Filter interviews by
I applied via Referral and was interviewed in Nov 2020. There were 3 interview rounds.
The least count of Vernier caliper is the smallest measurement that can be read on the scale.
The least count of Vernier caliper is usually 0.02 mm or 0.001 inches.
It is determined by the number of divisions on the Vernier scale and the main scale.
For example, if the Vernier scale has 10 divisions and the main scale has 20 divisions, the least count would be 0.1 mm divided by 200, which is 0.0005 mm.
The least count is i...
10mm is equal to 10,000 microns. Other conversions include inches, centimeters, and meters.
1 inch = 25.4 mm
1 cm = 10 mm
1 m = 1000 mm
1 mm = 1000 microns
GTTC stands for Geometric Tolerance and Tolerance Calculation.
GTTC is a system used to specify and control the allowable variation in a part's geometry and dimensions.
It includes symbols and terms used to communicate the desired tolerances to manufacturers and inspectors.
Examples of GTTC symbols include concentricity, perpendicularity, and position.
GTTC calculations involve determining the maximum allowable deviation f...
A micrometer is a precision measuring instrument that measures the thickness or diameter of objects with high accuracy.
Micrometers work on the principle of screw gauge.
The spindle moves along the screw when rotated, and the thimble measures the distance traveled.
The accuracy of a micrometer is typically within 0.001 mm.
Micrometers are commonly used in manufacturing and engineering for quality control purposes.
There are...
I applied via Referral and was interviewed before Aug 2022. There were 4 interview rounds.
General & company history related
I applied via Campus Placement and was interviewed before Jul 2020. There were 4 interview rounds.
Valves are devices used to control the flow of fluids or gases. There are several types of valves used in various industries.
Gate valve
Ball valve
Butterfly valve
Check valve
Globe valve
Needle valve
Diaphragm valve
Pressure relief valve
I applied via Naukri.com and was interviewed in Oct 2020. There were 5 interview rounds.
I applied via Company Website and was interviewed in Feb 2021. There were 4 interview rounds.
5S is a workplace organization method that aims to improve efficiency and productivity by eliminating waste and optimizing workflow.
Sort - separate necessary items from unnecessary ones
Set in order - arrange necessary items in a logical and efficient manner
Shine - clean and maintain the workplace
Standardize - establish procedures and guidelines for maintaining the 5S system
Sustain - continuously improve and maintain th...
7QC Tool is a set of 7 quality control tools used for process improvement and problem-solving.
The tools are: Pareto Chart, Cause-and-Effect Diagram, Check Sheet, Control Chart, Histogram, Scatter Diagram, and Flow Chart.
They help in identifying and analyzing problems, and finding solutions.
For example, a Pareto Chart can be used to identify the most frequent problems in a process, while a Cause-and-Effect Diagram can h...
Kaizen is a Japanese term for continuous improvement.
Kaizen involves making small, incremental changes to improve processes and systems.
It is a key principle of Lean manufacturing and Six Sigma methodologies.
Kaizen encourages employee involvement and empowerment in the improvement process.
Examples of Kaizen include reducing waste, improving efficiency, and enhancing quality.
Kaizen is a long-term approach to improvement
posted on 30 Aug 2023
I applied via Approached by Company and was interviewed before Aug 2022. There were 2 interview rounds.
APQP (Advanced Product Quality Planning) is a structured method for defining and establishing the steps necessary to ensure that a product satisfies customer requirements.
APQP is a quality framework used in the automotive industry to ensure product quality and customer satisfaction.
It involves defining and documenting the product and process design and development activities.
APQP includes tasks such as identifying pote...
7QC tools are a set of quality control tools used for process improvement. Tribe4 tools are a specific set of tools used in Lean Six Sigma methodology.
7QC tools include Pareto chart, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart.
Tribe4 tools are specific to Lean Six Sigma and include value stream mapping, 5S, standard work, and visual management.
These tools help in iden...
PAS stands for Process Analysis Study and MSA stands for Measurement System Analysis.
PAS is used to analyze and improve processes within an organization.
MSA is used to assess the measurement system's capability and reliability.
PAS involves identifying process inputs, outputs, and key performance indicators.
MSA includes studies like Gage R&R to evaluate measurement system variation.
Both PAS and MSA are essential tools f...
based on 3 reviews
Rating in categories
Quality Engineer
46
salaries
| ₹1.4 L/yr - ₹3.6 L/yr |
Manufacturing Engineer
31
salaries
| ₹2.3 L/yr - ₹4.6 L/yr |
Production Engineer
29
salaries
| ₹1.8 L/yr - ₹3.6 L/yr |
Graduate Engineer Trainee (Get)
22
salaries
| ₹1.8 L/yr - ₹2.5 L/yr |
Senior Engineer
17
salaries
| ₹4.2 L/yr - ₹9.5 L/yr |
Marelli
Maxxis Rubber
Interface Microsystems
Seoyon E-hwa Automotive