Upload Button Icon Add office photos

IFB Agro Industries

Compare button icon Compare button icon Compare

Filter interviews by

IFB Agro Industries Electrical Technician Interview Questions, Process, and Tips

Updated 29 Dec 2023

IFB Agro Industries Electrical Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. What is DOL starter
  • Ans. 

    A DOL starter, or Direct-On-Line starter, is an electrical device used to start and stop motors by directly connecting them to the power supply.

    • DOL starters are commonly used in industrial applications.

    • They provide a simple and cost-effective method of motor starting.

    • The starter consists of a contactor, overload relay, and start/stop buttons.

    • When the start button is pressed, the contactor closes and connects the motor ...

  • Answered by AI
  • Q2. Can you make inter locking
  • Ans. 

    Yes, as an Electrical Technician, I can make interlocking systems to ensure safety and prevent accidents.

    • Interlocking systems are designed to prevent two or more electrical circuits from being active simultaneously.

    • They use mechanical or electrical mechanisms to ensure that certain conditions are met before allowing power to flow.

    • For example, in a motor control panel, interlocking can be used to prevent the motor from ...

  • Answered by AI
  • Q3. Can you make cable gland
  • Ans. 

    Yes, as an Electrical Technician, I am capable of making cable glands.

    • I have experience in selecting and installing cable glands for various electrical systems.

    • I am familiar with different types of cable glands such as armored, non-armored, and explosion-proof.

    • I can ensure proper sealing and strain relief for cables using appropriate cable glands.

    • I am skilled in following industry standards and regulations while making...

  • Answered by AI
  • Q4. If a motor does not works ,what you do?
  • Ans. 

    If a motor does not work, I would follow a troubleshooting process to identify and fix the issue.

    • Check if the motor is receiving power

    • Inspect the motor for any visible damage or loose connections

    • Test the motor's components, such as the capacitor or brushes

    • Use a multimeter to check for continuity or resistance

    • Verify if the motor's control circuitry is functioning properly

    • If necessary, replace faulty components or seek p

  • Answered by AI
  • Q5. No more questions
  • Q6. Can you sift deuti
  • Ans. 

    No

    • The question is not related to the electrical technician field.

    • There is no such term as 'deuti' in the electrical technician domain.

    • The answer is NO.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical maintenance and DOL/STAR DELTA STATER AND INTERLOCKING PANEL MAKING.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Electrical knowledge

Round 3 - Technical 

(5 Questions)

  • Q1. Drawing of Star delta starter
  • Ans. 

    A star delta starter is a type of reduced voltage starter used for starting three-phase induction motors.

    • Consists of a star contactor and a delta contactor

    • Initially motor is started in star configuration to reduce starting current

    • After a set time, switches to delta configuration for full speed operation

  • Answered by AI
  • Q2. Contactor interlocking with motors
  • Ans. 

    Contactor interlocking is a safety feature to prevent simultaneous operation of multiple motors.

    • Contactor interlocking ensures only one motor can run at a time to prevent overload.

    • It is achieved by using electrical interlocks between contactors of different motors.

    • For example, if Motor A is running, the contactor for Motor B will be prevented from closing.

    • This prevents both motors from running simultaneously and causin

  • Answered by AI
  • Q3. Technical skills
  • Q4. Behavior and punchuality
  • Q5. Wiring in panels
  • Ans. 

    Wiring in panels involves connecting electrical components using proper techniques and materials.

    • Ensure proper wire sizing and insulation for the current being carried

    • Follow wiring diagrams and manufacturer instructions for correct connections

    • Use wire labels and organize cables neatly for easy troubleshooting

    • Check for loose connections and secure all wires properly

    • Test the panel for functionality and safety before clos

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Varun Beverages Electrical Technician interview:
  • Starters
  • VFD Drives
Interview preparation tips for other job seekers - U have to good electrical knowledge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jan 2024.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about your self
  • Ans. 

    I am a dedicated Electrical Engineer with a passion for designing innovative solutions and improving efficiency.

    • Graduated with a degree in Electrical Engineering from XYZ University

    • Experienced in designing and implementing electrical systems for commercial buildings

    • Proficient in CAD software for creating schematics and layouts

    • Strong problem-solving skills and attention to detail

    • Completed internships at ABC Company and

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. All types of technical questions related to electrical
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. How to work compressor
  • Ans. 

    A compressor works by compressing air or gas to increase its pressure and decrease its volume.

    • The compressor takes in air or gas and compresses it using a piston or rotating impeller.

    • The compressed air or gas is then stored in a tank or released through a nozzle.

    • Compressors are used in various applications such as air conditioning, refrigeration, and pneumatic tools.

    • Regular maintenance is required to ensure proper func

  • Answered by AI
  • Q2. Explain the complete operation of the system
  • Ans. 

    The system operates by performing a series of tasks to achieve a specific goal.

    • The system receives input from the user or external sources.

    • It processes the input using algorithms and logic.

    • The processed data is then stored or displayed as output.

    • The system may also have feedback mechanisms to improve performance.

    • Examples include a computer system, a manufacturing assembly line, or a traffic control system.

  • Answered by AI
  • Q3. How to fix machinery, fault
  • Ans. 

    To fix machinery faults, identify the problem, troubleshoot, repair or replace faulty parts, and test the machinery.

    • Identify the problem by observing and testing the machinery

    • Troubleshoot by checking the manual or consulting with colleagues

    • Repair or replace faulty parts using appropriate tools and techniques

    • Test the machinery to ensure it is functioning properly

    • Document the repair process for future reference

  • Answered by AI
  • Q4. How to fix working time problem
  • Ans. 

    To fix working time problem, identify the root cause and implement appropriate solutions.

    • Identify the cause of the problem, such as inefficient scheduling or lack of resources

    • Implement appropriate solutions, such as adjusting schedules or hiring additional staff

    • Monitor the effectiveness of the solutions and make adjustments as necessary

  • Answered by AI
  • Q5. How to handle peak production time
  • Ans. 

    Peak production time can be handled by proper planning and organization.

    • Create a production schedule to ensure all tasks are completed on time

    • Prioritize tasks based on their importance and urgency

    • Ensure all equipment and machinery are in good working condition

    • Train and cross-train employees to handle multiple tasks

    • Consider hiring temporary staff to handle the increased workload

    • Monitor progress regularly and make adjust

  • Answered by AI
  • Q6. What is the reason of machinery, fault?
  • Ans. 

    Machinery faults can be caused by various factors such as wear and tear, improper maintenance, human error, and environmental factors.

    • Wear and tear of components can lead to machinery faults

    • Improper maintenance can cause machinery to malfunction

    • Human error such as incorrect operation or installation can lead to machinery faults

    • Environmental factors such as temperature, humidity, and dust can affect machinery performanc...

  • Answered by AI
  • Q7. What is the reason of working system fault
  • Ans. 

    Working system faults can be caused by various factors such as hardware failure, software bugs, power outages, and human error.

    • Hardware failure: malfunctioning components, overheating, or physical damage

    • Software bugs: coding errors, compatibility issues, or outdated software

    • Power outages: sudden loss of power or voltage fluctuations

    • Human error: incorrect configuration, mishandling of equipment, or lack of training

    • Examp...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Experience Holder please proper learning for your profession and deep point of your working system

Skills evaluated in this interview

Interview Questionnaire 

2 Questions

  • Q1. Panel contactor relay timer acb vcb motor startor
  • Q2. Pump house cooling tower Lt room panel

Interview Preparation Tips

Interview preparation tips for other job seekers - Good characters
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jul 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. How many years experience
  • Q2. What are there you are operating
Round 3 - Technical 

(2 Questions)

  • Q1. Cooling tower parameters
  • Ans. 

    Cooling tower parameters include water flow rate, temperature, pressure, and chemical levels.

    • Water flow rate must be monitored to ensure proper cooling efficiency

    • Temperature of the water entering and exiting the tower should be measured

    • Pressure levels need to be maintained within specified ranges

    • Chemical levels such as biocides and corrosion inhibitors should be regularly checked

  • Answered by AI
  • Q2. Draw the HVAC process diagram
  • Ans. 

    The HVAC process diagram illustrates the flow of air through a heating, ventilation, and air conditioning system.

    • Start with the intake of outside air through vents or ducts

    • Air passes through filters to remove dust and particles

    • Air is then heated or cooled by the HVAC unit

    • The conditioned air is distributed through ductwork to different rooms

    • Return air is collected and recirculated through the system

  • Answered by AI
Round 4 - Technical 

(2 Questions)

  • Q1. Tell me about in company safety
  • Q2. What is the PPE full form
  • Ans. 

    PPE stands for Personal Protective Equipment.

    • PPE is equipment worn to minimize exposure to hazards that can cause injuries or illnesses.

    • Examples of PPE include gloves, goggles, helmets, and respirators.

    • PPE is essential in maintaining safety in various industries such as construction, healthcare, and manufacturing.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Your knowledge is more important to technical side in maintenance

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - To sell more of your products, you should do more display end and outlet visits.

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(4 Questions)

  • Q1. Tell me about yourself.
  • Q2. What has worked so far and how
  • Ans. 

    Building strong relationships with clients and providing exceptional customer service.

    • Developing a personalized approach to sales based on understanding the needs and preferences of each client.

    • Regularly following up with clients to ensure their satisfaction and address any concerns.

    • Offering customized solutions and demonstrating the value of products or services.

    • Building a network of referrals through positive word-of...

  • Answered by AI
  • Q3. What do you do to grow
  • Ans. 

    To grow as a Sales Executive, I focus on continuous learning, building strong relationships, and adapting to market trends.

    • Continuously educate myself on industry trends, new products, and sales techniques

    • Build and maintain strong relationships with clients, colleagues, and industry professionals

    • Adapt my sales strategies to align with changing market trends and customer needs

    • Regularly analyze sales data and performance...

  • Answered by AI
  • Q4. Display first, extra really, good relation is very important to grow

Interview Preparation Tips

Interview preparation tips for other job seekers - To grow, it is very important to have a good relationship first, on the basis of which you can sell any items now.

I applied via Company Website and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Tell me sumthing about your self
  • Q2. Tell me your working style
  • Q3. Tell me your leave organization
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pre define questions and some questions based on interview communication.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. You have knowledge about liquor industry?
  • Ans. 

    Yes, I have knowledge about the liquor industry.

    • I have worked in the liquor industry for 5 years.

    • I am familiar with different types of liquor and their production processes.

    • I have experience in sales and marketing of liquor products.

    • I keep myself updated with the latest trends and regulations in the industry.

    • For example, I have knowledge about the recent increase in demand for craft beer and the impact of COVID-19 on l

  • Answered by AI
  • Q2. What is market share
  • Ans. 

    Market share refers to the percentage of total sales in a particular market that is held by a company or product.

    • Market share is a measure of a company's competitiveness in a particular market.

    • It is calculated by dividing a company's sales by the total sales in the market and multiplying by 100.

    • For example, if a company has sales of $10 million in a market with total sales of $100 million, its market share would be 10%...

  • Answered by AI
  • Q3. What to do for new product lunching
  • Ans. 

    For a successful new product launch, it's important to plan and execute a comprehensive marketing strategy.

    • Conduct market research to identify target audience and their needs

    • Develop a unique value proposition and messaging that resonates with the target audience

    • Create a multi-channel marketing plan that includes social media, email marketing, advertising, and PR

    • Offer promotions or incentives to encourage early adoption...

  • Answered by AI
  • Q4. Tell about your self
  • Ans. 

    Experienced Sales Executive with a proven track record in exceeding sales targets and building strong client relationships.

    • 10+ years of experience in sales, with a focus on B2B sales

    • Consistently achieved or exceeded sales targets by 20% or more

    • Developed and maintained strong relationships with key clients, resulting in repeat business and referrals

    • Implemented effective sales strategies and tactics to penetrate new mark...

  • Answered by AI
  • Q5. How to calculate industry
  • Ans. 

    Industry calculation involves analyzing market trends, competition, and consumer behavior to determine potential sales and revenue.

    • Research market trends and analyze competition

    • Identify target audience and their behavior

    • Estimate potential sales and revenue based on gathered data

    • Consider external factors such as economic conditions and government regulations

    • Use tools such as SWOT analysis and market research surveys

    • Exam...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about market share and industry

IFB Agro Industries Interview FAQs

How many rounds are there in IFB Agro Industries Electrical Technician interview?
IFB Agro Industries interview process usually has 2 rounds. The most common rounds in the IFB Agro Industries interview process are Resume Shortlist and Technical.
What are the top questions asked in IFB Agro Industries Electrical Technician interview?

Some of the top questions asked at the IFB Agro Industries Electrical Technician interview -

  1. If a motor does not works ,what you ...read more
  2. Can you make inter lock...read more
  3. Can you make cable gl...read more

Tell us how to improve this page.

IFB Agro Industries Electrical Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Varun Beverages Interview Questions
4.0
 • 237 Interviews
AB InBev India Interview Questions
3.4
 • 104 Interviews
Bisleri Interview Questions
4.2
 • 88 Interviews
Diageo Interview Questions
4.0
 • 68 Interviews
Pernod Ricard Interview Questions
3.7
 • 43 Interviews
Carlsberg Interview Questions
4.2
 • 25 Interviews
Radico Khaitan Interview Questions
3.8
 • 25 Interviews
View all
Sales Executive
40 salaries
unlock blur

₹2.2 L/yr - ₹6 L/yr

Assistant Manager
19 salaries
unlock blur

₹6.1 L/yr - ₹12 L/yr

Executive Accountant
14 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Senior Sales Executive
13 salaries
unlock blur

₹5.5 L/yr - ₹9 L/yr

Executive Production
12 salaries
unlock blur

₹2.9 L/yr - ₹4.9 L/yr

Explore more salaries
Compare IFB Agro Industries with

Varun Beverages

4.0
Compare

AB InBev India

3.4
Compare

Bisleri

4.2
Compare

Coca-Cola Company

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview