What is the curing formalities for our precast segment???

Question

Accepted Answer

Curing formalities for precast segments involve a specific process to ensure strength and durability.

Pre-wetting the segments before casting
Covering the segments with wet burlap or plastic sheets
Maintaining a moist environment for a specific duration
Using curing compounds or membranes to prevent moisture loss
Monitoring and controlling temperature and humidity during curing
Allowing sufficient curing time before handling or loading the segments

Accepted Answer

The surface need curing because it is lying dry for long. If we do not cure with water, it will swallow the water from wet concrete and leave the structural work dry like open teeth. the concrete mass shall scatter and cause failure to the construction work.

Accepted Answer

Curring provide to get higher strength to the concrete ,so that it can resist compressive forces

Accepted Answer

Minimum to maximum
7days to 28 days

Accepted Answer

The lap length of steel in the tension zone is typically longer than in the compression zone. This is because in the tension zone, the steel bars need to resist pulling forces, so they require more overlap to ensure proper transfer of forces between adjacent bars. In the compression zone, the steel bars are primarily subjected to compressive forces, so the lap length can be shorter. The specific lap lengths depend on factors such as the design specifications, the type of structure, and the materials being used.

Accepted Answer

The curing formalities for precast segment is curing good strength construction concrete

Accepted Answer

Curing formalities for precast segments involve a specific process to ensure strength and durability.

Accepted Answer

Curing formalities for precast segments involve a specific process to ensure strength and durability.

Pre-wetting the segments before casting

Covering the segments with wet burlap or plastic sheets

Maintaining a moist environment for a specific duration

Using curing compounds or membranes to prevent moisture loss

Monitoring and controlling temperature and humidity during curing

Allowing sufficient curing time before handling or loading the segments

Accepted Answer

Minimum 7day & maximum 28day

Accepted Answer

The curing is very important our precast but not formalities

Accepted Answer

Precast segment bridge

Accepted Answer

Curing formalities for precast segments involve a specific process to ensure strength and durability. Pre-wetting the segments before casting Covering the segments with wet burlap or plastic sheets Maintaining a moist environment for a specific duration Using curing compounds or membranes to prevent moisture loss Monitoring and controlling temperature and humidity during curing Allowing sufficient curing time before handling or loading the segments

Accepted Answer

Precast segment curing is cured for few days because the cement used is extra

Accepted Answer

Precast segment curing is cured for few days because the cement used is extra

Accepted Answer

Pond curing & wet surface curing use for precast

Accepted Answer

Precast segment curing is cured for few days because the cement used is extra hardening cement which gain the final strength in 3 day.

Accepted Answer

Precast segment curing is cured for few days because the cement used is extra hardening cement which gain the final strength in 3 day

Mainly its curing is in the water bath for example railway sleepers

Accepted Answer

Precast segment curing is cured for few days because the cement used is extra hardening cement which gain the final strength in 3 day

Mainly its curing is in the water bath for example railway sleepers

Accepted Answer

Spreading, wrolled thik cloth around side

What is the curing formalities for our precast segment???

Top Larsen & Toubro Limited Civil Engineer interview questions & answers

Popular interview questions of Civil Engineer

Top HR questions asked in Larsen & Toubro Limited Civil Engineer