Filter interviews by
I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.
The kilowatt of a domestic house varies depending on the electrical appliances and usage.
The kilowatt of a domestic house is determined by the electrical load it carries.
It can range from a few kilowatts to several kilowatts depending on the size of the house and the number of appliances.
For example, a small apartment may have a kilowatt range of 1-3 kW, while a larger house with multiple appliances may have a range of
I have 5 years of experience in quality control line inspection.
I have been working as a quality control line inspector for the past 5 years.
During my experience, I have gained expertise in inspecting products on the production line to ensure they meet quality standards.
I am familiar with using various inspection tools and techniques to identify defects and deviations.
I have a strong attention to detail and can effecti...
An antipumping relay is used to prevent the breaker from repeatedly closing and opening in case of a fault.
The antipumping relay is a protective device used in circuit breakers.
It prevents the breaker from 'pumping' or repeatedly closing and opening due to a fault.
When a fault occurs, the relay detects the fault current and prevents the breaker from reclosing until the fault is cleared.
This helps to protect the electri...
Synchronous motor runs at a constant speed while hysteresis motor has a rotor that follows the rotating magnetic field.
Synchronous motor is used in applications where constant speed is required, such as in clocks and timers.
Hysteresis motor is used in applications where precise control of speed is required, such as in record players and tape recorders.
Synchronous motor has a stator and rotor that rotate at the same spe...
PLC is a hardware device that controls industrial processes, while SCADA is a software system that monitors and controls those processes.
PLC is a programmable logic controller that controls the input/output of industrial processes.
SCADA is a supervisory control and data acquisition system that collects and analyzes data from the industrial processes.
PLC is a hardware device, while SCADA is a software system.
PLC is used...
Relays are used for low power applications while contactors are used for high power applications.
Relays are typically used in control circuits to switch low power loads such as lights and fans.
Contactors are used to switch high power loads such as motors and compressors.
Relays have a lower current rating than contactors.
Contactors have larger contacts and can handle higher currents than relays.
Relays are typically smal...
Switches are used to control the flow of current in a circuit, while relays are used to switch a circuit on or off.
Switches are manually operated, while relays are electrically operated.
Switches are used in low voltage applications, while relays are used in high voltage applications.
Switches are simple in construction, while relays are more complex.
Examples of switches include light switches and toggle switches, while ...
Switch is an electronic component used to connect or disconnect a circuit while a timer is a device used to measure time intervals.
Switch is used to turn on/off a device while timer is used to control the duration of a device's operation.
Switch is a binary device with two states (on/off) while timer can be analog or digital and can measure time in seconds, minutes, or hours.
Examples of switches include light switches, ...
posted on 9 Jan 2024
Transients in the power system are caused by sudden changes in voltage or current.
Transients can be caused by lightning strikes, switching operations, or faults in the power system.
Lightning strikes can create high voltage transients that can damage equipment.
Switching operations, such as turning on or off a large load, can cause voltage transients.
Faults in the power system, such as short circuits, can also result in ...
I was interviewed in Jan 2021.
90 question in 90 minutes are given
I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.
Any one question in my sinner??
I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.
I applied via Walk-in and was interviewed in Oct 2022. There were 4 interview rounds.
The aptitude was quite interesting and it forces how you can think different to solve a simple prblm in different ways .
A pneumatic valve is a type of valve that uses compressed air to control the flow of fluids or gases.
Pneumatic valves are commonly used in industries such as manufacturing, automation, and transportation.
They are often used to control the flow of air, water, oil, or other fluids in a system.
Pneumatic valves can be operated manually, electrically, or through the use of solenoids.
They are typically made of materials such...
The case study was on how to operate in a emergency situation if the boiler drum pressure is getting high without any limit
Perseverance, hard work, and a positive attitude are the most important for success.
Perseverance helps to overcome obstacles and challenges.
Hard work is necessary to achieve goals and improve skills.
A positive attitude helps to stay motivated and focused on success.
Examples: Thomas Edison, who failed many times before inventing the light bulb, and Michael Jordan, who was cut from his high school basketball team but wen
I have a unique combination of technical skills and creativity that allows me to approach engineering problems from different perspectives.
I have a strong background in both software and hardware engineering.
I am skilled in programming languages such as Java, C++, and Python.
I have experience in designing and implementing complex systems.
I am a creative problem solver and can think outside the box to find innovative so...
based on 1 interview
Interview experience
Assistant Executive Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Computer Operator
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Technical Assistant
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Electrician
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Power
Adani Power
NTPC
Power Grid Corporation of India