50+ Gammon Engineers And Contractors Interview Questions & Answers | Complete Prep Guide 2025

Gammon Engineers And Contractors Interview Experiences

Popular Designations

21 interviews found

DGM Procurement Interview Questions & Answers

Anonymous

posted on 22 Nov 2023

Interview experience

Good

Difficulty level

Moderate

Process Duration

6-8 weeks

Result

Selected

I applied via Approached by Company and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - One-on-one

(1 Question)

Q1. Different type of question

Add your answer

Round 3 - One-on-one

(1 Question)

Q1. Taxation related

Add your answer

DGM Procurement Interview Questions asked at other Companies

Q1. How do you handle Monopoly of Vendors, Negotiations

View answer (1)

Supervisor Interview Questions & Answers

Anonymous

posted on 11 May 2022

I applied via Walk-in and was interviewed in Apr 2022. There was 1 interview round.

Round 1 - HR

(1 Question)

Q1. Tell me about your self

Ans. My name is aditya maurya . My father name is ranjeet maurya .

Answered Anonymously

View 1 more answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Hevkrsfh fsj. Sjbvsyjvvffihstb dfgkx bdb nz hx bdv

Supervisor Interview Questions asked at other Companies

Q1. Self introduction? & what is mean by eCommerce ? How it can do

View answer (10)

Gammon Engineers And Contractors Interview Questions and Answers for Freshers

Deputy General Manager Project Interview Questions & Answers

Anonymous

posted on 12 Aug 2023

Interview experience

Excellent

Difficulty level

Hard

Process Duration

2-4 weeks

Result

Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - HR

(4 Questions)

Q1. HR will discuss about our Qualification and Experience and family details.

Add your answer

Q2. HR department send the review details to Technical Head .They will ask about our Quality and ability .

Add your answer

Q3. Group discussion will happen.

Add your answer

Q4. Board of Director will discuss about family details. And past experience and confidence.

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't expect normal interview. They may be ask about any of the subject. Code and reinforcement lab length and based on your experience.

Deputy General Manager Project Interview Questions asked at other Companies

Q1. Consumption of bricks per cubic menter of masonry wall ?

View answer (3)

Interview Questions & Answers

posted on 25 Oct 2021

I applied via Naukri.com and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire

1 Question

Q1. All over store activities

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Store process system by first in first out

Planning Engineer Interview Questions & Answers

Anonymous

posted on 4 Jul 2021

Interview Questionnaire

2 Questions

Q1. Take me through your cv

Add your answer

Q2. What you have new learn in NICMAR

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and never try to tell lie in an interview. Be whatever you are

Planning Engineer Interview Questions asked at other Companies

Q1. Prepare a small given example site schedule with sequencing and duration determine project duration in MSP/on Paper What is critical path method? How will you identify while making on paper rather than MSP? How would you track schedule-Proc... read more

View answer (1)

Get interview-ready with Top Gammon Engineers And Contractors Interview Questions

Asst Store Interview Questions & Answers

Anonymous

posted on 11 Aug 2021

Interview Questionnaire

1 Question

Q1. How much weight full length of 12 mm tmt bar?

Ans.

The weight of a full length 12 mm TMT bar depends on its specific density and length.

The weight of a TMT bar can be calculated using its density and length.
The density of a 12 mm TMT bar is typically around 0.89 kg/m.
To calculate the weight, multiply the density by the length of the bar in meters.
For example, a 12 mm TMT bar with a length of 6 meters would weigh approximately 5.34 kg.

Answered by AI

View 2 more answers

Asst Store Interview Questions asked at other Companies

Q1. What is the process of issuing material in your company?

View answer (5)

Geologist Interview Questions & Answers

Anonymous

posted on 12 Mar 2021

Interview Questionnaire

3 Questions

Q1. How we calculate RMR value?

Ans.

RMR value is calculated by assigning scores to various parameters related to rock mass characteristics.

RMR stands for Rock Mass Rating.
It is calculated by assigning scores to six parameters: uniaxial compressive strength, rock quality designation, spacing of discontinuities, condition of discontinuities, groundwater conditions, and orientation of discontinuities.
The scores for each parameter are added up to get the RMR...

Answered by AI

Add your answer

Q2. Which instruments used in tunnel excavation?

Ans.

Various instruments are used in tunnel excavation, including drilling machines, blasting equipment, and tunnel boring machines.

Drilling machines are used to create holes in the rock or soil for explosives.
Blasting equipment is used to break up the rock or soil.
Tunnel boring machines are used to excavate tunnels without the need for explosives.
Surveying instruments are used to ensure the tunnel is being excavated in the...

Answered by AI

Add your answer

Q3. What is RQD?

Ans.

RQD stands for Rock Quality Designation, a measure of rock mass quality used in geology and engineering.

RQD is calculated by measuring the percentage of intact rock pieces longer than 10 cm in a drill core sample.
It is used to assess the strength and stability of rock masses for engineering projects such as tunnels, dams, and foundations.
Higher RQD values indicate better rock quality and greater potential for stability...

Answered by AI

Add your answer

Geologist Interview Questions asked at other Companies

Q1. How important is groundwater? Why do water levels in wells rise and fall? Your mom drinks "artesian well water". What is it? Ground water always clean? If yes conclude, How can water be flowing out of a hill? And basics of Ground water for ... read more

View answer (1)

Interview Questions & Answers

Anonymous

posted on 22 Feb 2021

Interview Questionnaire

1 Question

Q1. Technical question which related to site

Add your answer

Assistant Manager Environment Interview Questions & Answers

Anonymous

posted on 31 Mar 2021

I applied via Indeed and was interviewed in Oct 2020. There was 1 interview round.

Interview Questionnaire

1 Question

Q1. Regarding Environmental Monitoring & EIA.

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident & answer technically.

Assistant Manager Environment Interview Questions asked at other Companies

Q1. How do you start the implementation of EMP from scratch during execution?

View answer (1)

Assistant General Manager Interview Questions & Answers

Anonymous

posted on 6 Sep 2021

I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire

3 Questions

Q1. Reg NATM TUNNELING

Add your answer

Q2. M/C to be deployed in tunneling

Ans.

M/C stands for Machine Control and is used in tunneling for precision and accuracy in excavation.

M/C technology helps in reducing the risk of accidents and errors during excavation.
It allows for real-time monitoring and adjustment of the excavation process.
Examples of M/C used in tunneling include laser-guided systems and GPS-based systems.
M/C can also be used for tunnel boring machines to ensure accurate and efficient...

Answered by AI

Add your answer

Q3. Reg geology

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Always try to speak point wise and firmly

Assistant General Manager Interview Questions asked at other Companies

Q1. It is observed that most of our Indian Bank's NIM is declining over the years. what could be some alternate revenue model for banks for boosting overall income to compensate for the declining NIM?

View answer (2)

Top trending discussions

View All

Interview Tips & Stories

5d (edited)

timepasstiwari

A Digital Markter

Got Rejected In an Interview, Just Because I Didn’t Answer a Personal Question

So, I got invited for this interview, and they told me to be there at 9 AM. Of course, I get there early, like 8:30, because I don't want to be late. But then I end up waiting for 1.5 hours... read more

Got a question about Gammon Engineers And Contractors?

Ask anonymously on communities.

Gammon Engineers And Contractors Interview FAQs

How many rounds are there in Gammon Engineers And Contractors interview?

Gammon Engineers And Contractors interview process usually has 1-2 rounds. The most common rounds in the Gammon Engineers And Contractors interview process are Resume Shortlist, One-on-one Round and Technical.

How to prepare for Gammon Engineers And Contractors interview?

Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Gammon Engineers And Contractors. The most common topics and skills that interviewers at Gammon Engineers And Contractors expect are Contracts, Billing, Budgeting, Cash Flow Management and Contract Administration.

What are the top questions asked in Gammon Engineers And Contractors interview?

Some of the top questions asked at the Gammon Engineers And Contractors interview -

How much weight full length of 12 mm tmt b...read more
Which instruments used in tunnel excavati...read more
What is the diesel consumption for Dence Bituen materi...read more

Assistant Manager 89 salaries	₹0 L/yr - ₹0 L/yr
Civil Engineer 43 salaries	₹0 L/yr - ₹0 L/yr
Deputy Manager 40 salaries	₹0 L/yr - ₹0 L/yr
Civil Site Engineer 21 salaries	₹0 L/yr - ₹0 L/yr
Plant Engineer 18 salaries	₹0 L/yr - ₹0 L/yr

Gammon Engineers And Contractors Interview Questions, Process, and Tips

Top Gammon Engineers And Contractors Interview Questions and Answers

Gammon Engineers And Contractors Interview Experiences

21 interviews found

(1 Question)

(1 Question)

DGM Procurement Interview Questions asked at other Companies

(1 Question)

Interview Preparation Tips

Supervisor Interview Questions asked at other Companies

(4 Questions)

Interview Preparation Tips

Deputy General Manager Project Interview Questions asked at other Companies

Interview Questions & Answers

Interview Questionnaire

1 Question

Interview Preparation Tips

Interview Questionnaire

2 Questions

Interview Preparation Tips

Planning Engineer Interview Questions asked at other Companies

Interview Questionnaire

1 Question

Asst Store Interview Questions asked at other Companies

Interview Questionnaire

3 Questions

Geologist Interview Questions asked at other Companies

Interview Questions & Answers

Interview Questionnaire

1 Question

Interview Questionnaire

1 Question

Interview Preparation Tips

Assistant Manager Environment Interview Questions asked at other Companies

Interview Questionnaire

3 Questions

Interview Preparation Tips

Assistant General Manager Interview Questions asked at other Companies

Gammon Engineers And Contractors Interview FAQs

Recently Viewed

S&P Global

Amara Raja Infra

S&P Global

S&P Global

Amara Raja Infra

Patel Infrastructure

Procter & Gamble

S&P Global

Blinkit

Tell us how to improve this page.

Gammon Engineers And Contractors Interviews By Designations

Interview Questions for Popular Designations

Gammon Engineers And Contractors Interview Process

Interview Questions from Similar Companies