Upload Button Icon Add office photos

RSB Transmissions

Compare button icon Compare button icon Compare

Filter interviews by

RSB Transmissions Quality Inspector Interview Questions and Answers

Updated 10 Jun 2022

RSB Transmissions Quality Inspector Interview Experiences

1 interview found

Round 1 - Technical 

(2 Questions)

  • Q1. Vernier caliper least count
  • Ans. 

    The least count of a Vernier caliper is the smallest measurement that can be read on the scale.

    • The least count is determined by the number of divisions on the main scale and the Vernier scale.

    • To calculate the least count, divide the smallest division on the main scale by the number of divisions on the Vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the Vernier scale has 10 divisions,

  • Answered by AI
  • Q2. Types of gauges , types of clearance , and basic metrology instruments least counts etc.
  • Ans. 

    Types of gauges, clearance and basic metrology instruments with least counts.

    • Types of gauges: plug, ring, snap, bore, thread, etc.

    • Types of clearance: running, sliding, interference, etc.

    • Basic metrology instruments: micrometer, vernier caliper, height gauge, etc.

    • Least counts: micrometer (0.01mm), vernier caliper (0.02mm), height gauge (0.02mm), etc.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read the basic Focus on Metrology and Quality Control Subject in Quality jobs
Thanks regards 🙏😘🙏

Interview questions from similar companies

I applied via Referral and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic knowledge of role based on experience level

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go in deep for technical knowledge for interview of any role in ABB India limited
Less knowledge will result in rejection

I applied via Naukri.com and was interviewed before Dec 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Diploma final year project ?
  • Q2. Favourite subject ?
  • Ans. 

    My favourite subject is Mathematics.

    • I enjoy solving complex problems and equations.

    • I find satisfaction in finding the correct solution.

    • Mathematics is a fundamental subject that is applicable in many fields such as engineering and finance.

  • Answered by AI
  • Q3. What is engine ?
  • Ans. 

    An engine is a machine that converts fuel into mechanical energy to power vehicles, machines, and equipment.

    • Engines come in different types such as gasoline, diesel, electric, and hybrid.

    • They work by burning fuel to create heat, which then creates pressure to move pistons and generate power.

    • Engines are used in cars, trucks, airplanes, boats, generators, and many other applications.

  • Answered by AI
  • Q4. Part of engine ?
  • Ans. 

    The engine is the part of a machine that converts fuel into motion.

    • The engine is responsible for generating power to move the machine.

    • It consists of various components such as cylinders, pistons, crankshaft, and camshaft.

    • The engine can be classified into different types such as diesel, gasoline, electric, etc.

    • The engine is the heart of a vehicle and requires regular maintenance to ensure optimal performance.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Any Questions quality related
e.g GD&T knowledge, 5s, 7 QC tool etc.

I applied via Approached by Company and was interviewed in Jan 2022. There were 2 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Salary discussion
  • Q2. Technical experience

Interview Questionnaire 

1 Question

  • Q1. 7QC tools, Drawing reading, material composition, basic NDT knowledge, ASTM,ASME knowledge, SPC,MSA, Vendor Audit and evaluation
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Referral and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Metallurgy of steel
  • Ans. 

    Metallurgy of steel involves understanding the properties and behavior of steel alloys.

    • Steel is primarily composed of iron and carbon, with other elements added to enhance specific properties.

    • The microstructure of steel, such as grain size and phase composition, greatly influences its mechanical properties.

    • Heat treatment processes like quenching and tempering can alter the hardness, strength, and toughness of steel.

    • Dif...

  • Answered by AI
  • Q2. Argon gas capacity
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Why do you join with us

I applied via Referral and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. There is no 2nd round

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge about the job and speaking capabilities
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic & technical details of vote field

Round 2 - Technical 

(2 Questions)

  • Q1. Indian standard codes, details, general work practice
  • Q2. Soil liquid & plastic limit criteria and compaction test requirement
  • Ans. 

    Soil liquid & plastic limit criteria and compaction test requirement

    • Soil liquid limit is the moisture content at which soil transitions from a plastic to a liquid state

    • Soil plastic limit is the moisture content at which soil can be rolled into a thread of a specific diameter without breaking

    • Compaction test is used to determine the optimal moisture content and maximum dry density of soil for construction

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Only salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Always prepared only for core subjective questions, other than you can pass the question. Also should update for current work practice at site.

Never try to guess a answer if you don't know, just say ''I don't know''
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself?
  • Q2. What is your previous experience ?
Round 3 - HR 

(2 Questions)

  • Q1. What are your strengths and weaknesses
  • Q2. Why are you interested this job

Interview Preparation Tips

Interview preparation tips for other job seekers - There is no advise for job seekers

RSB Transmissions Interview FAQs

How many rounds are there in RSB Transmissions Quality Inspector interview?
RSB Transmissions interview process usually has 1 rounds. The most common rounds in the RSB Transmissions interview process are Technical.
What are the top questions asked in RSB Transmissions Quality Inspector interview?

Some of the top questions asked at the RSB Transmissions Quality Inspector interview -

  1. Types of gauges , types of clearance , and basic metrology instruments least co...read more
  2. Vernier caliper least co...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 258 Interviews
ABB Interview Questions
4.1
 • 241 Interviews
Cummins Interview Questions
4.3
 • 233 Interviews
TechnipFMC Interview Questions
4.0
 • 72 Interviews
TÜV SÜD Interview Questions
3.9
 • 64 Interviews
Hilti Interview Questions
3.4
 • 61 Interviews
View all
RSB Transmissions Quality Inspector Salary
based on 44 salaries
₹1.5 L/yr - ₹3.4 L/yr
8% less than the average Quality Inspector Salary in India
View more details

RSB Transmissions Quality Inspector Reviews and Ratings

based on 5 reviews

3.5/5

Rating in categories

4.1

Skill development

4.7

Work-life balance

4.4

Salary

4.4

Job security

4.8

Company culture

4.0

Promotions

4.4

Work satisfaction

Explore 5 Reviews and Ratings
Quality Engineer
88 salaries
unlock blur

₹1.5 L/yr - ₹4.2 L/yr

Production Engineer
60 salaries
unlock blur

₹1.4 L/yr - ₹5.2 L/yr

Assistant Engineer
51 salaries
unlock blur

₹1.6 L/yr - ₹4 L/yr

Senior Engineer
48 salaries
unlock blur

₹3.5 L/yr - ₹8 L/yr

Assistant Manager
47 salaries
unlock blur

₹5.5 L/yr - ₹11 L/yr

Explore more salaries
Compare RSB Transmissions with

Thermax Limited

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

Isgec Heavy Engineering

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview