National Institute of Technology (NIT), Rourkela
Rourkela, Orissa
Your seniors at National Institute of Technology (NIT), Rourkela were your true well-wishers, they shared their placement interview questions for you. 🙏
AmbitionBox
Search
Reviews
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Filter interviews byCompany (1)
Designation
Interview Type
Clear all
ITCNational Institute of Technology (NIT), Rourkela Placement Interview Questions
Updated
17 Jan 2025
2 interviews found
Interview experience
Good
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Yes, I joined the company
I applied via Campus Placement and was interviewed before Feb 2023.
1 Interview Round
1
One-on-one Round (2 Questions)
- Q1. How does transmission line work
- Q2. Tell us about the projects taken by you in your college
Interview Preparation Tips
Interview preparation tips for other job seekers - Be confident and showcase all your achievements in a well fashioned manner
6 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: The first round was a pen and paper-based test. There were no specific problems that bothered me in the written test. I found the questions to be fairly decent and somewhat challenging. The questions in the 'quantitative ability' section were a bit on the tougher side, while the 'logical reasoning' and 'verbal ability' questions were quite easy. However, some questions were phrased slightly ambiguously and led to some confusion during the test.
Tips: For getting through the written aptitude tests, be sure to practice a lot of questions of different kinds and within a certain time limit. The earlier you start, the better it is. Calculation speeds matter a lot in this regard. Personally, I had just solved 15-20 questions in total, each question of a different kind, before the written test. You need to assess your specific strengths and strike the right balance between speed and accuracy.
Duration: 60 minutes
Total Questions: 45
Round: Group Discussion
Experience: I didn't resort to any elaborate preparation to get through the GD round. To start off, I was a bit nervous about this particular round. So, I focused on speaking at least twice during the GD round and concentrated on accumulating the views of other people and then putting forth my opinion. I avoided getting into a direct conflict with any of my group members and tried putting my point across while maintaining the harmony of the group. In the end, a majority of my group got selected for the subsequent rounds.
Tips: For the GD rounds, try to be in touch with day-to-day matters and have a basic idea about how different topics are shaping up all around the world. Focus on making valid and reasonable points in the GD and don't just blabber for the sake of speaking. Try to be a part of the group and the solution making process. The groups that have better understanding and consistency in the GD rounds are more likely to experience less eliminations.
Duration: 20 minutes
Round: HR Interview
Experience: The third and fourth rounds were personal interviews (PI) and both were elimination rounds. These rounds consisted of both technical and HR questions. For the HR questions, I ploughed ITC's official website and gathered information related to the work that they do and determined how my interests and abilities best suited their purpose. I focused on giving clear answers and avoided inconsistencies and confusions. The HR questions were quite straightforward and the interviewers were very friendly. I was asked about my hobbies and the co-curricular and extra-curricular activities that I was involved in. They also sought to know if I had been involved in any leadership positions before and how I had managed my team. Lastly, they wanted to know my motivation behind applying for the company and asked me what role I wanted to take up if I was selected for the job.
Tips: For the HR interview, try to have a clear idea as to why you are applying for the given company and avoid inconsistencies in your statements. Make a rough sketch about the person you are, including your strengths and weaknesses and be presentable. In fewer words, stay simple and know yourself.
Round: Technical Interview
Experience: The third and fourth rounds were personal interviews (PI) and both were elimination rounds. These rounds consisted of both technical and HR questions. For countering the technical questions, I went through the major subjects and focused on the concepts that were most likely to be asked in an interview. I had done two summer research internships in my second year and third year (one in IIT Kharagpur and another in IIT-BHU). So, I went through the details of the work that I had done during those two internships and prepared myself for possible questions in that regard. I did a similar kind of preparation regarding the projects that I had been a part of within the institute. I was asked very detailed questions related to my internships and my other project works. They wanted to determine whether I was aware of the practical applications and the minute details of the projects that I had worked on. Apart from that, I was asked numerous technical questions related to 'Mass Transfer', 'Heat Transfer', 'Thermodynamics', 'Nanotechnology', etc. Overall, the technical interviews were quite extensive and rigorous.
Tips: Emphasize on conceptual clarity and applications rather than memorizing definitions or formulae. Go through the topics you have worked on during your internships and institute-level projects and have a thorough idea about the theory behind them and their importance and applicability on an industrial scale. Also, try to identify the core subjects that you are strong in and prepare accordingly, because they may ask you to select a subject of your choice and you would be asked the majority of questions from that part.
Round: Behavioural Interview
Experience: This was the fifth and the final round of the overall process and consisted of a 'Skype' interview with two Chief Technical Officers (CTOs) of ITC-PCPB. This was a 15-20 minutes long affair and was basically a 'fit interview'. However, this also turned out to be an elimination round and only two out of four candidates were eventually selected. I was asked a variety of questions related to my daily life and the points that I had mentioned in my CV. I was also asked what my expectations were if I was selected for the job and where I see myself 4-5 years down the line after I join the company. Their reactions didn't seem very assuring or pleasing and I was quite apprehensive; however, things eventually went my way!
Tips: Be confident and know how to defend yourself without being aggressive or rude. You will be put under stress during the interview and the interviewers would try to get under your skin and seem to disagree with you on many points. Therefore, try to stay calm and stick to your point regardless of their disagreements. However, take care not to be rude or go overboard with your body language. Basically, your stress-handling capacity and your response under such situations are evaluated.
General Tips: Assess yourself and determine which sector your abilities are best suited for and what kind of a job you would be interested in and satisfied with. Thereafter, try to gather as much information as possible about the sector that you would be opting for, including the job profiles and growth opportunities that are available. On the day of company visit, dress up crisply and look smart. Also, try to maintain a smiling face throughout and look energetic; no interviewer wants to see drooping shoulders and slacking expressions.
Skill Tips: Think clearly and present your views confidently and efficiently. Improve your communication skills and your technical knowledge, because the latter matters a lot. Lastly, try to convince the interviewers about your leadership skills and your ability to manage a team, while being under stress. In a nutshell, have a very clear idea about what you are getting into and try to show your best side and highlight your strengths.
Skills: Behavioural Skills, Clarity Of Concepts, Ability To Work In A Team, Leadership Skills, Knowledge Of Projects Undertaken, Internship Experience, Knowledge Gained Through Recent Research Project, Ability To Cope Up With Stress, Technical Understanding, Clarity In Arguments, Verbal Communication Skills, Group Discussion Skills, Verbal Ability, Logical Reasoning, Quantitative Aptitude
College Name: NIT Rourkela
Motivation: ITC is a pretty well-known brand and has been in existence for over a century now. Moreover, it's a core company and fits well with my interests. I am interested in doing research in an industrial environment and I am hopeful of getting a chance to work in the R&D division of the company in the future. To top it off, the compensation is pretty good too! Hence, ITC seemed to be the perfect option for me.
Experience: The first round was a pen and paper-based test. There were no specific problems that bothered me in the written test. I found the questions to be fairly decent and somewhat challenging. The questions in the 'quantitative ability' section were a bit on the tougher side, while the 'logical reasoning' and 'verbal ability' questions were quite easy. However, some questions were phrased slightly ambiguously and led to some confusion during the test.
Tips: For getting through the written aptitude tests, be sure to practice a lot of questions of different kinds and within a certain time limit. The earlier you start, the better it is. Calculation speeds matter a lot in this regard. Personally, I had just solved 15-20 questions in total, each question of a different kind, before the written test. You need to assess your specific strengths and strike the right balance between speed and accuracy.
Duration: 60 minutes
Total Questions: 45
Round: Group Discussion
Experience: I didn't resort to any elaborate preparation to get through the GD round. To start off, I was a bit nervous about this particular round. So, I focused on speaking at least twice during the GD round and concentrated on accumulating the views of other people and then putting forth my opinion. I avoided getting into a direct conflict with any of my group members and tried putting my point across while maintaining the harmony of the group. In the end, a majority of my group got selected for the subsequent rounds.
Tips: For the GD rounds, try to be in touch with day-to-day matters and have a basic idea about how different topics are shaping up all around the world. Focus on making valid and reasonable points in the GD and don't just blabber for the sake of speaking. Try to be a part of the group and the solution making process. The groups that have better understanding and consistency in the GD rounds are more likely to experience less eliminations.
Duration: 20 minutes
Round: HR Interview
Experience: The third and fourth rounds were personal interviews (PI) and both were elimination rounds. These rounds consisted of both technical and HR questions. For the HR questions, I ploughed ITC's official website and gathered information related to the work that they do and determined how my interests and abilities best suited their purpose. I focused on giving clear answers and avoided inconsistencies and confusions. The HR questions were quite straightforward and the interviewers were very friendly. I was asked about my hobbies and the co-curricular and extra-curricular activities that I was involved in. They also sought to know if I had been involved in any leadership positions before and how I had managed my team. Lastly, they wanted to know my motivation behind applying for the company and asked me what role I wanted to take up if I was selected for the job.
Tips: For the HR interview, try to have a clear idea as to why you are applying for the given company and avoid inconsistencies in your statements. Make a rough sketch about the person you are, including your strengths and weaknesses and be presentable. In fewer words, stay simple and know yourself.
Round: Technical Interview
Experience: The third and fourth rounds were personal interviews (PI) and both were elimination rounds. These rounds consisted of both technical and HR questions. For countering the technical questions, I went through the major subjects and focused on the concepts that were most likely to be asked in an interview. I had done two summer research internships in my second year and third year (one in IIT Kharagpur and another in IIT-BHU). So, I went through the details of the work that I had done during those two internships and prepared myself for possible questions in that regard. I did a similar kind of preparation regarding the projects that I had been a part of within the institute. I was asked very detailed questions related to my internships and my other project works. They wanted to determine whether I was aware of the practical applications and the minute details of the projects that I had worked on. Apart from that, I was asked numerous technical questions related to 'Mass Transfer', 'Heat Transfer', 'Thermodynamics', 'Nanotechnology', etc. Overall, the technical interviews were quite extensive and rigorous.
Tips: Emphasize on conceptual clarity and applications rather than memorizing definitions or formulae. Go through the topics you have worked on during your internships and institute-level projects and have a thorough idea about the theory behind them and their importance and applicability on an industrial scale. Also, try to identify the core subjects that you are strong in and prepare accordingly, because they may ask you to select a subject of your choice and you would be asked the majority of questions from that part.
Round: Behavioural Interview
Experience: This was the fifth and the final round of the overall process and consisted of a 'Skype' interview with two Chief Technical Officers (CTOs) of ITC-PCPB. This was a 15-20 minutes long affair and was basically a 'fit interview'. However, this also turned out to be an elimination round and only two out of four candidates were eventually selected. I was asked a variety of questions related to my daily life and the points that I had mentioned in my CV. I was also asked what my expectations were if I was selected for the job and where I see myself 4-5 years down the line after I join the company. Their reactions didn't seem very assuring or pleasing and I was quite apprehensive; however, things eventually went my way!
Tips: Be confident and know how to defend yourself without being aggressive or rude. You will be put under stress during the interview and the interviewers would try to get under your skin and seem to disagree with you on many points. Therefore, try to stay calm and stick to your point regardless of their disagreements. However, take care not to be rude or go overboard with your body language. Basically, your stress-handling capacity and your response under such situations are evaluated.
General Tips: Assess yourself and determine which sector your abilities are best suited for and what kind of a job you would be interested in and satisfied with. Thereafter, try to gather as much information as possible about the sector that you would be opting for, including the job profiles and growth opportunities that are available. On the day of company visit, dress up crisply and look smart. Also, try to maintain a smiling face throughout and look energetic; no interviewer wants to see drooping shoulders and slacking expressions.
Skill Tips: Think clearly and present your views confidently and efficiently. Improve your communication skills and your technical knowledge, because the latter matters a lot. Lastly, try to convince the interviewers about your leadership skills and your ability to manage a team, while being under stress. In a nutshell, have a very clear idea about what you are getting into and try to show your best side and highlight your strengths.
Skills: Behavioural Skills, Clarity Of Concepts, Ability To Work In A Team, Leadership Skills, Knowledge Of Projects Undertaken, Internship Experience, Knowledge Gained Through Recent Research Project, Ability To Cope Up With Stress, Technical Understanding, Clarity In Arguments, Verbal Communication Skills, Group Discussion Skills, Verbal Ability, Logical Reasoning, Quantitative Aptitude
College Name: NIT Rourkela
Motivation: ITC is a pretty well-known brand and has been in existence for over a century now. Moreover, it's a core company and fits well with my interests. I am interested in doing research in an industrial environment and I am hopeful of getting a chance to work in the R&D division of the company in the future. To top it off, the compensation is pretty good too! Hence, ITC seemed to be the perfect option for me.
Campus Placement Interview Questions at Top Colleges
- Indian Institute of Technology (IIT), Chennai Placement Interview Questions
- Maharaja Agrasen Institute of Technology, Delhi Placement Interview Questions
- National Institute of Technology (NIT), Warangal Placement Interview Questions
- Indian Institute of Management (IIM), Lucknow Placement Interview Questions
- Indian Institute of Technology (IIT), Kanpur Placement Interview Questions
- Show more
Recently Viewed
JOBS
Gushwork
14 jobs
JOBS
Browse jobs
Discover jobs you love
JOBS
GroundTruth
33 jobs
PHOTOS
Growisto
7 office photos
INTERVIEWS
MS Education Academy
No Interviews
SALARIES
Triumphant Institute of Management Education
SALARIES
Commonwealth Bank of Australia, India
INTERVIEWS
Commonwealth Bank of Australia, India
No Interviews
SALARIES
Triumphant Institute of Management Education
JOBS
Commonwealth Bank of Australia, India
No Jobs
- Home >
- colleges >
- national institute of technology nit rourkela placement interview questions
Calculate your in-hand salary
Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and
get your in-hand salary
Feedback
