Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Sedemac Mechatronics Team. If you also belong to the team, you can get access from here

Sedemac Mechatronics Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Sedemac Mechatronics Manufacturing Engineer Interview Questions and Answers

Updated 9 Oct 2024

Sedemac Mechatronics Manufacturing Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Math and reasoning..

Round 2 - Technical 

(2 Questions)

  • Q1. Resistance unit
  • Q2. Describe the ohm law
  • Ans. 

    Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it, and inversely proportional to the resistance of the conductor.

    • Ohm's Law is represented by the formula I = V/R, where I is the current in amperes, V is the voltage in volts, and R is the resistance in ohms.

    • It helps in calculating the current, voltage, or resistance in a circuit when the other two valu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Preparation should be good..

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Basic javascript and angular
Round 2 - Technical 

(1 Question)

  • Q1. Js and angular questions
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was very basic .The questions were from Clocks,mixtures and allegations, ratios and proportions, profit and loss, Lot of quants about 60 questions in 60 minutes.

Round 2 - essay writing 

(2 Questions)

  • Q1. To sell a pen
  • Ans. 

    This pen is not just a writing tool, but a stylish accessory that will make you stand out.

    • Highlight the sleek design and quality craftsmanship of the pen

    • Emphasize the smooth writing experience it provides

    • Mention any special features like a comfortable grip or refillable ink

    • Give examples of situations where having a reliable pen is essential, such as signing important documents or taking notes in a meeting

  • Answered by AI
  • Q2. About social media

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in aptitude and prepare well
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Code + project + apti + java
  • Q2. Spring based questions
  • Q3. Aptitude based given 3 questions

Interview Preparation Tips

Interview preparation tips for other job seekers - know your project very well and aptitude is required
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. C programming, memory and pointer
  • Q2. Embedded systems basics
  • Q3. Basic networking concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - the main focus is on communication skills and its about personality
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

CS Code Subjects Mcq - OS, DBMS, DATA STRUCTURES, CN

I applied via Naukri.com and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. How will you sync your distributed systems
  • Ans. 

    I will use a combination of messaging systems, data replication, and versioning to ensure consistency and availability.

    • Use messaging systems like Kafka or RabbitMQ to ensure reliable communication between systems

    • Implement data replication to ensure that data is available on multiple nodes

    • Use versioning to ensure that all nodes are working with the same data

    • Implement conflict resolution strategies to handle conflicts th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - just be yourself, they will not ask you irrelevant questions, at least in my case.

I applied via Naukri.com and was interviewed in Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is difference between flip-flop and Latches?
  • Ans. 

    Flip-flops and latches are sequential logic circuits used to store and manipulate binary data.

    • Flip-flops are edge-triggered devices, while latches are level-sensitive devices.

    • Flip-flops have separate clock and data inputs, while latches have a single input for both clock and data.

    • Flip-flops are used in synchronous circuits, while latches are used in asynchronous circuits.

    • Flip-flops are more complex and require more cir...

  • Answered by AI
  • Q2. Where is the money needed to recruited you for embedur system?.The Hr will ask.

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not apply or just putting resume to this company.As the hr will make money with this job. They don't deseve Talented candidates.They want referrals and salary cuts for hr to hire you.Instead of hiring candidates for software position, They should hire best Hr first (definitely in chennai)
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
-

I appeared for an interview before Feb 2024.

Round 1 - One-on-one 

(1 Question)

  • Q1. Sales strategies
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

Deals with quantitative aps, networking, electrical core and c code snippets

Round 2 - Group Discussion 

Is basically a group technical interview. anyone who knows the answer can rise their hand, and the interviewer will prompt them to answer-online meet

Round 3 - Group Discussion 

This is similar to gd1.

Sedemac Mechatronics Interview FAQs

How many rounds are there in Sedemac Mechatronics Manufacturing Engineer interview?
Sedemac Mechatronics interview process usually has 2 rounds. The most common rounds in the Sedemac Mechatronics interview process are Aptitude Test and Technical.
How to prepare for Sedemac Mechatronics Manufacturing Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sedemac Mechatronics. The most common topics and skills that interviewers at Sedemac Mechatronics expect are Manufacturing Engineering.
What are the top questions asked in Sedemac Mechatronics Manufacturing Engineer interview?

Some of the top questions asked at the Sedemac Mechatronics Manufacturing Engineer interview -

  1. Describe the ohm ...read more
  2. Resistance u...read more

Tell us how to improve this page.

Sedemac Mechatronics Manufacturing Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Zeta Interview Questions
3.4
 • 71 Interviews
embedUR Systems Interview Questions
3.2
 • 48 Interviews
Mitsogo Inc Interview Questions
3.0
 • 38 Interviews
Seclore Interview Questions
4.1
 • 26 Interviews
BIZONGO Interview Questions
2.9
 • 18 Interviews
Exponentia.ai Interview Questions
4.2
 • 15 Interviews
Jio Haptik Interview Questions
3.4
 • 15 Interviews
View all
Sedemac Mechatronics Manufacturing Engineer Salary
based on 12 salaries
₹2.3 L/yr - ₹5.5 L/yr
30% less than the average Manufacturing Engineer Salary in India
View more details

Sedemac Mechatronics Manufacturing Engineer Reviews and Ratings

based on 3 reviews

3.6/5

Rating in categories

4.6

Skill development

3.1

Work-life balance

3.1

Salary

3.2

Job security

4.6

Company culture

2.5

Promotions

4.2

Work satisfaction

Explore 3 Reviews and Ratings
Test Engineer
67 salaries
unlock blur

₹1.8 L/yr - ₹4.5 L/yr

Production Engineer
47 salaries
unlock blur

₹1.2 L/yr - ₹4.6 L/yr

Quality Engineer
37 salaries
unlock blur

₹1.5 L/yr - ₹4 L/yr

Engineer
23 salaries
unlock blur

₹2.5 L/yr - ₹7.7 L/yr

Lead Engineer
20 salaries
unlock blur

₹12 L/yr - ₹22 L/yr

Explore more salaries
Compare Sedemac Mechatronics with

Innovatiview India Ltd

3.9
Compare

Watchyourhealth.com

4.7
Compare

Zeta

3.4
Compare

Shorthills AI

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview