TATA Steel

Page 2 of 2 for TATA Steel Interview Questions and Tips

Showing 11 - 19 of 19 interviews

11

TATA Steel Junior field engineer internship interview

9.5k views
Surya NischalFresherSelected
Application
I was interviewed on-campus at IIT Madras for Junior field engineer role at TATA Steel
Interview Process
Test Technical Interview
Round 1

Test

Duration
2.5 Minutes
No. of Questions
120 questions
Test Sections
  • Section 1: Logic, Verbal, Quant, and Mech
Interview Experience
The exam was good. U need to know the basics of Mech also.
Interview Tips
Revise all the previous courses well.
Round 2

Technical Interview

Interview Questions
  • Question 1: Interested subject? Strength of materials
  • Question 2: Interested subject? Strength of materials
  • Question 3: So all basic questions like draw the BM diagram for different loading cases he gives
  • Question 4: Draw the Fe-C diagram
Interview Experience
Tech and HR interview.
Interview Tips
It was peace. Revise basics
Funny Moments
Asked me to draw badminton court as I said I like playing badminton.
Read Full post...
12

TATA Steel Management trainee interview

6.4k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Management trainee role at TATA Steel
Interview Process
Test Other Interview
Round 1

Test

No. of Questions
120 questions
Test Sections
  • Section 1: 30 Apti questions
  • Section 2: 90 technical questions
Interview Experience
PPO- I was selected for intern after my third year. There was no cut- off for written test. So almost whole mechanical branch was present there. 120 questions were there; 30 apti and 90 tech. Apti were ok type, I rate the toughness level 7/10. But the technical part was pretty tough.
Round 2

Other Interview

Interview Experience
Out of around 110 students, 10 were shorlisted for the interview
Skills

Skills Tested

Skill Tips
Well, I was not at all prepared. Anyways, the technical part they asked, it wouldn't have helped much even if I studied.More weightage was from thermodynamics, MOM, SOM and metal cutting.
General Tips
Interview was purely technical, so I would suggest STUDY, nothing else will help. HR questions were pretty simple and I don't think they were serious about HR part. Well I was told that company has excellent policy of awarding PPOs, I was pretty happy with that.
Read Full post...
13

TATA Steel Management trainee interview

6.3k views
AnonymousFresherSelected
Application
I was interviewed on-campus for Management trainee role at TATA Steel
Interview Process
Test Group Discussion HR Interview
Round 1

Test

Interview Experience
aptitude + chemistry (12 std level)
Round 2

Group Discussion

Group Discussion Topic
Money is sweeter than honey
Round 3

HR Interview

Interview Experience
Main focus on project .Checked if you know the basic ideas on project topic.Was asked whats the difference between RnD in academics and Industry. Company wanted to know if he will stay with JSW for a longer period or go back to academics. This question was repeated in different ways.Questions about steel and its alloying elements were asked. Second round of interview with Higher authorities was mostly HR oriented.
Skills

Skills Tested

Skill Tips
CG matters
Resources

Preparation materials

Books
  • 64 HR questions,
Read Full post...
14

TATA Steel interview

6.2k views
AnonymousFresherSelected
Application
I was interviewed on-campus for TATA Steel
Interview Process
Group Discussion Interview
Round 1

Group Discussion

Interview Experience
Group was of 10 people
Interview Tips
Clear understanding of topic is essential. At first, each person was given 5 minutes time to think and given a chance to speak. Then there was debate for about 10 min. Basics of metallurgy, steel making, casting process etc. Basic HR questions such as strengths, weaknesses, BTech project, MTech project, term project if relevant. Clearly understand the topic and then make your argument. Carry a pen and paper. Don’t drop the pen/ paper/any other stationary on the floor in excitement while making your statements (one candidate did that). Be cool and raise strong arguments but speak politely.
Round 2

Interview

Interview Experience
.Mix of HR type and Technical questions.
Interview Tips
Try to find out the job profile before hand. Give your answers in such a way that you project yourself as a match for the job profile. Tell about relevant subjects/ projects/ internships etc. Make a separate CV for Tata Steel highlighting your relevant strong points. You may ask about your job location etc at the end of the interview.
Skills

Skills Tested

Skill Tips
Although not specified by the company, all shortlisted candidates had a decent CGPA of above 8.0 and were B.Tech. students of the Mechanical Engineering stream. Not specified but it depends on the job profile. Command over any software such as C or Matlab will be helpful. Project work related to automation, coding, robotics etc will help. Basic knowledge of steel, metallurgy, casting processes etc.
Resources

Preparation materials

Courses
  • MATLAB,
Read Full post...
15

TATA Steel interview

6.1k views
AnonymousFresherSelected
Application
I was interviewed on-campus for TATA Steel
Interview Process
Group Discussion Interview
Round 1

Group Discussion

Group Discussion Topic
Automation in process industry
Interview Experience
Group was of 10 people.
Interview Tips
Clear understanding of topic is essential. At first, each person was given 5 minutes time to think and given a chance to speak. Then there was debate for about 10 min. Basics of metallurgy, steel making, casting process etc. Basic HR questions such as strengths, weaknesses, BTech project, MTech project, term project if relevant. Clearly understand the topic and then make your argument. Carry a pen and paper. Don’t drop the pen/ paper/ any other stationary on the floor in excitement while making your statements (one candidate did that). Be cool and raise strong arguments but speak politely.
Round 2

Interview

Interview Experience
Mix of HR type and Technical questions.
Interview Tips
Try to find out the job profile before hand. Give your answers in such a way that you project yourself as a match for the job profile. Tell about relevant subjects/ projects/ internships etc. Make a separate CV for Tata Steel highlighting your relevant strong points. You may ask about your job location etc at the end of the interview.
Skills

Skills Tested

Skill Tips
Although not specified by the company, all shortlisted candidates had a decent CGPA of above 8.0 and were B.Tech. students of the Mechanical Engineering stream. Command over any software such as C or Matlab will be helpful. Project work related to automation, coding, robotics etc will help. Basic knowledge of steel, metallurgy, casting processes etc is necessary.
Resources

Preparation materials

Courses
  • C language,
  • MATLAB,
Read Full post...
16

TATA Steel R&d interview

5.8k views
AnonymousFresherSelected
Application
I was interviewed on-campus for R&d role at TATA Steel
Interview Process
Resume Shortlist Interview
Round 1

Resume Shortlist

Interview Experience
I was directly shortlisted based on the CGPA and it seemed that they had the CGPA criteria greater than or equal to 8.
Round 2

Interview

Interview Questions
  • Question 1: Project Work?
  • Question 2: How could you relate your project work to Tata Steel?
  • Question 3: Why Tata Steel?
  • Question 4: What is your passion?
  • Question 5: Some applications of resistance welding process and tests on spot weld.
  • Question 6: If you have done some modeling work and have knowledgeof Ansys, solidworks?
Interview Tips
I did not do any specific preparation for the Tata Steel. You just need to have knowledge about your M. Tech Final Year project, and if it is relevant to Tata Steel, you have good chances of being selected.
General Tips
I did not do any specific preparation for the Tata Steel. You just need to have knowledge about your M.Tech final year project work, and if it is relevant to Tata Steel, you have good chances of being selected.
Read Full post...
17

TATA Steel interview

5.9k views
AnonymousFresherSelected
Application
I was interviewed on-campus for TATA Steel
Interview Process
Resume Shortlist Test HR Interview
Round 1

Resume Shortlist

Interview Experience
The resume to be submitted to a company must resemble their requirements
Interview Tips
Search for all the available models and prepare urself with different models
Round 2

Test

Interview Experience
Comprises of the aptitude paper and the subject related paper.
Interview Tips
Don't attempt the whole paper rather attempt with perfection. Its been long since JEE so just a reminder.
Round 3

HR Interview

Interview Experience
Try to answer technical questions.Don't repent in front of the interviewer to the wrong answers. Try to cope it up immediately with the right answers.
Interview Tips
face to face interview(S):Don't give frank answers in HR round
Read Full post...
18

TATA Steel R&d interview

5.8k views
AnonymousFresherSelected
Application
I was interviewed on-campus for R&d role at TATA Steel
Interview Process
Resume Shortlist Interview
Round 1

Resume Shortlist

Interview Experience
I was directly shortlisted based on the CGPA and it seemed that they had the CGPA criteria greater than or equal to 8.
Round 2

Interview

Interview Questions
  • Question 1: Project work ?
  • Question 2: Why TATA STEEL ?
  • Question 3: What is your passion ?
  • Question 4: Some application of resistance welding process and tests on spot welds.
  • Question 5: if you have done some modeling work and have knowledge of ansys, solidworks then it will add weight in your selection.
  • Question 6: How could you relate your project work to Tata Steel ?!
Interview Tips
I did not do any specific preparation for the tata steel.you just need to have knowledge about your m.tech final year project work, and if it is relevant to tata steel, you have good chances of being selected.
Read Full post...
19

TATA Steel Engineer trainee interview

123 views
AnonymousFresherNot Selected
Application
I was interviewed on-campus for Engineer trainee role at TATA Steel
Interview Process
Technical Interview
Round 1

Technical Interview

Interview Questions
  • Question 1: Tell me various forging defects
Interview Experience
I had given wrong answer
And then they are asking me rapid fire question and i had lost my confidence
Read Full post...

TATA Steel Tata Steel Intern profile interview questions

views
  • Question 1: Technical questions about mechanical engineering and steel making process.HR questions about general fit Questions about projects mentioned in resume - asked on Aug, 2015 in Roorkee
  • Question 1: About projects I did previously and few Metallurgical related questions of your field of interest - asked on Oct, 2015 in Varanasi

TATA Steel Tata Steel Management Trainee profile interview questions

views
  • Question 1: tell us about your family values, formative years - asked in
  • Question 1: questions were from engineering drawing,tom,solid mechanics,refrigeration and air conditioning and HR question - asked in Dhanbad
  • Question 1: Technical questions from steel making. General HR questions. - asked on Dec, 2016 in Mumbai

TATA Steel Tata Steel Management Trainee Technical profile interview questions

views
  • Question 1: Mostly technical, electrical engineering basics, back ground some HR questions like why Tata Steel and all - asked on Jan, 2013 in Pune
  • Question 1: Where do you see yourself 5 years down the line - asked on May, 2012 in Jamshedpur
  • Question 1: The very first question they asked me was about my hobbies and interests. - asked in Dhanbad
  • Question 1: Q. Tell me about yourself?Q. Tell me about one of my Intern project thoroughly and then cross questioning on it? - asked on Dec, 2016 in Kanpur, Uttar Pradesh

TATA Steel Tata Steel Manager IT profile interview questions

views
  • Question 1: How would you design an IT System for a mallWhy Tata SteelEthics questions - asked on Jan, 2012 in Bhubaneswar

TATA Steel Tata Steel Technical Graduate profile interview questions

views
  • Question 1: Technical and HR questions - asked on Sep, 2014 in

TATA Steel Tata Steel GET profile interview questions

views
  • Question 1: Why should we hire you? - asked on Dec, 2016 in New Delhi

TATA Steel Tata Steel Summer Trainee profile interview questions

views
  • Question 1: Why should I be taken for the role? - asked on Nov, 2015 in Mumbai
SignUp/Login
1-Step Login | Get unlimited access!