AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Western India Forgings Interview Questions and Answers
6 Interview questions
Common software for 2D & 3D modeling include AutoCAD, SolidWorks, and Blender.
AutoCAD is widely used for 2D drafting and design in various industries.
SolidWorks is popular for 3D modeling and mechanical design.
Blender is a free and open-source software for 3D modeling, animation, and rendering.
IS 9175 is the Indian standard used for forging design.
IS 9175: 1979 is the Indian standard code for forging design.
It covers various aspects of forging design such as material selection, die design, and process parameters.
The standard provides guidelines for designing forgings to ensure quality and performance.
Compliance with IS 9175 is important for ensuring the safety and reliability of forged components.
Exampl...
Yes, I am familiar with costing and have experience in analyzing and managing costs for design projects.
I have experience in analyzing material costs, labor costs, and overhead costs for design projects.
I am proficient in using costing tools and software to accurately estimate project costs.
I have successfully managed budgets and costs for multiple design projects in the past.
I am skilled in identifying cost-savin...
Yes, I am familiar with forging simulation software such as DEFORM and Simufact.
DEFORM and Simufact are popular forging simulation software used in the industry.
These software help in predicting and optimizing the forging process to improve efficiency and quality.
They simulate the behavior of materials during the forging process to identify potential issues and optimize the design.
Users can analyze factors like ma...
Yes, I can read engineering drawings.
I have experience reading and interpreting engineering drawings in my previous roles.
I am familiar with common symbols, dimensions, and annotations used in engineering drawings.
I can accurately interpret technical information and translate it into actionable tasks.
For example, I have worked on projects where I needed to refer to engineering drawings to troubleshoot issues or ma...
1 inch is equal to 25.4 millimeters.
1 inch = 25.4 mm
To convert inches to millimeters, multiply by 25.4
For example, 2 inches is equal to 50.8 mm (2 x 25.4)
Western India Forgings Interview Experiences
3 interviews found
Selected
- Q1. Quality assurance
- Q2. Questions: 1)Die inspection and plaster layout inspection
- Q3. Die crack problem ka
- Q4. Job forgings crack ka..
- Q5. Die layout inspection
- Q6. Die blowhole ka
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Oct 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Technical questions
- Q2. How much is 1 inch in mm?
- Ans.
1 inch is equal to 25.4 millimeters.
1 inch = 25.4 mm
To convert inches to millimeters, multiply by 25.4
For example, 2 inches is equal to 50.8 mm (2 x 25.4)
- Q3. Can u read the engineering drawings?
- Ans.
Yes, I can read engineering drawings.
I have experience reading and interpreting engineering drawings in my previous roles.
I am familiar with common symbols, dimensions, and annotations used in engineering drawings.
I can accurately interpret technical information and translate it into actionable tasks.
For example, I have worked on projects where I needed to refer to engineering drawings to troubleshoot issues or make de...
(1 Question)
- Q1. Normal with technical questions
Interview Preparation Tips
Final round was with main director..... Wow what a person!!!! He motivated me even if i was interviewer.... Best person in whole company.
DEBABRATA SAHOO
Selected
I applied via Approached by Company and was interviewed before Nov 2023. There were 2 interview rounds.
(6 Questions)
- Q1. Which India standard use for forging design?
- Ans.
IS 9175 is the Indian standard used for forging design.
IS 9175: 1979 is the Indian standard code for forging design.
It covers various aspects of forging design such as material selection, die design, and process parameters.
The standard provides guidelines for designing forgings to ensure quality and performance.
Compliance with IS 9175 is important for ensuring the safety and reliability of forged components.
Examples of...
- Q2. Which software use for 2D & 3D modeling?
- Ans.
Common software for 2D & 3D modeling include AutoCAD, SolidWorks, and Blender.
AutoCAD is widely used for 2D drafting and design in various industries.
SolidWorks is popular for 3D modeling and mechanical design.
Blender is a free and open-source software for 3D modeling, animation, and rendering.
- Q3. Do you know any forging simulation software?
- Ans.
Yes, I am familiar with forging simulation software such as DEFORM and Simufact.
DEFORM and Simufact are popular forging simulation software used in the industry.
These software help in predicting and optimizing the forging process to improve efficiency and quality.
They simulate the behavior of materials during the forging process to identify potential issues and optimize the design.
Users can analyze factors like materia...
- Q4. How many work experience do you have?
- Ans.
I have 5 years of work experience in design roles.
5 years of work experience in design roles
Experience in leading design projects
Proficient in design software such as Adobe Creative Suite
Strong understanding of design principles and trends
- Q5. What is the your role in your company?
- Q6. Do you know costing?
- Ans.
Yes, I am familiar with costing and have experience in analyzing and managing costs for design projects.
I have experience in analyzing material costs, labor costs, and overhead costs for design projects.
I am proficient in using costing tools and software to accurately estimate project costs.
I have successfully managed budgets and costs for multiple design projects in the past.
I am skilled in identifying cost-saving opp...
(3 Questions)
- Q1. All about your previous company?
- Q2. Who give reference?
- Q3. What is Notice period and current CTC?
Interview Preparation Tips
- NX, AutoCAD & Forge
Top trending discussions
Interview questions from similar companies
Senior Engineer Interview Questions & Answers
Thriveni Sainik Mining
Sudhir Kumar
posted on 13 Dec 2024
Selected
I appeared for an interview in Apr 2024, where I was asked the following questions.
- Q1. What does it mean about engine stall & how it conduct??
- Ans.
Engine stall refers to a sudden loss of power in an engine, often due to fuel or air supply issues.
An engine stall occurs when the engine stops running unexpectedly.
Common causes include fuel starvation, air intake issues, or electrical failures.
For example, a car may stall if it runs out of fuel or if the fuel pump fails.
Stalling can also happen in aircraft engines during takeoff or landing due to improper throttle ma...
- Q2. Hydraulic circuit.
Selected
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Explain current roles and responsibilities.
- Q2. Explain the points mentioned in cv from starting to end.
- Ans.
I have highlighted key points in my CV from the beginning to the end.
Started with educational background and relevant qualifications.
Highlighted work experience and key achievements in each role.
Included skills and competencies that are relevant to the Deputy Manager position.
Mentioned any additional certifications or training programs completed.
Concluded with a brief summary of career goals and aspirations.
Provided co...
- Q3. What do you have to offer for this organization?
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(5 Questions)
- Q1. Automation related questions basic of PLC like AB and Siemens make plc,encoder,pannel min earthing voltage, scada,starter software
- Q2. Electrical maintenance related questions basics
- Q3. What Is MTTR and MTBF
- Ans.
MTTR stands for Mean Time To Repair and MTBF stands for Mean Time Between Failures.
MTTR is the average time taken to repair a failed component or system.
MTBF is the average time between failures of a component or system.
MTTR is calculated as total downtime divided by the number of failures.
MTBF is calculated as total uptime divided by the number of failures.
For example, if a system has an MTTR of 2 hours and an MTBF of...
- Q4. Substation related questions basics
- Q5. What is data type,string in plc
- Ans.
Data type string in PLC is used to store alphanumeric characters or text data.
String data type is used to store text data in PLC programming.
Strings can be used to store alphanumeric characters, words, sentences, etc.
Example: STRING name := 'John Smith';
Skills evaluated in this interview
Selected
I appeared for an interview in May 2025, where I was asked the following questions.
- Q1. About vmc programming
- Q2. About production
- Q3. About manpower handling
- Q4. Overall effective efficiency
- Ans.
Effective efficiency combines productivity with resource optimization for better outcomes.
Streamlining processes: Implementing lean methodologies to reduce waste, e.g., using Kanban boards.
Setting clear goals: Establishing SMART objectives to enhance focus and accountability.
Utilizing technology: Adopting software tools for project management, like Trello or Asana, to improve collaboration.
Regular performance reviews: ...
Abhishek Sen
(2 Questions)
- Q1. Old experience with same product Industry
- Ans.
I have 5 years of experience in the same product industry, working on various projects and gaining expertise in the field.
Worked on product development and improvement projects
Collaborated with cross-functional teams to ensure product quality and efficiency
Implemented new technologies and processes to enhance product performance
Participated in product testing and validation processes
Provided technical support and train...
- Q2. Personal information
Deputy Manager Interview Questions & Answers
Mining Engineering Services
Anonymous
posted on 29 Apr 2025
Selected
I appeared for an interview in Mar 2025, where I was asked the following questions.
- Q1. Technical Experties
- Q2. Working Knowledge
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Mining Engineering Services
Anonymous
posted on 22 Mar 2024
Selected
I applied via Recruitment Consulltant and was interviewed before Mar 2023. There were 2 interview rounds.
(1 Question)
- Q1. Sub station Earthing,Earth mat details
(1 Question)
- Q1. Salary breakup explained and final negotiaition
Interview Preparation Tips
Western India Forgings Interview FAQs
Tell us how to improve this page.
Overall Interview Experience Rating
based on 5 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Western India Forgings Reviews and Ratings
based on 61 reviews
Rating in categories
|
Assistant Manager
17
salaries
|  ₹4.2 L/yr - ₹9 L/yr |
|
Quality Engineer
12
salaries
| ₹2.8 L/yr - ₹4.4 L/yr |
|
Design Engineer
7
salaries
| ₹2.6 L/yr - ₹4.8 L/yr |
|
Senior Engineer
7
salaries
| ₹3.7 L/yr - ₹6.2 L/yr |
|
Senior Production Engineer
6
salaries
| ₹4 L/yr - ₹5.2 L/yr |
African Industries
Nava Limited
Nagata India
Knest Manufacturers
- Home >
- Interviews >
- Western India Forgings Interview Questions
