Elins Switchboards Maintenance Manager Interview Questions and Answers

A cooling tower is a device used to remove heat from a building or industrial process.

• The function of a cooling tower is to cool down water or other fluids by extracting heat from them.

• Cooling towers are commonly used in HVAC systems, power plants, and industrial processes.

• They work by evaporating a small portion of the water, which removes heat and cools down the remaining water.

• The cooled water is then circulated bac...read more

To dismantle a boiler feed pump, follow these steps

• Isolate the pump from the power source and drain the water from the system

• Remove the coupling and motor from the pump

• Disconnect the suction and discharge piping from the pump

• Remove the bolts and nuts that hold the pump casing together

• Lift the casing off the pump and remove the impeller and shaft

• Inspect and clean all parts before reassembling or replacing

Questions related to maintenance engineering including eddy current, 5S TPM, electromagnetic induction, RPM measurement, DC motor, shift handover, major breakdown, and star delta starter.

• Eddy current is a current induced in a conductor due to a changing magnetic field

• 5S TPM is a methodology for workplace organization and standardization

• Electromagnetic induction is the production of an electromotive force across a condu...read more

Star delta starter is a type of reduced voltage starter used in induction motors to reduce starting current.

• Consists of two contactors - one for star connection and one for delta connection

• Initially motor is started in star connection to reduce starting current

• After a set time, motor is switched to delta connection for full speed operation

• Used in applications where high starting current can damage equipment

To use a third party device in a PLC, you need to establish communication protocols and configure the PLC to send and receive data from the device.

• Identify the communication protocol supported by the third party device (e.g. Modbus, Profibus)

• Configure the PLC to communicate with the third party device using the identified protocol

• Map the data points between the PLC and the third party device to ensure seamless data exc...read more

The eddy current formula calculates the magnitude of induced currents in a conductor due to a changing magnetic field.

• The formula is given by: I = π * D * f * B * σ

• Where I is the eddy current (A)

• D is the diameter of the coil (m)

• f is the frequency of the magnetic field (Hz)

• B is the magnetic field strength (T)

• σ is the conductivity of the material (S/m)

To improve the power factor of a 130 kW load with a power factor of 0.7, capacitors can be used. The required rating of the capacitor depends on the desired power factor improvement.

• Install capacitors in parallel with the load to improve power factor

• Calculate the required capacitance using the formula: C = (P * tan(acos(pf))) / (V^2)

• Choose capacitors with the appropriate voltage and capacitance rating for the load

• Ensur...read more

I have a strong background in maintenance engineering and a proven track record of improving efficiency and reducing downtime.

• Extensive experience in troubleshooting and repairing mechanical and electrical systems

• Proven ability to implement preventive maintenance programs to increase equipment reliability

• Strong communication skills to work effectively with cross-functional teams

• Certified in relevant maintenance enginee