Transpek Industry Mechanical Maintenance Engineer Interview Questions and Answers

Q1. Last company you worked in?
Ans. 
I worked at XYZ Company, a manufacturing firm specializing in automotive components.
• Responsible for conducting preventive maintenance on production machinery

• Troubleshoot and repair mechanical issues on equipment

• Collaborated with production team to ensure minimal downtime

• Implemented new maintenance procedures to improve efficiency
Answered by AI
View 1 more answer
Q2. Why you left last job?
Ans. In recession period i lost my job. My company was facing financial crises from last 6 months and finally they given lay off to 41 emoloyees in single day.
Answered Anonymously
Add your answer
Q3. Are you ready to relocate or daily updown fir job?
Ans. 
Yes, I am willing to relocate or commute daily for the job.
• I am open to relocating for the right opportunity.

• I am willing to commute daily if necessary.

• I understand the importance of flexibility in the job market.
Answered by AI
View 1 more answer
Q4. What are your salary expectations?
Add your answer
Q5. As per company policy and my experience.
Add your answer
Q6. Where are you currently located?
Add your answer

Q1. Tell me about yourself.
Ans. I done it in marathi. Name, experience, education and currently going upskilling courses and my family background. (I think he was not ready to listen or take interview as he kept his camera off in googlelive interaction and asked me to make my camera on. )
Answered Anonymously
Add your answer
Q2. What equipments are you handled?
Ans. 
I have handled a wide range of equipment in my role as a Mechanical Maintenance Engineer.
• Pumps and compressors

• Conveyors and material handling equipment

• Boilers and heat exchangers

• HVAC systems

• Generators and power distribution systems

• Machine tools and production equipment

• Hydraulic and pneumatic systems

• Crane and lifting equipment

• Instrumentation and control systems
Answered by AI
View 1 more answer
Q3. Why did you leave your last company?
Ans. Company was going through financial crises and given 41 employees lay off at that time. (Please mention recession period instead of saying above. As he want to listen only & only corporate world technical words)
Answered Anonymously
Add your answer
Q4. Why your performance was not good?
Ans. I once again replied with same companies financial crises situation from last six months.
Answered Anonymously
Add your answer
Q5. How many employees from department got lay off?
Add your answer
Q6. I replied with 3 out of 6 including our manager.
Add your answer
Q7. What was product of your last company?
Ans. I replied with intermediate pharmaceutical , nucleoside, speciality chemical and petroleum products. (He manager was intersted in pharmaceutical exp only)
Answered Anonymously
Add your answer
Q8. If i opened centrifugal pump tell?
Ans. 
When opening a centrifugal pump, it is important to follow proper procedures to ensure safety and prevent damage.
• Before opening the pump, ensure that it is isolated from the power source and all pressure has been relieved.

• Inspect the pump for any signs of damage or wear, such as leaks, cracks, or excessive vibration.

• Check the pump's impeller and casing for any debris or blockages that may affect its performance.

• If nece...read more
Answered by AI
View 1 more answer
Q9. How the vacuum created in steam ejector?
Ans. 
Vacuum is created in a steam ejector through the principle of jet propulsion.
• Steam ejectors use high-pressure steam to create a low-pressure environment.

• The steam enters the nozzle of the ejector and expands, creating a high-velocity jet.

• This high-velocity jet entrains and compresses the surrounding gas or vapor, reducing its pressure.

• The entrained gas or vapor is then discharged through the diffuser, creating a vacuum...read more
Answered by AI
Add your answer
Q10. Due to high steam from ventury the cycloids is created in entering area in very quick time so creating vacuum. (Don't tell "keep it short and simple" Pattern. Tell in theory way in velocity and pressure ...read more
Add your answer
Q11. 1 torr=? Mmof hg
Ans. 
1 torr is equal to 0.03937 mm of Hg.
• 1 torr is a unit of pressure equal to 1/760th of standard atmospheric pressure.

• mm of Hg is a unit of pressure commonly used in vacuum systems.

• To convert torr to mm of Hg, multiply by 0.03937.

• Example: 1 torr = 1 * 0.03937 mm of Hg = 0.03937 mm of Hg.
Answered by AI
Add your answer
Q12. 759 mm of hg
Ans. 
759 mm of hg is a unit of pressure measurement.
• mm of hg is a common unit used to measure pressure.

• 759 mm of hg is equivalent to 1012.8 millibars or 14.1 pounds per square inch (psi).

• It is often used in meteorology to measure atmospheric pressure.

• In mechanical maintenance, it can be used to monitor pressure in systems or equipment.

• For example, if a pressure gauge reads 759 mm of hg, it indicates the pressure exerted by
Answered by AI
Add your answer

Q1. Tell me about parameters you observed in clean room area.
Ans. 
In a clean room area, parameters observed include air quality, temperature, humidity, particle count, and pressure differentials.
• Air quality is monitored to ensure low levels of contaminants.

• Temperature is controlled to maintain a stable environment for sensitive equipment.

• Humidity levels are regulated to prevent moisture-related issues.

• Particle count is measured to ensure cleanliness and prevent contamination.

• Pressure...read more
Answered by AI
View 1 more answer
Q2. TELL ME ABOUTE AHU
Ans. It is Air handling unit used for providing specific or required condition in clean room area for that filters of 10,5 & 0.5 micron installed. It is consisting of cooling and heating lined over which filtered air is allowed to pass through damper system.
Answered Anonymously
Add your answer
Q3. Tell me mechanical seal types.
Ans. 
Mechanical seal types include cartridge seals, component seals, and bellows seals.
• Cartridge seals are pre-assembled units that are easy to install and replace.

• Component seals are made up of separate rotating and stationary parts.

• Bellows seals use a flexible metal bellows to provide a dynamic seal.
Answered by AI
View 1 more answer

Q1. Turbine operation activities
Ans. 
Turbine operation activities involve monitoring and controlling the performance of turbines in power plants.
• Monitoring turbine speed, temperature, and pressure

• Adjusting turbine controls to maintain optimal performance

• Performing routine maintenance and inspections

• Troubleshooting and repairing turbine malfunctions

• Collaborating with other engineers and technicians to ensure safe and efficient operation
Answered by AI
Add your answer
Q2. Power Plant Description
Ans. 
A power plant is a facility that generates electricity by converting various forms of energy into electrical energy.
• Power plants can use various sources of energy such as coal, natural gas, nuclear, hydro, wind, and solar.

• The energy is converted into electrical energy through various processes such as combustion, steam turbines, and generators.

• Power plants are typically divided into two categories: base load plants and...read more
Answered by AI
Add your answer
Q3. Hrsg bolier & ges fule etc work
Add your answer
Q4. Cooling Tower etc work
Add your answer
Q5. Turbine fild work etc.
Add your answer

Introduction & Personal questions

Q1. Process regarding & cross question
Add your answer
Q2. HTO & MTO question
Add your answer

Q1. Package & work responsibility
Add your answer
Q2. Others
Add your answer

Q1. Clear about ur process what u had done in previously
Add your answer
Q2. About ur strength and weakness, what will gain company if u hired
Add your answer
Q3. About process safety and work safety
Add your answer

Q1. Why u r leaving current company,
Ans. 
Seeking new challenges and growth opportunities.
• Looking for a more challenging role

• Seeking career growth and advancement

• Want to broaden my skillset and learn new technologies

• Current company lacks opportunities for professional development

• Desire to work in a different industry or sector
Answered by AI
Add your answer
Q2. About material handling and material balance
Add your answer
Q3. Why u r switching pharma to chemical
Ans. 
I am switching from the pharmaceutical industry to the chemical industry to broaden my knowledge and skills in different sectors.
• To gain a broader understanding of different chemical processes and applications

• To explore new opportunities and challenges in the chemical industry

• To expand my skill set and learn new techniques in chemical engineering

• To contribute my pharmaceutical experience and knowledge to the chemical i...read more
Answered by AI
Add your answer

Q1. Why u r leaving nd abiut package discussions
Add your answer

Q1. Which pipe line used in Huzardous chemicals?
Ans. 
Stainless steel pipelines are commonly used for transporting hazardous chemicals due to their corrosion resistance and durability.
• Stainless steel pipelines are preferred for their resistance to corrosion from hazardous chemicals.

• PVC pipelines are not suitable for hazardous chemicals as they can degrade and leak.

• Carbon steel pipelines can be used for some hazardous chemicals, but may require additional coatings or linin...read more
Answered by AI
Add your answer
Q2. How to calculate the steam of boiler?
Ans. 
To calculate the steam of a boiler, you need to know the boiler's efficiency, steam flow rate, and specific enthalpy of steam.
• Calculate the energy input by multiplying the mass flow rate of steam by the specific enthalpy of steam.

• Determine the energy output by dividing the energy input by the boiler's efficiency.

• The steam flow rate can be measured using a flow meter, and the specific enthalpy of steam can be obtained f...read more
Answered by AI
Add your answer
Q3. Draw the module of coal fired hot air generator
Ans. 
The module of a coal fired hot air generator typically includes a combustion chamber, heat exchanger, fan, and exhaust system.
• Combustion chamber where coal is burned to produce heat

• Heat exchanger to transfer heat from combustion gases to the air

• Fan to circulate the heated air

• Exhaust system to remove combustion byproducts
Answered by AI
Add your answer

Q1. Why do you want to change the company?
Add your answer
Q2. Are you ready to relocate?
Add your answer