Upload Button Icon Add office photos

Filter interviews by

Advics North India Production Associate Interview Questions and Answers

Updated 24 Mar 2022

Advics North India Production Associate Interview Experiences

1 interview found

Round 1 - HR 

(5 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Tell me about yourself.
  • Q5. What are your strengths and weaknesses?

Interview Preparation Tips

Interview preparation tips for other job seekers - This company is good for only staff person, not for operator and associate, increament is very bad for operators, HR says we do 10-12% increament every year,but 7-8% maybe done.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Where are you living?
  • Q2. Why are you leaving your last company?
Round 3 - Technical 

(4 Questions)

  • Q1. Circuit diagram of relay holding.
  • Ans. 

    A relay holding circuit diagram is used to keep the relay in the energized state even after the control signal is removed.

    • The circuit typically includes a holding contact that maintains the relay coil energized.

    • A latching relay can also be used for holding without continuous power supply.

    • Examples: ladder logic diagram with a holding contact, latching relay circuit diagram.

  • Answered by AI
  • Q2. What is PNP and NPN
  • Ans. 

    PNP and NPN are types of bipolar junction transistors commonly used in electronic circuits.

    • PNP transistor has a layer of N-type semiconductor between two layers of P-type semiconductor, while NPN transistor has a layer of P-type semiconductor between two layers of N-type semiconductor.

    • In a PNP transistor, current flows from the emitter to the base and then to the collector, while in an NPN transistor, current flows fro...

  • Answered by AI
  • Q3. How many type of sensor?
  • Ans. 

    There are various types of sensors used for different purposes.

    • Temperature sensors (e.g. thermocouples, thermistors)

    • Pressure sensors (e.g. piezoelectric sensors)

    • Motion sensors (e.g. accelerometers, gyroscopes)

    • Proximity sensors (e.g. ultrasonic sensors)

    • Light sensors (e.g. photodiodes, phototransistors)

  • Answered by AI
  • Q4. What is PLC and full form?
  • Ans. 

    PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.

    • PLC is used to control machinery in manufacturing processes, such as assembly lines, robotic devices, or any activity that requires high reliability control.

    • It is programmed using a specialized computer language, typically ladder logic or function block diagram.

    • PLCs are commonly used in industrie...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Your rlc circuit must be very strong.

Skills evaluated in this interview

I applied via Company Website

Round 1 - Technical 

(6 Questions)

  • Q1. What is mean of TTR & why required for powder coating process ?
  • Ans. 

    TTR stands for Total Thickness Range and is required for powder coating process to ensure proper adhesion and durability.

    • TTR is the range of thickness of the substrate and any coatings applied to it

    • It is important for powder coating as it ensures proper adhesion and durability

    • If the TTR is too large, the coating may not adhere properly or may crack and peel over time

    • Examples of substrates with varying TTR include alumi

  • Answered by AI
  • Q2. What is mean of detection & prevention pokayoke?
  • Ans. 

    Detection and prevention poka-yoke refers to the use of techniques to identify and prevent errors in a process.

    • Poka-yoke is a Japanese term for mistake-proofing

    • Detection poka-yoke involves identifying errors as they occur

    • Prevention poka-yoke involves designing processes to prevent errors from occurring

    • Examples of poka-yoke include using checklists, color-coding, and physical barriers

    • Poka-yoke can improve quality, reduc

  • Answered by AI
  • Q3. Which condition PH decrease in conversion coating?
  • Ans. 

    Decrease in pH can occur due to various factors in conversion coating.

    • Decrease in pH can be caused by the addition of an acid or acidic solution.

    • Presence of reactive metals in the coating can lead to a decrease in pH.

    • Contamination by organic materials or impurities can also lower the pH.

    • Chemical reactions during the conversion coating process may result in pH decrease.

    • Examples of conversion coatings include phosphating

  • Answered by AI
  • Q4. How to prepared 0.1 N H2so4 & Naoh ?
  • Ans. 

    To prepare 0.1 N H2SO4 & NaOH, calculate the required amount of solute and dissolve it in distilled water.

    • Calculate the molar mass of H2SO4 and NaOH

    • Determine the required amount of solute using the formula: N = (W/M) x (1000/V)

    • Dissolve the calculated amount of solute in distilled water to make 1 liter of solution

    • Standardize the solution using a primary standard

    • Use a burette to measure the volume of solution needed for

  • Answered by AI
  • Q5. How to cross verify 0.1 normality H2so4?
  • Ans. 

    To cross verify 0.1 normality H2SO4, use a standard solution of NaOH and an indicator.

    • Prepare a standard solution of NaOH of known concentration.

    • Add a few drops of an indicator such as phenolphthalein to the H2SO4 solution.

    • Titrate the H2SO4 solution with the NaOH solution until the endpoint is reached.

    • The endpoint is when the indicator changes color, indicating that all the H2SO4 has reacted with the NaOH.

    • Calculate the...

  • Answered by AI
  • Q6. How to prepared ph buffer solution as per defined standard in tablet?
  • Ans. 

    Prepare a pH buffer solution as per defined standard in tablet.

    • Determine the required pH value and buffer capacity

    • Select the appropriate buffer system and calculate the required amounts of buffer components

    • Dissolve the buffer components in water and adjust the pH as necessary

    • Check the pH and adjust if necessary

    • Filter the solution and store in a clean container

    • Use a calibrated pH meter to verify the pH of the solution

  • Answered by AI
Round 2 - Assignment 

Interview Preparation Tips

Interview preparation tips for other job seekers - As for as my view is concern best performance maintaining in plant
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. If vacancy is there then they will definitely hire as a GAT or NEEEM or NAPS trainee.
  • Q2. Self introduction Which department you like to work

Interview Preparation Tips

Interview preparation tips for other job seekers - Before going to interview Ask anyone working in the company is there any vacancy. (Which department you want?)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. About CNC Machining Basic Coding Technical questions Personal information
  • Q2. Self introduction Speaking confidance

Interview Preparation Tips

Interview preparation tips for other job seekers - Study about technical questions
Good dressing
Self confidence
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Self introduction
  • Q2. Technical questions
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. 5s questions and self introduction
Round 3 - Group Discussion 

Self introduction and education and family background and 5s

Interview Preparation Tips

Topics to prepare for Rane (Madras) Junior Engineer interview:
  • Mechanical Maintenance
Interview preparation tips for other job seekers - Easy to interview and good appr5
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Related to department
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Campus Placement and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basics of mechanical engineering
Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
-

I applied via Walk-in and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Indiual handling the shift
  • Q2. Any issue handling the shift ownership
  • Ans. 

    Shift ownership issues can arise due to miscommunication, lack of accountability, or unclear procedures.

    • Ensure clear communication about shift responsibilities and handover procedures

    • Establish accountability among team members for their assigned shifts

    • Implement a system for tracking shift ownership and handovers

    • Address any conflicts or misunderstandings promptly to prevent escalation

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
-

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General questions related self introduction
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions related to production process

Advics North India Interview FAQs

How many rounds are there in Advics North India Production Associate interview?
Advics North India interview process usually has 1 rounds. The most common rounds in the Advics North India interview process are HR.

Tell us how to improve this page.

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 328 Interviews
UNO Minda Interview Questions
4.0
 • 168 Interviews
AmbitionBox Interview Questions
4.9
 • 153 Interviews
HCL Infosystems Interview Questions
3.9
 • 140 Interviews
Webdew Interview Questions
4.5
 • 106 Interviews
Data Entry Interview Questions
4.1
 • 96 Interviews
Gabriel India Interview Questions
4.2
 • 95 Interviews
View all
Advics North India Production Associate Salary
based on 4 salaries
₹2 L/yr - ₹3 L/yr
44% less than the average Production Associate Salary in India
View more details

Advics North India Production Associate Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

3.0

Skill development

2.0

Work-life balance

3.0

Salary

4.0

Job security

3.0

Company culture

2.0

Promotions

2.0

Work satisfaction

Explore 1 Review and Rating
Assistant
27 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Assistant
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
15 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
15 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Advics North India with

Bosch

4.2
Compare

UNO Minda

4.0
Compare

ZF Commercial Vehicle Control Systems

3.9
Compare

ZF Steering Gear

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview