Aavantika Gas Junior Technician Interview Questions and Answers

A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy into hydrodynamic energy.

• Centrifugal pumps are commonly used in various industries, including oil and gas, water treatment, and HVAC systems.

• They work by using an impeller to rotate and create a centrifugal force, which pushes the fluid towards the pump outlet.

• The fluid enters the pump through the suction inlet an...read more

There are several types of valves used in mechanical systems.

• Gate valve: used to control the flow of fluid by lifting or lowering a gate

• Ball valve: uses a ball to control the flow of fluid

• Butterfly valve: uses a disc to control the flow of fluid

• Check valve: allows fluid to flow in one direction only

• Globe valve: controls flow by raising or lowering a plug

• Needle valve: uses a long, tapered needle to control flow

• Diaphragm...read more

A ball valve is a type of valve that uses a ball-shaped disc to control the flow of fluid through a pipe.

• Ball valves are commonly used in industrial applications for their durability and reliability.

• They have a simple design, consisting of a ball with a hole in the middle that can be rotated to control the flow of fluid.

• Ball valves can be either full port or reduced port, depending on the size of the ball and the hole.

• ...read more

A shell and tube heat exchanger is a device used to transfer heat between two fluids.

• Consists of a shell (outer vessel) and tubes (inner vessels)

• One fluid flows through the tubes while the other flows around the tubes in the shell

• Heat is transferred from one fluid to the other through the tube walls

• Commonly used in industries such as power generation, chemical processing, and HVAC

• Example: Cooling water in a power plant...read more

PPE stands for Personal Protective Equipment.

• PPE is equipment worn to minimize exposure to hazards that may cause serious workplace injuries or illnesses.

• Examples of PPE include safety glasses, gloves, hard hats, respirators, and safety shoes.

• PPE should be selected based on the specific hazards present in the workplace.

• Employers are responsible for providing PPE to their employees and ensuring that it is properly maint...read more

An axial flow pump is a type of pump that uses an impeller to create fluid flow parallel to the pump shaft.

• Axial flow pumps are commonly used in applications where large volumes of fluid need to be moved at low to medium pressures.

• They are often used in irrigation systems, drainage systems, and cooling systems.

• The impeller of an axial flow pump has blades that resemble a propeller, which helps in generating the axial f...read more

A check valve is a mechanical device that allows fluid to flow in one direction only.

• Check valves are commonly used in plumbing systems to prevent backflow of water.

• They are also used in hydraulic systems to prevent reverse flow of fluid.

• Check valves can be classified into different types such as swing check valves, lift check valves, and ball check valves.

• These valves work by using a disc or a ball that opens and clos...read more

Positive displacement pump is a type of pump that moves fluid by trapping a fixed amount of it and then forcing it into the discharge pipe.

• Positive displacement pumps operate by trapping a specific volume of fluid and then forcing it into the discharge pipe.

• These pumps are capable of generating high pressures and are used in various industries such as oil and gas, chemical, and food processing.

• Examples of positive disp...read more

A globe valve is a type of valve used to regulate or stop the flow of fluid in a pipeline.

• It has a spherical body with an internal baffle that directs the flow of fluid.

• The valve can be opened or closed by rotating the stem.

• It provides a tight seal when closed, preventing leakage.

• Globe valves are commonly used in applications where throttling or regulating flow is required.

• They are often found in water systems, steam s...read more

PPE stands for Personal Protective Equipment. It refers to protective clothing, helmets, goggles, or other equipment designed to protect the wearer's body from injury or infection.

• PPE is used in various industries to protect workers from hazards.

• Examples of PPE include safety glasses, gloves, hard hats, respirators, and earplugs.

• PPE should be selected based on the specific hazards present in the workplace.

• Proper traini...read more

AI/AO and DI/DO stand for Analog Input/Output and Digital Input/Output, respectively.

• AI/AO refers to signals that are continuous and can have infinite values, like voltage or current.

• DI/DO refers to signals that are discrete and can only have two states, like on/off or high/low.

• Examples of AI/AO devices include temperature sensors and pressure transducers.

• Examples of DI/DO devices include push buttons and relays.

Ladder Logic is a programming language used in industrial control systems to create logic circuits for controlling machinery and processes.

• Ladder Logic is based on relay logic and uses graphical symbols to represent logic functions.

• It consists of rungs, which are horizontal lines where input and output devices are connected using logic symbols.

• Ladder Logic is commonly used in Programmable Logic Controllers (PLCs) for a...read more

I have extensive experience in oil and gas construction.

• Managed construction projects for oil and gas pipelines

• Coordinated with contractors and subcontractors to ensure project completion on time and within budget

• Implemented safety protocols to ensure compliance with industry regulations

• Experience with welding, piping, and instrumentation

• Familiarity with industry standards and codes such as ASME, API, and ANSI

I have extensive technical experience in the Oil and Gas industry.

• I have worked on various projects related to drilling, production, and refining.

• I am familiar with industry standards and regulations such as API and ASME codes.

• I have experience in designing and implementing safety measures to prevent accidents and ensure compliance.

• I have worked with various equipment and technologies such as pumps, compressors, and pi...read more