i
Ultra Corpotech
Filter interviews by
I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.
Weight can be calculated by multiplying the mass of an object by the acceleration due to gravity.
Weight = mass x acceleration due to gravity
The standard acceleration due to gravity on Earth is 9.81 m/s^2
For example, the weight of a 10 kg object on Earth would be 10 kg x 9.81 m/s^2 = 98.1 N
PPM (Parts Per Million) is calculated by dividing the number of defective units by the total number of units produced, then multiplying by one million.
Calculate the number of defective units.
Calculate the total number of units produced.
Divide the number of defective units by the total number of units produced.
Multiply the result by one million to get the PPM value.
posted on 9 Sep 2021
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
The assembly line sequence involves a step-by-step process of assembling parts to create a final product.
The process starts with the arrival of raw materials
Parts are then assembled in a specific order
Quality checks are performed at various stages
The final product is packaged and shipped
Efficiency and safety are key considerations throughout the process
posted on 23 Jun 2022
I applied via Recruitment Consulltant and was interviewed in Dec 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Apr 2021. There were 2 interview rounds.
I am a Service Engineer with expertise in troubleshooting and repairing complex machinery.
Experienced in diagnosing and resolving technical issues in industrial equipment
Proficient in using diagnostic tools and software to identify problems
Skilled in performing maintenance and repairs on various types of machinery
Strong problem-solving and communication skills
Ability to work independently and under pressure
Example: Suc...
The speed difference in a hydraulic ram is due to the difference in effective areas on the head side and rod side.
The head side of the ram has a larger effective area, resulting in slower speed.
The rod side of the ram has a smaller effective area, resulting in faster speed.
This speed difference is a result of the hydraulic pressure acting on different areas.
The speed ratio between the head side and rod side can be calc...
A pressure relief valve is used to protect equipment and systems from excessive pressure by releasing the pressure when it exceeds a certain limit.
Prevents damage to equipment and systems
Ensures safety of personnel
Maintains system integrity
Prevents explosions or ruptures
Relieves excess pressure by opening and releasing fluid or gas
Commonly used in boilers, pressure vessels, pipelines, and hydraulic systems
An orifice is a small opening or hole through which fluid or gas can flow.
Orifices are commonly used in various industries, such as plumbing, engineering, and manufacturing.
They are often used to control the flow rate of fluids or gases.
Orifices can be found in devices like nozzles, valves, and flow meters.
The size of an orifice determines the flow rate and pressure drop across it.
Examples of orifices include the tiny ...
I am looking for a job change to explore new opportunities and challenges.
Seeking career growth and advancement
Wanting to work in a different industry or with different technologies
Desire for a better work-life balance
Relocation or proximity to family
Unsatisfactory current job situation
I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.
Open loop and closed loop are two modes of operation in hydraulic systems.
Open loop operation: The hydraulic system operates without feedback control. The output is not adjusted based on the system's performance.
Closed loop operation: The hydraulic system uses feedback control to adjust the output based on the system's performance.
Open loop systems are simpler and less expensive, but they lack precision and accuracy.
Cl...
The starting circuit is responsible for initiating the engine's operation.
The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.
When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.
The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion process.
Once...
I am a highly skilled and experienced service engineer with a proven track record of successfully troubleshooting and resolving complex technical issues.
I have a strong technical background and extensive experience in diagnosing and repairing equipment.
I am a quick learner and can adapt to new technologies and processes easily.
I have excellent communication skills and can effectively communicate with customers and team...
My core values include integrity, accountability, and continuous learning.
Integrity: I believe in always doing the right thing, even when no one is watching.
Accountability: I take ownership of my actions and responsibilities.
Continuous learning: I strive to constantly improve my skills and knowledge.
Example: I once discovered a mistake in a project I was working on, and instead of ignoring it, I took responsibility and...
posted on 6 Nov 2018
I applied via Naukri.com and was interviewed in Nov 2018. There were 9 interview rounds.
I applied via Naukri.com
I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.
A hydraulic circuit is a system that uses pressurized fluid to transmit power.
A hydraulic pump is used to create pressure in the fluid.
Valves control the flow of fluid through the circuit.
Actuators, such as cylinders or motors, convert the fluid pressure into mechanical force.
A reservoir stores the fluid and a filter removes contaminants.
Examples include excavators, cranes, and hydraulic presses.
Tappet setting is the process of adjusting the clearance between the tappet and the valve stem in an engine.
Tappet setting ensures proper valve timing and prevents engine damage.
It involves adjusting the clearance between the tappet and the valve stem using a feeler gauge.
The correct tappet setting varies depending on the engine model and manufacturer.
Incorrect tappet setting can cause engine noise, poor performance, a...
I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 7 reviews
Rating in categories
Quality Engineer
90
salaries
| ₹3 L/yr - ₹6.5 L/yr |
Junior Engineer
81
salaries
| ₹2.3 L/yr - ₹6 L/yr |
Engineer
64
salaries
| ₹3 L/yr - ₹8.6 L/yr |
Senior Engineer
54
salaries
| ₹3.7 L/yr - ₹8.4 L/yr |
Assistant Manager
49
salaries
| ₹5.8 L/yr - ₹14 L/yr |
Ge India Industrial
Gilbarco Veeder Root
Kirloskar Toyota Textile Machinery
Hyundai Construction Equipment