Accentuate IT Solutions L2 Network Engineer Interview Questions and Answers

Q1. Where do you see yourself in 5 years?
Add your answer

Q1. Technical Tricky questions
Add your answer
Q2. Whay BGP is important in respect of OSPF
Ans. 
BGP and OSPF are both routing protocols, but BGP is used for inter-domain routing while OSPF is used for intra-domain routing.
• BGP is important in respect of OSPF because it allows for communication between different autonomous systems (AS)

• BGP is used to exchange routing information between different AS, while OSPF is used within a single AS

• BGP is used to determine the best path for traffic to take between different AS,...read more
Answered by AI
View 2 more answers
Q3. What are differences betweeen BGP and IBGP
Ans. 
BGP is used for routing between different autonomous systems, while IBGP is used for routing within the same autonomous system.
• BGP (Border Gateway Protocol) is an exterior gateway protocol used for routing between different autonomous systems.

• IBGP (Internal Border Gateway Protocol) is used for routing within the same autonomous system.

• BGP is used to exchange routing information between different autonomous systems (ASe...read more
Answered by AI
View 1 more answer
Q4. Can we create SVI in L2 switch? IF not why
Ans. 
No, SVIs cannot be created in L2 switches.
• SVI stands for Switched Virtual Interface.

• It is a virtual interface that represents a VLAN on a Layer 3 switch.

• L2 switches operate at Layer 2 of the OSI model and do not support routing or Layer 3 functionality.

• SVIs are used for routing between VLANs, which is a Layer 3 function.

• L2 switches can only create VLANs and assign ports to them for Layer 2 switching.

• To enable Layer 3 f...read more
Answered by AI
View 1 more answer
Q5. What is best link of OMP route Internet or MPLS?
Ans. 
The best link of OMP route depends on the specific needs and requirements of the network.
• Internet may be a better option for cost-effectiveness and flexibility, but MPLS may offer better reliability and security.

• Consider factors such as bandwidth, latency, traffic volume, and application requirements.

• Evaluate the pros and cons of each option before making a decision.

• For example, if the network requires low latency and ...read more
Answered by AI
View 1 more answer
Q6. What is TLOC is Viptela SDWAN, why it is used
Ans. 
TLOC in Viptela SDWAN stands for Transport Locator and is used to identify the physical or virtual location of a device in the network.
• TLOC is a unique identifier assigned to each device in the SDWAN network.

• It helps in determining the optimal path for traffic routing.

• TLOCs can be based on various parameters such as interface, IP address, or VPN.

• They are used to define the connectivity between different sites in the ne...read more
Answered by AI
View 1 more answer

Q1. What is bgp and osfp
Ans. 
BGP (Border Gateway Protocol) and OSPF (Open Shortest Path First) are routing protocols used in computer networks.
• BGP is an exterior gateway protocol used to exchange routing information between different autonomous systems.

• OSPF is an interior gateway protocol used to determine the best path for data packets within an autonomous system.

• BGP operates at the network layer and is commonly used in large-scale networks, such...read more
Answered by AI
Add your answer
Q2. Vlan and vtp difference
Ans. 
VLAN and VTP are both networking concepts, but they serve different purposes.
• VLAN (Virtual Local Area Network) is used to logically divide a single physical network into multiple virtual networks.

• VTP (VLAN Trunking Protocol) is a Cisco proprietary protocol used to manage VLAN configurations across a network of switches.

• VLANs provide segmentation, security, and broadcast control, while VTP simplifies VLAN management by ...read more
Answered by AI
Add your answer
Q3. Day to day activities
Add your answer

Q1. How much salary expected and current salary
Add your answer
Q2. Why are change job
Add your answer
Q3. Location mumbai are you interested
Add your answer

Q1. What is EIGRP Authentication ?
Ans. 
EIGRP Authentication is a security feature that ensures only authorized routers can participate in EIGRP routing.
• EIGRP Authentication uses a shared secret key between routers to authenticate each other.

• It can be configured in two modes - MD5 authentication and SHA authentication.

• MD5 authentication is more commonly used and provides better security.

• SHA authentication is newer and provides stronger security.

• EIGRP Authent...read more
Answered by AI
Add your answer
Q2. What is OSPF DR and BDR ?
Ans. 
OSPF DR and BDR are routers elected to manage communication within a multi-access network.
• DR stands for Designated Router and BDR stands for Backup Designated Router.

• They are elected by OSPF routers on a multi-access network to manage communication.

• DR and BDR are responsible for maintaining the topology database and forwarding updates to other routers.

• They reduce the amount of OSPF traffic on the network by acting as a...read more
Answered by AI
Add your answer
Q3. What is VLAN ?
Ans. 
VLAN stands for Virtual Local Area Network. It is a logical grouping of devices on a network based on their function, project or application.
• VLANs allow network administrators to segment a network into smaller, more manageable groups.

• Devices in a VLAN can communicate with each other as if they were on the same physical network, even if they are physically located on different switches.

• VLANs can improve network security...read more
Answered by AI
Add your answer

Q1. What's the Switch? And which layer do work?
Ans. 
A switch is a networking device that operates at Layer 2 of the OSI model, handling data at the data link layer.
• Switches forward data based on MAC addresses

• Operate at Layer 2 of the OSI model

• Used to create LANs and connect devices within a network

• Helps reduce network congestion by only sending data to the intended recipient
Answered by AI
Add your answer
Q2. OSI layer what happens and what do you do
Ans. 
In the OSI model, each layer has specific functions and responsibilities in the communication process.
• The OSI model consists of 7 layers, each with its own specific functions and responsibilities.

• Each layer communicates with the adjacent layers to ensure data is properly transmitted.

• For example, in the OSI model, Layer 1 (Physical layer) deals with the physical connection between devices, while Layer 2 (Data Link layer
Answered by AI
Add your answer
Q3. What is the difference between a Router and a Switch
Ans. 
Routers operate at Layer 3 of the OSI model and make decisions based on IP addresses, while switches operate at Layer 2 and make decisions based on MAC addresses.
• Routers operate at Layer 3 of the OSI model, while switches operate at Layer 2.

• Routers make decisions based on IP addresses, while switches make decisions based on MAC addresses.

• Routers connect different networks together, while switches connect devices within...read more
Answered by AI
Add your answer
Q4. VLAN what is happening
Add your answer
Q5. What's the DNS ?
Ans. 
DNS stands for Domain Name System, which translates domain names to IP addresses.
• DNS is like a phone book for the internet, translating human-readable domain names (like google.com) into IP addresses (like 172.217.3.206).

• It helps users access websites by translating domain names into IP addresses that computers can understand.

• DNS also helps with email delivery by translating domain names into IP addresses for mail serv...read more
Answered by AI
Add your answer

Q1. What's is tha SDN.
Ans. 
SDN stands for Software-Defined Networking, a technology that allows network administrators to manage network services through abstraction of lower-level functionality.
• SDN separates the control plane from the data plane, allowing for centralized control of network traffic.

• It enables network programmability, automation, and flexibility.

• SDN can improve network performance, security, and scalability.

• Examples of SDN techno...read more
Answered by AI
Add your answer
Q2. What's the Switch
Ans. 
A switch is a networking device that connects devices within a local area network (LAN) and forwards data packets between them.
• Switch operates at Layer 2 of the OSI model

• It uses MAC addresses to forward data within the network

• Switches improve network performance by reducing collisions and segmenting traffic

• Examples of switches include Cisco Catalyst series, Juniper EX series, etc.
Answered by AI
Add your answer
Q3. On which layer does OSI work
Ans. 
OSI works on the network layer.
• OSI (Open Systems Interconnection) model works on the network layer, which is Layer 3.

• The network layer is responsible for routing packets from the source to the destination across multiple networks.

• Examples of network layer protocols include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).
Answered by AI
Add your answer

MCQ exam CCNA related questions