Filter interviews by
I applied via campus placement at Netaji Subhas Institute of Technology (NSIT) and was interviewed in Nov 2023. There were 2 interview rounds.
Normal maths ,time and work questions
Top trending discussions
I applied via campus placement at Visvesvaraya National Institute of Technology (VNIT), Nagpur and was interviewed in Mar 2024. There were 3 interview rounds.
Just some aptitude questions and technical questions
Steel connections include bolted, welded, and riveted connections. RCC foundations can be shallow, deep, or pile foundations. Lacing and battening are used in steel structures for bracing. Flat slabs are a type of RCC slab without beams.
Types of steel connections: bolted, welded, riveted
Types of RCC foundations: shallow, deep, pile
Lacing and battening used for bracing in steel structures
Flat slabs are RCC slabs without
posted on 9 Feb 2024
I applied via LinkedIn and was interviewed in Jan 2024. There were 2 interview rounds.
Job lanxess apperetence and freezer
posted on 18 Feb 2023
I applied via campus placement at GH Patel College of Engineering and Technology, Vallabh Vidyanagar and was interviewed in Jan 2023. There were 3 interview rounds.
It was 1 hour 45 min test where 40 question from technical side and 50 questions from aptitude. My engineering was chemical engineering so in technical part there were questions from different semester subjects like fluid operation, mass transfer, thermodynamics etc.
In case of aptitude it was logical reasoning, verbal reasoning, algebra. The aptitude was quite moderate level and technical was easy in my opinion.
Distillation is a process of separating components of a mixture based on their boiling points.
It involves heating the mixture to vaporize the component with the lowest boiling point.
The vapor is then condensed and collected as a separate liquid.
This process is commonly used in the production of alcoholic beverages, fuels, and essential oils.
Fractional distillation is a variation of distillation that is used to separate...
Relative volatility is a measure of the difference in vapor pressures of two components in a mixture.
It is used in distillation processes to determine the separation efficiency of a mixture.
Higher relative volatility indicates easier separation of components.
It is calculated as the ratio of vapor pressures of the two components.
For example, in the separation of ethanol and water, ethanol has a higher relative volatilit
Equal relative volatility means no separation is possible in distillation.
Relative volatility is the ratio of vapor pressures of two components in a mixture.
When it is equal to 1, the vapor pressures of both components are equal.
This means they will boil and condense at the same temperature, making separation impossible.
Distillation relies on the difference in boiling points of components to separate them.
Therefore, di...
Extractive distillation is a process used to separate two or more components from a mixture using a solvent.
It involves adding a solvent to the mixture to form two liquid phases.
The solvent selectively removes one component from the mixture, leaving the other behind.
The solvent and the removed component are then separated from each other by distillation.
Examples include separating ethanol from water using benzene as a ...
Types of NPSH and their differences
Net Positive Suction Head (NPSH) is the difference between the absolute pressure at the pump suction and the vapor pressure of the liquid being pumped.
Types of NPSH are available NPSH (NPSHa) and required NPSH (NPSHr).
NPSHa is the amount of NPSH available at the pump suction, while NPSHr is the amount of NPSH required by the pump.
The difference between NPSHa and NPSHr determines wheth...
To increase NPSHr when NPSHa is more, reduce the impeller diameter or increase the speed of the pump.
Reduce impeller diameter
Increase pump speed
posted on 12 Sep 2023
I applied via Campus Placement and was interviewed in Mar 2023. There were 3 interview rounds.
Most questions were about thermodynamics,heat transfer,fluid mechanics for chemical engineering
posted on 8 Sep 2022
I applied via campus placement at Maharishi Markandeshwar (Deemed to be University) and was interviewed in Mar 2022. There were 4 interview rounds.
1 hour test consisting of a general aptitude test
After completing the aptitude test I was immediately referred to the coding test codding test has 3 easy questions and sufficient time to complete them!
Count frequency of elements in an array of strings
Create a dictionary to store element frequency
Loop through array and update dictionary
Return dictionary
I come from a diverse family background with a mix of cultures and traditions.
My parents are from different countries, so I have been exposed to different languages and customs.
Growing up, I celebrated holidays and festivals from both sides of my family.
This diverse background has taught me to appreciate different perspectives and adapt to new environments.
Yes, I am willing to relocate for the Graduate Engineer Trainee position.
I am open to moving to a new location for career growth and opportunities.
I understand that relocation may be necessary to work on specific projects or assignments.
I am flexible and adaptable to new environments and cultures.
I am excited about the prospect of exploring new cities and experiencing different work settings.
I am committed to my profes...
I applied via campus placement at Visvesvaraya National Institute of Technology (VNIT), Nagpur and was interviewed in Mar 2024. There were 3 interview rounds.
Just some aptitude questions and technical questions
Steel connections include bolted, welded, and riveted connections. RCC foundations can be shallow, deep, or pile foundations. Lacing and battening are used in steel structures for bracing. Flat slabs are a type of RCC slab without beams.
Types of steel connections: bolted, welded, riveted
Types of RCC foundations: shallow, deep, pile
Lacing and battening used for bracing in steel structures
Flat slabs are RCC slabs without
posted on 13 Jan 2025
I applied via Campus Placement and was interviewed before Jan 2024. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Key Account Manager
25
salaries
| ₹7 L/yr - ₹16 L/yr |
Service Engineer
24
salaries
| ₹2.2 L/yr - ₹5 L/yr |
Distribution Officer
19
salaries
| ₹3.1 L/yr - ₹8.4 L/yr |
Manager
18
salaries
| ₹15 L/yr - ₹30.7 L/yr |
Production Engineer
18
salaries
| ₹1 L/yr - ₹8.5 L/yr |
Linde India
Praxair
Airproducts
Taiyo Nippon Sanso Corporation