Upload Button Icon Add office photos

Jindal Stainless

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Jindal Stainless Environmental Health and Safety Executive Interview Questions and Answers

Updated 14 Feb 2025

Jindal Stainless Environmental Health and Safety Executive Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the environmental compliance requirements for the iron and steel industry?
  • Ans. 

    Environmental compliance requirements for the iron and steel industry involve air and water quality regulations, waste management, and pollution prevention measures.

    • Compliance with air quality regulations such as emissions limits for particulate matter, sulfur dioxide, and nitrogen oxides

    • Adherence to water quality standards for discharge of pollutants into water bodies

    • Implementation of waste management practices to pro...

  • Answered by AI
  • Q2. What are the standards for ambient air quality and emissions monitoring in the iron and steel industry?
  • Ans. 

    Ambient air quality and emissions monitoring standards in the iron and steel industry.

    • Ambient air quality standards are set by regulatory bodies to protect public health and the environment.

    • Emissions monitoring involves measuring pollutants released into the air from iron and steel production processes.

    • Common pollutants monitored in the iron and steel industry include particulate matter, sulfur dioxide, nitrogen oxides...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview went well, and everything is progressing positively.

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Iron-Carbon Phase diagram, CCT curves, Pearlite,lever rule

Interview Preparation Tips

Round: Test
Experience: It was online test and was aptitude section first. Questions were easy and later there were questions on English grammer and comprehension which would require 10th level knowledge. At last there will be 25 technical questions. Surprisingly, most of them were factual.
Tips: Pick up any aptitude book and practise it to improve your problem solving speed.
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical + HR Interview
Experience: I was asked to draw Iron Carbon phase diagram and CCT curves. I was also tested about lever rule and eutectoid composition.
Tips: Coursework would suffice

College Name: IIT Madras

Intern Interview Questions & Answers

Tata Steel user image kunal mamile

posted on 28 Aug 2017

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself. Questions regarding Iron-Carbon diagram and CCT curves

Interview Preparation Tips

Round: Test
Experience: Basically there were some aptitude questions which were easy and English grammer(10th level) was asked. About technical aspect, questions were mostly factual.
Tips: For technical, prepare specifically for factual questions from your coursework. For aptitude part, focus on speed of solving problems.
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical + HR Interview
Experience: I was asked about myself and extra-curricular activities first followed by some technical questions about iron-carbon phase diagram and lever rule.
Tips: Course work would suffice

College Name: IIT Madras

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Explain HAZOP, softwares used in safety
  • Ans. 

    HAZOP is a structured methodology used to identify and mitigate potential hazards in a process. Softwares used in safety include PHAWorks, BowTieXP, etc.

    • HAZOP stands for Hazard and Operability Study

    • It involves a team of experts analyzing a process to identify potential hazards and their consequences

    • The team uses a set of guide words to systematically evaluate each part of the process

    • Softwares like PHAWorks, BowTieXP, e...

  • Answered by AI
  • Q2. Differnece between hazard and risk
  • Ans. 

    Hazard is a potential source of harm while risk is the likelihood of harm occurring.

    • Hazard is the potential to cause harm, while risk is the likelihood of harm occurring.

    • Hazard is an inherent characteristic of an object or situation, while risk is the chance of harm occurring based on exposure to the hazard.

    • Examples of hazards include sharp objects, chemicals, and electricity, while examples of risks include the likeli...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confient, speak clearly

I was interviewed before Jan 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. What is your family background?
  • Q2. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Focous on goal always respect your duty and learning something new here

I applied via Recruitment Consultant and was interviewed before May 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What are the legal documents do you maintain in your present company
  • Q2. Basic height and hot work questions
  • Q3. Forms of factory act
  • Ans. 

    The Factory Act is a set of laws that regulate the working conditions in factories.

    • The Factory Act of 1833

    • The Factory Act of 1844

    • The Factory Act of 1850

    • The Factory Act of 1864

    • The Factory Act of 1878

    • The Factory Act of 1891

    • The Factory Act of 1901

    • The Factory Act of 1934

  • Answered by AI
  • Q4. Basics of PPE

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was good, easily cracked it

I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Only experience discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Good environment for job. Overall very good for freshers.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Asked to give self introduction
  • Q2. Asked to give information about the past company

Interview Preparation Tips

Interview preparation tips for other job seekers - It’s really nice
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before Nov 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Nothing much just about personal details & Professional details
Round 3 - HSE 

(7 Questions)

  • Q1. Different between JSA & HIRA
  • Ans. 

    JSA focuses on specific job tasks while HIRA assesses risks across the entire work area.

    • JSA (Job Safety Analysis) is a process of identifying potential hazards associated with specific job tasks.

    • HIRA (Hazard Identification and Risk Assessment) is a broader approach that assesses risks across the entire work area.

    • JSA is more task-oriented, while HIRA is more comprehensive and considers all potential hazards and risks.

    • JS...

  • Answered by AI
  • Q2. What is mock drill
  • Ans. 

    A mock drill is a simulated emergency exercise conducted to test the preparedness and response of individuals and organizations.

    • Mock drills are often conducted in workplaces, schools, hospitals, and public spaces to practice emergency procedures.

    • They can involve scenarios such as fire drills, earthquake drills, active shooter drills, etc.

    • Participants are expected to follow the established protocols and procedures as if...

  • Answered by AI
  • Q3. Tell me about yourself spacially what is your job responsibilities in current company
  • Ans. 

    I am currently working as a Safety Officer in my current company.

    • My job responsibilities include ensuring compliance with safety regulations and standards.

    • I conduct regular safety inspections and audits to identify potential hazards and risks.

    • I develop and implement safety policies and procedures to promote a safe working environment.

    • I provide safety training to employees and conduct drills to prepare for emergencies.

    • I...

  • Answered by AI
  • Q4. Some question regarding your current job in detail
  • Q5. Some height work related questions
  • Q6. Electrical safety related questions
  • Q7. MIS related questions
Round 4 - HR 

(1 Question)

  • Q1. Salary discussion if selected

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ensure proper hike if you going to join there is almost no increment
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(4 Questions)

  • Q1. Total experience
  • Ans. 

    Total 6.7 years 4 company

  • Answered by CHINMAY KUMAR JENA
  • Q2. Safety 7 year or other
  • Q3. Now current salary
  • Q4. Expected salary
  • Ans. 

    I would expect a salary that is competitive and reflective of my experience and qualifications.

    • Research the average salary range for Safety Officers in your area and industry.

    • Consider your level of experience, education, and certifications.

    • Highlight any additional skills or qualifications that may warrant a higher salary.

    • Be prepared to negotiate and discuss benefits and perks as part of the overall compensation package

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Send your last 3 month salary slip
Contribute & help others!
anonymous
You can choose to be anonymous

Jindal Stainless Interview FAQs

How many rounds are there in Jindal Stainless Environmental Health and Safety Executive interview?
Jindal Stainless interview process usually has 1 rounds. The most common rounds in the Jindal Stainless interview process are Technical.
What are the top questions asked in Jindal Stainless Environmental Health and Safety Executive interview?

Some of the top questions asked at the Jindal Stainless Environmental Health and Safety Executive interview -

  1. What are the standards for ambient air quality and emissions monitoring in the ...read more
  2. What are the environmental compliance requirements for the iron and steel indus...read more

Recently Viewed

INTERVIEWS

Blinkit

5.6k top interview questions

INTERVIEWS

Tiger Analytics

No Interviews

INTERVIEWS

Jindal Stainless

10 top interview questions

CAMPUS PLACEMENT

SRM university (SRMU)

CAMPUS PLACEMENT

BS College, Patna

JOBS

Fractal Analytics

No Jobs

INTERVIEWS

Jindal Stainless

No Interviews

INTERVIEWS

Jindal Stainless

No Interviews

INTERVIEWS

Fractal Analytics

10 top interview questions

JOBS

Capgemini

No Jobs

Tell us how to improve this page.

Jindal Stainless Environmental Health and Safety Executive Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 836 Interviews
JSW Steel Interview Questions
3.9
 • 582 Interviews
Adani Power Interview Questions
3.9
 • 217 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 98 Interviews
View all
Junior Engineer
1.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Manager
1.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive Engineer
691 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
646 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
411 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jindal Stainless with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview