AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
American Axle & Manufacturing CNC Turning Operator Interview Questions and Answers
American Axle & Manufacturing CNC Turning Operator Interview Experiences
1 interview found
Anonymous
Selected
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
(1 Question)
- Q1. About cnc machines
Top trending discussions
Interview questions from similar companies
Selected
(2 Questions)
- Q1. What is an advantage of mass production?
- Ans.
Mass production allows for lower costs due to economies of scale.
Lower production costs per unit
Increased efficiency in production processes
Ability to meet high demand quickly
Consistent quality control measures
Examples: assembly line production in automotive industry, electronics manufacturing
- Q2. How to indicate fundamental deviation of hole in BIS system?
- Ans.
Fundamental deviation of hole in BIS system can be indicated by specifying the tolerance zone and the position of the hole.
Specify the tolerance zone for the hole based on the BIS system standards.
Measure the actual position of the hole and compare it to the specified tolerance zone.
If the actual position of the hole falls outside the tolerance zone, indicate it as a fundamental deviation.
(1 Question)
- Q1. What mechanism is used to convert linear motion of plunger to rotary motion of pointer in D.T.I?
- Ans.
A rack and pinion mechanism is used to convert linear motion of plunger to rotary motion of pointer in D.T.I.
Rack and pinion mechanism consists of a gear (pinion) that meshes with a linear gear (rack) to convert linear motion into rotary motion.
As the plunger moves linearly, it engages with the rack which in turn rotates the pinion, causing the pointer to move.
This mechanism is commonly used in devices like dial indica...
Interview Preparation Tips
(2 Questions)
- Q1. Self introduction
- Q2. Technical questions
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(2 Questions)
- Q1. They are asked about previous working experience
- Q2. U and ur self employed
Interview Preparation Tips
(5 Questions)
- Q1. Tell me about yourself.
- Ans. My name is Prakash ,my father name mr. Dilip, form betul
- Q2. What are your strengths and weaknesses?
- Ans. My strength and weakness is my family
- Q3. What are your goals?
- Ans. My goals is my family be happy
- Q4. What is the difference between confidence and over confidence?
- Ans.
Confidence is belief in oneself based on experience and ability, while overconfidence is excessive belief in oneself without proper justification.
Confidence is based on realistic self-assessment and past successes.
Overconfidence involves an inflated sense of one's abilities and underestimating risks.
Confidence leads to taking calculated risks, while overconfidence can lead to reckless behavior.
Confidence is a positive ...
- Q5. What is the difference between hard work and smart work?
I applied via Referral and was interviewed before Jul 2021. There were 6 interview rounds.
(1 Question)
- Q1. Technical questions 25 nos. Written test Thermodynamics Som IC engine Maths Current affairs G.k
(2 Questions)
- Q1. They will ask Only about background details.
- Q2. Last company House Mother father occupation Family background Financial Etc
(1 Question)
- Q1. Technical questions If you have experience they will ask about that. Otherwise Syllabus. 5 to 10 questions
(1 Question)
- Q1. This 4th round which cover in company by sr. Manager or head of department He can Ask about experience or syllabus both.
(1 Question)
- Q1. Only medical in sarvodaya hospital Blood test Eye test ECG Trad mill test Corona test Etc
This is for neem traning program for 3 years.
Interview Preparation Tips
But experience holder should try other side
All facilities good
But
Salary very low
No increament
No esi no pf
I applied via Approached by Company and was interviewed in Mar 2022. There was 1 interview round.
(2 Questions)
- Q1. How many years experience
- Ans.
I have 5 years of experience as an Operator.
I have worked as an Operator for 5 years.
I have gained extensive experience in operating various equipment and machinery.
During my tenure, I have successfully handled complex tasks and ensured smooth operations.
I have received positive feedback from supervisors and colleagues for my efficiency and attention to detail.
- Q2. Two years experience in india Yamaha motor private limited Chennai
Interview Preparation Tips
Interview Questionnaire
3 Questions
- Q1. Vernier caliper least count ?
- Ans.
The least count of a Vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the main scale and the Vernier scale.
It is calculated by dividing the smallest division on the main scale by the total number of divisions on the Vernier scale.
For example, if the smallest division on the main scale is 0.1 mm and the total number of divisions on the ...
- Q2. Micrometer least count?
- Ans.
The least count of a micrometer is the smallest measurement that can be read on the micrometer scale.
The least count is determined by the number of divisions on the micrometer scale and the pitch of the screw.
It is usually expressed in micrometers or millimeters.
For example, if a micrometer has 50 divisions on the scale and the pitch of the screw is 0.5 mm, the least count would be 0.01 mm (0.5 mm / 50 divisions).
- Q3. What is tolerance ?
- Ans.
Tolerance refers to the allowable variation or deviation from a specified dimension or value.
Tolerance is important in manufacturing to ensure that parts and components fit together properly.
It is expressed as a range or limit within which a dimension or value can vary.
Tolerance can be specified for various parameters such as size, shape, weight, temperature, etc.
For example, if a machine part has a tolerance of ±0.1mm...
(2 Questions)
- Q1. About technical questions or past work experience.
- Q2. General knowledge and technical questions and based on manpower manage.
(1 Question)
- Q1. About technical questions
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jun 2022. There were 3 interview rounds.
(7 Questions)
- Q1. Tell me about yourself ?
- Ans. My Name is, qualification and villege
- Q2. What are the qualifications ?
- Q3. Why i keep you company ?
- Ans. Because i am an xperience Person In technical line ....
- Q4. Why do you Want to leave that company ?
- Q5. What do you know about electrical Maintenance ?
- Ans.
Electrical maintenance involves the inspection, repair, and upkeep of electrical systems and equipment.
Electrical maintenance ensures the safe and efficient operation of electrical systems.
It involves regular inspections to identify and address potential issues before they become major problems.
Maintenance tasks may include cleaning, lubricating, and replacing components.
Examples of electrical maintenance include testi...
- Q6. What are the tools of electricity which are essential which we have to carry along with us ?
- Ans.
Essential tools for an electrical technician include a multimeter, wire strippers, pliers, screwdrivers, and a voltage tester.
Multimeter: Used to measure voltage, current, and resistance.
Wire strippers: Used to remove insulation from electrical wires.
Pliers: Used for gripping, bending, and cutting wires.
Screwdrivers: Used for tightening or loosening screws in electrical components.
Voltage tester: Used to check if a cir
- Q7. How Much salary do you want ?
(1 Question)
- Q1. Ok fine after call u back soon
Interview Preparation Tips
American Axle & Manufacturing Interview FAQs
Tell us how to improve this page.
American Axle & Manufacturing Interviews By Designations
- American Axle & Manufacturing Accountant Interview Questions
- American Axle & Manufacturing Assistant Manager Interview Questions
- American Axle & Manufacturing CNC Turning Operator Interview Questions
- American Axle & Manufacturing Graduate Engineer Trainee (Get) Interview Questions
- American Axle & Manufacturing Head Finance and Commercial Interview Questions
- American Axle & Manufacturing Human Resource and Recruitment Coordinator Interview Questions
- American Axle & Manufacturing Lead Software Engineer Interview Questions
- American Axle & Manufacturing Manager - HR & Administration Interview Questions
- Show more
Interview Questions for Popular Designations
- CNC Turning Programmer Interview Questions
- CNC Turning Operator and Setter Interview Questions
- Operator Interview Questions
- Technician Interview Questions
- Electrical Technician Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Production Interview Questions
- Diploma Electrical Engineer Interview Questions
- Show more
American Axle & Manufacturing CNC Turning Operator Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Oprating Engineer
172
salaries
|  ₹1.5 L/yr - ₹7 L/yr |
|
Production Engineer
42
salaries
| ₹1.8 L/yr - ₹8.6 L/yr |
|
Team Lead
29
salaries
| ₹3.5 L/yr - ₹8 L/yr |
|
Maintenance Engineer
20
salaries
| ₹2.7 L/yr - ₹8.5 L/yr |
|
Senior Operations Engineer
20
salaries
| ₹3 L/yr - ₹7.1 L/yr |
Bharat Forge
Samvardhana Motherson Group
Sundaram Clayton
Rane (Madras)
- Home >
- Interviews >
- American Axle & Manufacturing Interview Questions >
- American Axle & Manufacturing CNC Turning Operator Interview Questions
