in Bridgestone India Automotive Products Quality Inspector interview?

Some of the top questions asked at the Bridgestone India Automotive Products Quality Inspector interview -

  1. Vehicle inspection check sheet improvement done as per SQDC and saved 32 pages ...read more
  2. Providing pre-dispatch inspection reports on customer-based Inspection standard...read more

Tell us how to improve this page.

Bridgestone India Automotive Products Quality Inspector Salary
based on 22 salaries
₹1.6 L/yr - ₹3 L/yr
5% less than the average Quality Inspector Salary in India
View more details

Bridgestone India Automotive Products Quality Inspector Reviews and Ratings

based on 7 reviews

4.4/5

Rating in categories

3.4

Skill development

2.8

Work-life balance

3.3

Salary

2.3

Job security

2.7

Company culture

3.0

Promotions

3.6

Work satisfaction

Explore 7 Reviews and Ratings
Assistant Manager
76 salaries
unlock blur

₹5 L/yr - ₹18.1 L/yr

Junior Manager
67 salaries
unlock blur

₹4.2 L/yr - ₹8.7 L/yr

Territory Sales Manager
51 salaries
unlock blur

₹7.1 L/yr - ₹15 L/yr

Junior Executive
48 salaries
unlock blur

₹1.8 L/yr - ₹3 L/yr

Production Engineer
45 salaries
unlock blur

₹1.3 L/yr - ₹6.2 L/yr

Explore more salaries
Compare Bridgestone India Automotive Products with

Delphi TVS

3.9
Compare

Motherson Automotive Technologies and Engineering

3.8
Compare

Belrise Industries

3.8
Compare

Krishna Maruti

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview